Choosing between a down payment and a letter of credit for stamping parts can feel like gambling with your working capital. I see buyers wrestle with this decision on almost every project we manage.
Use a down payment (30–50%) for tooling and dies, and a letter of credit for the production balance on large or first-time stamping orders. For smaller repeat orders with trusted suppliers, skip the L/C fees and negotiate a modest deposit with balance on delivery.
Both methods have real trade-offs. One protects your supplier. The other protects you. Let me walk you through how we structure payments on real stamping projects across Vietnam and India.
How much down payment should I negotiate when sourcing stamping parts from Vietnam or India?
Last year, our Vietnam team helped a U.S. purchasing manager restructure a bracket order after the supplier demanded 70% upfront. We negotiated it down to 30% by splitting tooling from production.
Negotiate a 30–50% down payment for stamping tooling and dies, and 20–30% for the production run itself. Suppliers in Vietnam and India need upfront cash to buy steel and machine dies, but anything above 50% total shifts too much risk onto you as the buyer.

The down payment question is really two questions in one. Stamping projects have two cost buckets: the tooling and the parts. You should negotiate them separately.
Why suppliers demand cash upfront
A stamping die is a sunk cost. If you cancel the order, the supplier cannot sell that die to anyone else. It was cut for your part geometry, your hole patterns, your bend angles. When we audit stamping suppliers near Hanoi and Ho Chi Minh City, the smaller shops often cannot self-finance die steel and CNC machining 1 time. That is why a tooling deposit is close to non-negotiable in this industry.
Production parts are different. The supplier's material risk is lower, and the parts have at least some scrap value. So the deposit on the production run should be smaller.
Typical down payment benchmarks
| Cost Item | Typical Down Payment | Balance Terms |
|---|---|---|
| Tooling / dies | 30–50% upfront | Balance after sample approval |
| First production order | 30% upfront | 70% against shipping documents |
| Repeat production orders | 0–30% upfront | Balance on delivery or open account |
| Small trial runs | 50–100% upfront | Often prepaid due to low value |
Country-specific notes
In our experience, Vietnamese suppliers tend to accept 30% tooling deposits if a local intermediary vouches for the buyer. Indian suppliers often start at 50% and negotiate from there. Either way, always tie the tooling balance to approved first-article samples, not to a calendar date. That single clause protects you from paying full tooling costs for a die that produces out-of-spec parts.
Is a letter of credit worth the extra cost and paperwork for my custom stamping orders?
A buyer once asked me why he should pay bank fees when a wire transfer 2 is free. Then his previous supplier vanished with a $40,000 deposit. The math changed quickly.
A letter of credit is worth it for stamping orders above roughly $50,000, first-time suppliers, or high-risk regions. Bank fees of 0.75–2% are cheap insurance against total deposit loss. For small trial runs under $10,000, the fees and paperwork rarely justify the cost.
/ICHI-%20Photo/150-ton%20Stamping%20Press%20Machine%201.jpg)
The honest answer depends on order size and trust. Let me break down the real costs and the real protections.
What an L/C actually costs you
| Cost Component | Typical Range | Notes |
|---|---|---|
| Issuance fee | 0.75–2% of order value | Charged by your bank |
| Confirmation fee | 0.5–1.5% (if confirmed) | Adds a second bank guarantee |
| Amendment fees | Fixed fee per change | Common with spec revisions |
| Time cost | 3–7 extra days | Document review and processing |
On a $100,000 stamping order, expect $1,500–$3,500 in total banking costs. On a $5,000 sample run, those same fixed fees can eat 10% of the order value. That is why we almost never recommend L/Cs for trial orders.
What an L/C does and does not protect
Here is the part many buyers miss. An L/C pays on documents, not on quality. If the supplier ships boxes of scrap metal with a clean bill of lading 3 and matching invoice, the bank still pays. We learned to close this gap by tying document release to a third-party inspection certificate from firms like SGS or Bureau Veritas 4. The inspector checks the stamped parts at the factory. No passing certificate, no payment. That turns a paper guarantee into a real quality checkpoint.
Documentary discrepancies are the other trap. Custom stamping parts often carry long drawing numbers and revision codes. If the invoice says "Bracket Rev C" and the L/C says "Bracket Rev B," the bank can reject the documents. Keep L/C descriptions simple and let the inspection certificate carry the technical detail.
How do I protect my cash flow while still securing quality and on-time delivery from new suppliers?
Cash flow is the quiet killer in sourcing. Our team in Singapore structures payment schedules for U.S. clients precisely because a deposit paid in month one may not turn into sellable parts until month four.
Protect cash flow by staging payments against milestones: small tooling deposit, balance after sample approval, production payment after passed inspection, and negotiated 60–90 day terms once trust is built. Never let total prepayment exceed 30–40% of order value with a new supplier.

New suppliers create a double squeeze. They want cash early because they do not trust you yet. You want to pay late because you do not trust them yet. The way out is milestone-based payment, where money moves only when verifiable progress happens.
A milestone payment structure that works
- Pay 30% of tooling cost at purchase order. This funds die steel and machining.
- Pay the tooling balance only after you approve first-article samples against the drawing.
- Release the production deposit (if any) when raw material arrives at the factory.
- Pay the production balance after a passed final inspection, or against L/C documents that include the inspection certificate.
- After two or three clean shipments, negotiate open account terms of 60–90 days.
This structure caps your exposure at each stage. If the samples fail, you have lost only a partial tooling deposit, not the whole project budget.
Use intermediaries to bridge the trust gap
There is another lever most buyers overlook. A sourcing partner with local staff can absorb part of the payment risk. Because our Vietnam office audits suppliers in person and manages PPAP 5 and final inspection on site, we can offer clients open account terms even when the factory itself demands deposits. The intermediary effectively finances the gap and polices quality at the same time. For a purchasing manager who needs 60–90 day terms to match his own receivables cycle, that arrangement often beats any bank instrument on both cost and simplicity. On-time delivery also improves when someone walks the shop floor weekly instead of waiting for an email update.
Can I combine down payment and open account terms to reduce risk on large stamping parts orders?
The best payment structure I have ever negotiated for a stamped-bracket program used three instruments at once. Hybrid terms are not a compromise. They are the industry's mature standard.
Yes. The proven hybrid model pays a 30–50% down payment for tooling only, covers the first production runs with an L/C or inspection-linked payment, then transitions to open account terms of 60–90 days after two or three successful shipments.

Think of a large stamping program as a relationship with phases. Each phase deserves its own payment tool.
Matching the payment tool to the project phase
| Project Phase | Recommended Payment Method | Why It Fits |
|---|---|---|
| Tooling and die build | Down payment (30–50%) | Supplier needs capital; cost is sunk |
| First article and PPAP | Tooling balance after approval | Ties money to proven die quality |
| First production orders | L/C with inspection clause | Neither side has track record yet |
| Repeat production | Documents against payment (D/P) | Lower cost than L/C, moderate protection |
| Mature relationship | Open account, 60–90 days | Trust established; maximizes buyer cash flow |
The standby L/C trick for deposits
Here is an advanced move worth knowing. If a supplier demands a large deposit and you are nervous, ask the supplier's bank to issue a standby L/C in your favor equal to the deposit amount. This is called an advance payment guarantee 6. If the supplier fails to deliver, you draw on the standby L/C and recover your deposit. Not every Vietnamese or Indian supplier can arrange one, but the larger, better-financed factories can. A supplier who refuses even to discuss it is telling you something about their banking relationships.
Scale changes everything
On a $250,000 annual bracket program, a 1.5% L/C fee is $3,750 — trivial against the downside. On a $15,000 order, the same protection makes little sense, and a D/P arrangement 7 or an escrow-style platform gives you 80% of the safety at a fraction of the cost and paperwork. Match the instrument to the stakes, then let the relationship earn its way toward open account.
Conclusion
The down payment versus letter of credit decision is not either-or. Split tooling from production, stage payments against milestones, add inspection clauses, and let proven performance unlock open account terms.
Frequently Asked Questions
How much down payment should I negotiate when sourcing stamping parts from Vietnam or India?
Last year, our Vietnam team helped a U.S. purchasing manager restructure a bracket order after the supplier demanded 70% upfront. We negotiated it down to 30% by splitting tooling from production.
Is a letter of credit worth the extra cost and paperwork for my custom stamping orders?
A buyer once asked me why he should pay bank fees when a wire transfer 2 is free. Then his previous supplier vanished with a $40,000 deposit. The math changed quickly.
How do I protect my cash flow while still securing quality and on-time delivery from new suppliers?
Cash flow is the quiet killer in sourcing. Our team in Singapore structures payment schedules for U.S. clients precisely because a deposit paid in month one may not turn into sellable parts until month four.
Footnotes
1. ISO sets precision manufacturing standards relevant to CNC machining processes. ↩︎
2. Explains the fee-free but riskier payment method being contrasted with letters of credit. ↩︎
3. Defines the shipping document banks check under letter of credit terms. ↩︎
4. Leading third-party inspection firm referenced for verifying stamped part quality. ↩︎
5. AIAG defines PPAP, the standard process for approving production parts and dies. ↩︎
6. Explains the bank guarantee instrument used to protect tooling deposits. ↩︎
7. ICC governs documentary collection rules underlying D/P payment arrangements. ↩︎
/12-05-2025-Pictures%20-%20Name/Hydraulic%20press%201.jpg)