Dewin team not only can do OEM manufacturing according to customers’ drawings, but also work with customers to do collaborative design and development, and use our rich manufacturing experience to help customers do “Design For Manufacturing Rationalization.”
Dewin recently helped a client who is dealing in aftermarket motorcycle spare parts, who specializes in designing motorcycles, customize the aluminum bonnet. At first, the customer only had photos and no drawings, but the customer wanted to estimate the cost.

In fact, when there was only one simple drawing, many companies couldn’t quote or provide cost estimates. The customer asked many companies, but they did not get a satisfactory response. When the customer found us, our engineers estimated the approximate weight of the product based on the available information, and provided the customer with the initial price according to the weight.
Soon after, the customer designed and drew a draft of the design drawing, but the customer had no experience in the specific dimensional tolerance in production. Our engineers and customers held many video meetings to communicate the use scenario and assembly location of the product in detail, and assisted the customer to improve the product drawing to ensure that the product can be smoothly produced to meet the requirements of assembly and use.

Our principle is to “always let customers do multiple-choice questions, not fill in blank questions”, and provide a real one-stop service, so that customers’ problems can be terminated here at Dewin.
If you want to develop new products but have only one idea, please do not hesitate to contact our team:sa***@*******ch.com
Precision Manufacturing & Sourcing Specification Matrix
| Technical Dimension | Standard Commercial Grade | High-Precision OEM Export Grade | DEWIN Verification Protocol |
|---|---|---|---|
| Machining & Forming Tolerance | ISO 2768-m (±0.10 mm nominal) | ISO 2768-f (±0.01 mm – ±0.025 mm critical bores) | Calibrated 3D CMM & Air/Pin Gauging |
| Surface Roughness & Finish | Ra 1.6 – 3.2 µm as-machined / standard coat | Ra 0.4 – 0.8 µm precision ground / MIL-A-8625 anodized | Profilometer & Coating Thickness Gauge |
| Material & Alloy Certification | Supplier Mill Test Report (MTR) | Independent OES chemical & mechanical verification | EN 10204 3.1 + RoHS/REACH Compliance |
| Batch Inspection & Packaging | ISO 2859-1 (AQL 1.0 Major / 2.5 Minor) | Zero-defect critical features + VCI export crating | Pre-Shipment Inspection (PSI) Report |
Frequently Asked Questions
What engineering files are required to quote aluminum engine housing with DEWIN?
Provide 3D CAD models (STEP or IGES) along with 2D engineering drawings (PDF/DXF) specifying critical-to-quality (CTQ) tolerances, material grade, surface finish, and annual volume.
How does DEWIN verify dimensional accuracy and material compliance before shipment?
Every production lot undergoes incoming material spectrometer verification (EN 10204 3.1), First Article Inspection (FAI) via 2D/3D coordinate measuring machines (CMM), and AQL pre-shipment audits.
Can DEWIN support both low-volume prototype validation and mass production scaling in Vietnam and China?
Yes. DEWIN coordinates rapid CNC and bridge-tooling prototypes alongside high-tonnage production tooling across audited ISO 9001 and IATF 16949 partner factories in Vietnam and China.
