Skip to main content

🇻🇳 178 profiles · Engineering review

Vietnam Manufacturing

Design and Development of Flex Pipe

January 17, 2023

Finished parts at Chau Hiep Phat Mold Mechanical, a DEWIN-audited Vietnamese factory

Recently, we helped an old customer solve a problem. He wanted to develop a flex pipe for vehicles.

Industrial 3D printing and rapid prototyping system at 3D PRINTING PLUS CO. LTD, a DEWIN-audited manufacturing facility

Supplier Selection

Industrial 3D printing and rapid prototyping system at NHAT LONG MECHANICAL ENGINEERING CO. LTD, a DEWIN-audited manufacturing facility

 

The drawings provided by the customer are too simple and lack of product details. However, based on our previous experience, we selected two suppliers from the existing suppliers to provide the customer with the quotation scheme of molds and products.

 

 

 

 

One-stop Service

Because it is at the beginning of the project, the customer doesn’t want to invest too much cost and refuses to open the mold. After learning about the situation, in order to help the old customer, the purchase of Dewin Dolphin Service Department contacted the original design manufacturer of these flex pipes in South Africa(who), purchased two batches of samples and mass production and provided the door to door delivery service for the customer.

Creating Value for Customers

After completing the customer’s order, Dewin didn’t stop there, but sent the sample to the cooperative supplier. After the engineer disassembled and subdivided the sample and analyzed it, the designer combined with the original drawing to make a complete drawing.

Then we took the initiative to contact the customer to ask if we needed to open the mold, because this is a long-term project for the customer, the follow-up demand is huge, the customer decided to open the mold after comprehensive consideration.

Industrial 3D printing and rapid prototyping system at 3D PRINTING PLUS CO. LTD, a DEWIN-audited manufacturing facilityAfter making according to the drawing, we immediately send the sample to the customer for testing, and after three sample submissions and PPAP processes, we can ensure that the product can meet the customer’s use requirements.

Finally, we successfully developed this product, helping customers reduce costs by 40%.

Video: Stainless steel pipe production at an audited Vietnamese manufacturer. (@dewintech)

Precision Manufacturing & Sourcing Specification Matrix

Technical DimensionStandard Commercial GradeHigh-Precision OEM Export GradeDEWIN Verification Protocol
Machining & Forming ToleranceISO 2768-m (±0.10 mm nominal)ISO 2768-f (±0.01 mm – ±0.025 mm critical bores)Calibrated 3D CMM & Air/Pin Gauging
Surface Roughness & FinishRa 1.6 – 3.2 µm as-machined / standard coatRa 0.4 – 0.8 µm precision ground / MIL-A-8625 anodizedProfilometer & Coating Thickness Gauge
Material & Alloy CertificationSupplier Mill Test Report (MTR)Independent OES chemical & mechanical verificationEN 10204 3.1 + RoHS/REACH Compliance
Batch Inspection & PackagingISO 2859-1 (AQL 1.0 Major / 2.5 Minor)Zero-defect critical features + VCI export cratingPre-Shipment Inspection (PSI) Report

Frequently Asked Questions

What engineering files are required to quote design and development of flex pipe with DEWIN?

Provide 3D CAD models (STEP or IGES) along with 2D engineering drawings (PDF/DXF) specifying critical-to-quality (CTQ) tolerances, material grade, surface finish, and annual volume.

How does DEWIN verify dimensional accuracy and material compliance before shipment?

Every production lot undergoes incoming material spectrometer verification (EN 10204 3.1), First Article Inspection (FAI) via 2D/3D coordinate measuring machines (CMM), and AQL pre-shipment audits.

Can DEWIN support both low-volume prototype validation and mass production scaling in Vietnam and China?

Yes. DEWIN coordinates rapid CNC and bridge-tooling prototypes alongside high-tonnage production tooling across audited ISO 9001 and IATF 16949 partner factories in Vietnam and China.

Manufacturing RFQ

Have a STEP Model or 2D Drawing for This Project?

Share your drawing, material, quantity and finishing requirements to begin a manufacturing quote. Confirm pricing, delivery and inspection requirements during the review.

Upload CAD & Get Quote →

This article is part of DEWIN's technical manufacturing engineering knowledge base. Factory-specific details come from each factory's profile page — please verify current information there or with our team.

Quick Sourcing Inquiry