Interactive DFM Workstation
Upload your CAD through the quote wizard for an automated geometry read, manufacturability findings, an indicative price band, and matched Vietnam factories — or preview the workflow with demo data below.
Find your analysis on your quote status page
If your quote is active, DFM findings, the indicative estimate and factory matches are on your quote status page.
Open your quote status page ->See what an automated DFM pass looks like
When you upload CAD in the quote wizard, our system reads the geometry, runs deterministic manufacturability checks, builds an indicative price band, and shortlists audited Vietnam factories. Load the demo below to preview the output format.
DFM Diagnostics
DEMO DATAPreliminary manufacturability score
90/100
File Geometry
demo-bracket.step
bounding box 120 x 80 x 34 mm - 18,240 triangles
Findings
Thin walls / sparse geometry
Solid volume is under 5% of the bounding box. Verify minimum wall thickness: 0.8 mm for metals, 1.5 mm for plastics.
Custom tolerance callouts
Custom tolerances flagged on the drawing are reviewed line-by-line by a DEWIN engineer before quoting.
Indicative Estimate
Estimated Unit Price
$16.5 - $35.2 / unit
CNC machining · Aluminum · Qty 500
Estimated Lead Time
5-15 business days
- Moderate part complexity assumed
- EXW Vietnam, excludes shipping and duties
- Final pricing after engineering review of your files
Indicative range - final quote after engineering review
Recommended Factory Matches
Dai Anh Phat Mechanical
#1 matchNapec
#2 matchPreliminary automated check - a DEWIN engineer will confirm every finding before quoting.
Matches are preliminary recommendations from DEWIN's audited network - your engineer confirms final factory selection.
Standard Geometric Guidelines
Standard engineering guidelines comparing global milling constraints against Vietnam-based shop capabilities.
CNC Vertical Pockets
Standard high-speed milling spindles require a vertical corner radius. Internal corners with 90° shapes require secondary EDM wire burning. Specifying R ≥ depth/3 can save up to ~40% in tooling cost.
Sheet Metal Bends
Ensure holes and stamp cutouts are located at least 2x sheet thickness away from bend axes to prevent severe structural deformation and high defect rates at audited bending stations.
Draft Angles
For rapid injection molding in plastic resins, virtual vertical faces must feature draft angles (minimum 1.5°) to ensure smooth parts ejection from automated molding cavities.