Skip to main content

🇻🇳 178 profiles · Engineering review

Vietnam Manufacturing

How to Clearly Describe OEM Requirements in an RFQ for Stamping Parts?

July 15, 2026

Finished parts at Minh Phat Huy, a DEWIN-audited Vietnamese factory

Guide to clearly describing OEM requirements in a stamping parts RFQ

I have seen too many RFQs for stamping parts land on our desks missing half the information a supplier needs to quote accurately.

To clearly describe OEM requirements in an RFQ for stamping parts, you must include precise drawing revisions, full material grade and thickness specifications, Geometric Dimensioning and Tolerancing callouts, quality validation protocols like PPAP, volume forecasts with Estimated Annual Usage, and explicit secondary operation details to eliminate supplier guesswork and inflated pricing.

The difference between a vague RFQ and a quote-ready one is not just a few extra data fields ASTM B633 1. It is the difference between receiving a competitive, accurate bid within days and spending weeks chasing clarifications. In the sections below, I break down exactly what your RFQ needs to include so suppliers quote right the first time.

What Technical Specifications Should I Include in My Stamping Parts RFQ?

A lesson I learned early on managing custom parts projects across Vietnam and China: a drawing without context is just a picture, not a specification.

Your stamping parts RFQ should include the latest revision-controlled 2D drawings with GD&T, 3D CAD models in STEP or IGES format, full material specifications with grade and temper, press tonnage guidance, progressive die tooling requirements, and a clear list of all secondary machining operations such as tapping, heat treatment, or plating.

Technical specifications checklist for stamping parts RFQ including drawings and materials

Start with Part Intent

Before anything else, your RFQ must state the part's intended use. Is it for an OEM vehicle launch program? An aftermarket replacement? A consumer electronics enclosure? Suppliers engineer and price differently based on intent. An OEM automotive program demands IATF 16949 2 compliance and full Production Part Approval Process documentation. An aftermarket part may accept simpler control plans. When our team reviews an incoming RFQ, the first thing we look for is this context. Without it, we default to the most conservative — and most expensive — assumptions.

Drawing and CAD File Requirements

Always provide both 2D PDF drawings and 3D CAD models. The PDF drawing serves as the legal quality acceptance document. The 3D model — preferably STEP or IGES — allows the supplier's tooling engineers to run Design for Manufacturing reviews and plan the die layout. Make sure the drawing states the current revision level clearly. Ambiguous or outdated revisions are the single most common cause of quote delays we encounter.

Geometric Dimensioning and Tolerancing

GD&T is where most RFQs either shine or fall apart. You need to separate critical-to-quality characteristics from general dimensions. If every hole on a stamped bracket is called out at ±0.05 mm, the supplier must build tooling to hold that across the board. But if only two mounting holes are truly critical and the rest can accept ±0.25 mm, say so. This distinction alone can reduce tooling complexity and part cost significantly.

Specification Element What to Include Why It Matters
Drawing Revision Latest revision number and date Prevents quoting on outdated geometry
3D CAD File STEP or IGES format Enables DFM review and tooling design
GD&T Callouts Critical vs. general tolerances separated Controls cost and focuses inspection effort
Material Spec Full grade, temper, thickness (e.g., SPCC, t=1.2 mm) Eliminates material ambiguity
Surface Treatment Plating type, coating spec, cosmetic requirements Defines secondary process scope
Secondary Ops Tapping, bending, assembly, marking Prevents hidden-cost surprises

Define Secondary Operations Explicitly

A stamped bracket may look simple in 3D, but the real cost drivers often hide in what happens after the press. Does the part need deburring on all edges? Is there a specific burr direction requirement? Does it require zinc plating per ASTM B633 3 or a powder coat finish? Our project engineers always ask buyers to list every post-stamping operation. When secondary machining operations like tapping or countersinking are missing from the RFQ, the quote comes back incomplete. Then both sides waste time on revisions.

✔ Providing both 2D drawings and 3D CAD models reduces quoting time and improves accuracy True
2D drawings define legal acceptance criteria while 3D models enable tooling design and DFM analysis. Together, they give suppliers the full picture needed to quote without assumptions.
✘ A fully dimensioned drawing alone is sufficient for a supplier to provide an accurate stamping quote False
Drawings lack context on part intent, volume, secondary operations, and quality validation requirements. Suppliers report that drawing-only RFQs force them to add 15–30% risk premiums to cover unknowns.
Video: Sample metal parts from audited Vietnamese factories in the DEWIN network. (@dewintech)

How Can I Communicate Quality Standards to Avoid Non-Conforming Parts?

One of the most painful conversations I have had with a U.S. buyer involved a batch of stamped motor brackets that met every dimension on the drawing but failed at the assembly line because nobody specified the required Ppk target.

To avoid non-conforming stamping parts, communicate quality standards by specifying your required quality management system certifications (ISO 9001 or IATF 16949), defining PPAP submission levels, setting process performance targets like Ppk ≥ 1.33, listing required testing such as salt spray or hardness checks, and requiring documented inspection reports including First Article Inspection and material test certificates.

Quality standards and PPAP requirements to prevent non-conforming stamping parts

Set the Quality Framework First

Your RFQ should state which quality management system standards the supplier must hold. For automotive OEM programs, IATF 16949 is non-negotiable. For industrial or consumer hardware, ISO 9001 4 is the baseline. We always confirm a supplier's certification status during our audit process before any production begins. But beyond certifications, you need to define what quality looks like for your specific part.

PPAP and Process Performance

The Production Part Approval Process 5 is the gold standard for OEM validation. Your RFQ should specify which PPAP level you require. Level 3 is the most common, requiring submission of sample parts, dimensional results, material certifications, a control plan, and process flow diagrams. You should also state your Ppk targets. Many automotive OEMs require Ppk ≥ 1.67 for critical-to-quality characteristics and Ppk ≥ 1.33 for all other measured features.

Quality Requirement OEM Program Aftermarket / Industrial
Certification IATF 16949 ISO 9001
PPAP Level Level 3 or higher Level 1 or waived
Ppk Target (Critical) ≥ 1.67 Not typically required
Ppk Target (General) ≥ 1.33 Not typically required
First Article Inspection Required with full report Often required, simpler format
Material Test Certificates Required per heat lot Required per shipment or lot
AQL for Final Inspection AQL 1.0 or tighter AQL 2.5 typical

Inspection and Testing Protocols

Spell out your inspection expectations in the RFQ. Do you need First Article Inspection per AS9102? Do you require in-process checks at defined intervals? What about final inspection — is it 100% check on critical dimensions or AQL-based sampling? For surface treatment and plating, specify the tests you expect: salt spray hours for corrosion resistance, adhesion testing for coatings, or hardness testing per Rockwell or Vickers scales 6.

I have seen cases where a buyer assumed the supplier would automatically run a 48-hour salt spray test on zinc-plated brackets. The supplier shipped parts with plating that looked fine visually but failed in humid environments within weeks. The root cause was simple: the RFQ never mentioned corrosion testing. Our quality control team now includes a standard checklist of testing requirements for every project, and we review it with the buyer before production starts.

Traceability and Documentation

Require specific deliverables: Material Test Certificates tracing raw material to mill heat numbers, dimensional inspection reports with actual measured values (not just pass/fail), heat treatment certificates if applicable, and plating thickness reports. For regulated industries, you may also need RoHS or REACH compliance 7 declarations. State these documentation requirements clearly in the RFQ so the supplier builds them into the production plan and cost.

✔ Specifying Ppk targets in the RFQ prevents disputes about process capability after production starts True
Ppk targets set measurable expectations for process performance. Without them, a supplier may deliver parts that pass individual inspections but come from an unstable process that produces long-term quality drift.
✘ Requiring ISO 9001 certification alone guarantees the supplier can meet automotive-grade quality standards False
ISO 9001 is a general quality management framework. Automotive OEM programs require IATF 16949, which adds specific requirements for PPAP, FMEA, control plans, and continuous improvement that ISO 9001 does not cover.

What Details Help Suppliers Quote My Stamping Project Accurately the First Time?

A buyer once sent us an RFQ with a beautiful 3D model, perfect GD&T, and the exact material spec — but no volume information. Without knowing whether we were quoting 500 pieces or 500,000, the tooling strategy, press selection, and unit cost would differ dramatically.

To help suppliers quote your stamping project accurately, include Estimated Annual Usage with batch sizes, a production ramp-up schedule, prototype versus production volume split, tooling ownership terms, packaging and labeling standards, Incoterms, ship-to location, and a raw material price indexation formula for long-term contracts.

Key project details suppliers need to accurately quote stamping parts

Volume and Timeline Details

The Estimated Annual Usage drives every major decision in a stamping quote: progressive die tooling 8 versus single-hit tooling, press tonnage selection, material purchasing strategy, and quality inspection frequency. A part with 10,000 EAU may justify a compound die. A part with 500,000 EAU almost certainly requires progressive die tooling for efficiency. Your RFQ should break volume down clearly.

Provide prototype quantity, pilot run quantity, initial production batch size, steady-state monthly or quarterly call-off rates, and the expected production lifespan in years. If you have a ramp-up schedule — say, 1,000 pieces per month in Q1 scaling to 5,000 per month by Q3 — include it. This helps the supplier plan capacity and raw material inventory.

Tooling Strategy and Ownership

This is a detail many buyers overlook, and it causes friction later. State clearly in the RFQ:

  • Who owns the tooling — the buyer or the supplier?
  • Who pays for tooling maintenance and refurbishment?
  • What is the expected tool life in number of strokes?
  • Is tooling cost amortized into piece price or quoted separately?

When we manage tooling for our clients, we always recommend separating tooling cost from piece price. This gives the buyer clear asset ownership and makes it easier to transfer tooling if needed. If you are unsure how to assess a supplier's tooling capabilities, learning how to verify supplier tooling capabilities when sourcing OEM stamping parts can help you ask the right questions.

Logistics, Packaging, and Pricing Terms

Your RFQ should define the Incoterm you expect (FOB, CIF, DDP, or others). Specify packaging requirements: does the part need rust-preventive VCI bags? Custom dunnage trays? Specific box dimensions or pallet configurations for automated warehouse handling? Labeling requirements — barcodes, lot numbers, country of origin markings — should all be listed.

For long-term contracts, consider including a raw material price indexation formula. Steel and aluminum prices fluctuate. A fair indexation clause — tied to a recognized commodity index — protects both buyer and supplier from market volatility and keeps the business relationship stable over years.

Quote-Accuracy Factor What to Specify Impact If Missing
Estimated Annual Usage Units per year, batch size Wrong tooling strategy, inaccurate unit cost
Ramp-Up Schedule Monthly volumes by quarter Capacity planning failures, delivery delays
Prototype vs. Production Separate quantities and timelines Supplier quotes production pricing for prototype volumes
Tooling Ownership Buyer or supplier, maintenance terms Disputes over tooling transfer and refurbishment
Incoterms 9 FOB, CIF, DDP, etc. Hidden logistics costs surface after award
Packaging Dunnage type, labeling, rust prevention Parts arrive damaged or improperly identified
Price Indexation Commodity index reference, adjustment frequency Price disputes during material cost swings

Request Design for Manufacturing Feedback

A smart RFQ invites the supplier to suggest geometry modifications that improve manufacturability. This Design for Manufacturing input can reduce scrap rates, simplify progressive die tooling, and lower piece cost. In our experience, a small radius change on a bent flange or a slight repositioning of a punched hole can save thousands of dollars in tooling costs and eliminate a secondary operation entirely. Encourage this collaboration in your RFQ — it signals to the supplier that you value their expertise and are open to optimization.

How Do I Specify Tolerances and Material Requirements for Custom Stamping Parts?

During a recent project for a set of stainless steel spring clamps, our tooling team spent two days clarifying whether the buyer's ±0.1 mm tolerance applied to the formed bend angle or only to the flat blank dimensions. That ambiguity delayed the quote by a week.

For custom stamping parts, specify tolerances by clearly separating critical-to-function dimensions (e.g., ±0.05 mm on mounting holes) from general tolerances (e.g., ±0.25 mm on non-functional edges), define datum references for GD&T, and call out full material specifications including alloy grade, temper condition, and nominal thickness with acceptable range.

custom stamping parts with annotated tolerances and material specifications

Why Tolerance Separation Matters

Not every dimension on a stamped part is equally important. A mounting hole that interfaces with a mating pin needs tight positional tolerance. An edge trim that sits inside an enclosure with 5 mm clearance does not. When buyers fail to separate critical-to-quality characteristics from general features, suppliers face a dilemma. They can either quote for the tightest tolerance across the entire part — which inflates cost — or they can guess which features matter most, which introduces risk.

I always recommend buyers use a tiered tolerance approach. Identify the three to five features that are truly critical to fit, function, or assembly. Call these out with specific Geometric Dimensioning and Tolerancing 10 symbols — true position, flatness, perpendicularity, or profile as needed. Then apply a general tolerance block to everything else.

Material Specification: Be Exact

Saying "stainless steel" is not a material specification. Saying "AISI 304, 2B finish, t=1.0 mm ±0.05 mm, per ASTM A240" is a material specification. The material grade and thickness directly affect formability, springback, tooling wear, and surface treatment compatibility. If you allow material substitutes — for example, accepting 304L instead of 304 — state it explicitly. If you require DFARS-compliant domestic sourcing, say so. If Mill Test Reports are required for every coil or sheet lot, include that in the RFQ.

Flatness, Burr Direction, and Cosmetic Standards

Stamped parts inherently have a burr side and a die side. For many applications, burr direction matters — especially if the part contacts a sealing surface, a circuit board, or a user-facing panel. Specify which surface is the "show surface" and define acceptable cosmetic conditions. For example: "Surface A: no visible scratches, dents, or tool marks. Surface B: standard production finish acceptable."

Flatness is another commonly under-specified requirement. A stamped bracket may come off the press with slight bowing. If your assembly requires flatness within 0.1 mm over a 50 mm span, you need to state that. Otherwise, the supplier will assume standard press flatness is acceptable, which can be 0.3 mm or more depending on material and geometry. For those new to these concepts, a guide on how OEM procurement beginners understand stamping processes and technical parameters can provide helpful foundational knowledge.

Putting It All Together: A Tolerance and Material Checklist

Here is a quick reference for what to include in the tolerance and material section of your stamping RFQ:

  • Full alloy designation with applicable ASTM or JIS standard
  • Nominal thickness with tolerance range
  • Temper or hardness condition
  • Surface finish requirement (2B, #4 brushed, mill finish, etc.)
  • Critical dimensions with GD&T callouts and datum references
  • General tolerance block for non-critical features
  • Flatness requirements with measurement span
  • Burr direction and cosmetic surface designations
  • Material substitute allowances or restrictions
  • Required certifications (MTR, DFARS, RoHS/REACH)

This level of detail may seem excessive, but every item on this list has been the root cause of a rejected shipment or a delayed quote in projects I have managed. Taking the time to be precise here saves weeks of back-and-forth later.

✔ Separating critical tolerances from general tolerances in an RFQ reduces both tooling cost and part price True
When suppliers know which features are critical, they can focus precision tooling and inspection resources on those areas while using standard processes for the rest, avoiding unnecessary cost.
✘ Standard tolerances automatically apply to all features on a stamped part unless otherwise specified False
Different suppliers use different default tolerance standards. Without explicit callouts, there is no guarantee the supplier’s “standard” matches the buyer’s expectation, leading to non-conforming parts.

Conclusion

A well-structured RFQ eliminates ambiguity, reduces supplier risk premiums, and gets you accurate quotes faster. Define your part intent, tolerances, materials, quality standards, and volumes clearly — your stamping project outcomes depend on it.

Frequently Asked Questions

What Technical Specifications Should I Include in My Stamping Parts RFQ?

A lesson I learned early on managing custom parts projects across Vietnam and China: a drawing without context is just a picture, not a specification.

How Can I Communicate Quality Standards to Avoid Non-Conforming Parts?

One of the most painful conversations I have had with a U.S. buyer involved a batch of stamped motor brackets that met every dimension on the drawing but failed at the assembly line because nobody specified the required Ppk target.

What Details Help Suppliers Quote My Stamping Project Accurately the First Time?

A buyer once sent us an RFQ with a beautiful 3D model, perfect GD&T, and the exact material spec — but no volume information. Without knowing whether we were quoting 500 pieces or 500,000, the tooling strategy, press selection, and unit cost would differ dramatically.

Footnotes


1. Cites the official standard governing zinc electroplating specifications mentioned in the article. ↩︎


2. References the automotive quality management standard mentioned throughout the article. ↩︎


3. Official standard reference for zinc electroplating mentioned in secondary operations. ↩︎


4. Provides background on the quality management standard referenced as baseline. ↩︎


5. Defines the PPAP validation process discussed extensively in the quality section. ↩︎


6. Background on hardness testing methods referenced for inspection protocols. ↩︎


7. Explains chemical compliance regulations required for regulated industries in the RFQ. ↩︎


8. Explains the tooling technology referenced for high-volume stamping production. ↩︎


9. Official source for international commercial trade terms used to define shipping responsibility. ↩︎


10. Explains the GD&T concept central to specifying tolerances correctly. ↩︎

Manufacturing RFQ

Have a STEP Model or 2D Drawing for This Project?

Share your drawing, material, quantity and finishing requirements to begin a manufacturing quote. Confirm pricing, delivery and inspection requirements during the review.

Upload CAD & Get Quote →

This article is part of DEWIN's technical manufacturing engineering knowledge base. Factory-specific details come from each factory's profile page — please verify current information there or with our team.

Quick Sourcing Inquiry