Skip to main content

🇻🇳 178 profiles · Engineering review

Vietnam Manufacturing

How to Describe OEM Requirements in an RFQ for Stamping Parts?

July 15, 2026

Cutting and drilling equipment at Hoang Thinh Mechanical Production, a DEWIN-audited Vietnamese factory

Guide to describing OEM requirements clearly in a stamping parts RFQ

I once lost three weeks on a stamping project because the buyer’s RFQ left out one line: whether dimensions applied before or after plating. That single omission cascaded into rejected samples, re-quoting, and a delayed launch that cost real money on both sides.

To describe OEM requirements in an RFQ for stamping parts, buyers must provide controlled drawings with Geometric Dimensioning and Tolerancing, specify exact material grade and thickness, define surface treatment timing, state Production Part Approval Process levels, and include estimated annual usage with clear delivery terms.

This guide walks through every detail your RFQ needs so suppliers can quote accurately, build compliant tooling, and deliver right the first time. Let’s break it down section by section.

What Key Details Should I Include in My Stamping Parts Drawing Package?

A recent project reminded our engineering team why drawing control matters so much. A U.S. buyer sent us a PDF drawing with no revision number, no 3D model, and only general tolerances. We had to send back twelve clarification questions before we could even begin quoting.

Your stamping parts drawing package must include the latest revision-controlled 2D and 3D CAD files, clearly marked critical-to-quality dimensions, a defined datum strategy tied to final assembly, and explicit notes on mating interfaces and inspection references.

Stamping parts drawing package with CAD files, datums, and critical dimensions

Why File Formats and Revision Control Come First

The drawing is the legal document of your part. If the supplier receives an outdated revision, every hour of quoting and tooling design is wasted. Always send the latest revision level in both 2D (PDF, DWG, or DXF) and 3D (STEP, STP, or IGS) formats. Our team in Vietnam checks every incoming drawing for a revision block before we even open the geometry. If the block is missing, we stop and ask. This one habit has saved us from quoting against obsolete designs more times than I can count.

Mark Your Critical-to-Quality Dimensions

Not every dimension on a stamped bracket carries the same weight. Some features mate to a shaft. Others are cosmetic clearances. The problem is that many RFQs treat every dimension equally. When you mark your critical-to-quality dimensions, you tell the supplier where to focus inspection and where to invest in tighter die tolerances. A good practice is to add a "Critical Interface" note directly on the drawing. For example: "CRITICAL INTERFACE: Bore mates to shaft on Part Rev C. Inspect after plating."

Datum Strategy Matters for Inspection

The datums you choose on the drawing should match how the part is held in the die, how it is machined (if applicable), and how it is inspected. If the datums do not align with the final assembly, the CMM report might show a good part that fails in the field. Our quality control team always reviews the datum scheme against the customer's assembly drawing before we finalize the inspection plan.

Drawing Package Element Required Format / Detail Why It Matters
2D Drawing PDF, DWG, or DXF with revision block Legal reference for quoting and inspection
3D Model STEP, STP, or IGS Enables tooling design and formability analysis 1
GD&T Callouts Per ASME Y14.5 or ISO 1101 Eliminates ambiguity on form, fit, and function
Critical-to-Quality Notes Flagged on drawing with CTQ symbol Focuses supplier inspection on key features
Datum Strategy Aligned with assembly and inspection fixtures Ensures CMM results match real-world performance
Mating Part References Part number and revision of mating component Prevents tolerance stack-up errors

Include a Formability Note When Possible

For complex geometries with deep draws or tight radii, ask your supplier to run a preliminary formability analysis or thinning map at the RFQ stage. This step identifies potential cracking or excessive thinning before you invest in progressive die tooling. We have caught problems at the quoting stage that would have cost tens of thousands of dollars in die rework if found later.

✔ A complete drawing package requires both 2D and 3D CAD files with the latest revision level True
Suppliers need 2D drawings for dimensioning and inspection references, and 3D models for tooling design and formability simulation. Missing either format causes delays.
✘ Sending only a 3D STEP file is enough for a supplier to quote a stamping part accurately False
A 3D model alone lacks GD&T callouts, tolerance notes, surface finish requirements, and revision history. Without these, suppliers cannot determine critical features or inspection criteria.
Video: Sample metal parts from audited Vietnamese factories in the DEWIN network. (@dewintech)

How Do I Specify Material and Tolerance Requirements for OEM Stamping Projects?

One trade-off we weigh on almost every stamping RFQ is this: the buyer writes "Stainless Steel" on the spec, but there are dozens of stainless grades with very different forming behavior, corrosion resistance, and cost. When we ask for clarification, the project often stalls for a week while the buyer checks with their engineering team.

For OEM stamping projects, specify the exact material grade, thickness in gauge or millimeters, temper condition, and whether substitutes are permitted. Define numeric tolerances for safety-critical features — typically ±0.05 mm with precision dies — and state clearly whether dimensions apply before or after any surface treatment and coating.

Specifying material grade, thickness, and tolerance for OEM stamping projects

Go Beyond the Alloy Family

Writing "Cold Rolled Steel" on an RFQ is like ordering "food" at a restaurant. You need to specify the grade (e.g., AISI 1010), the thickness (e.g., 1.2 mm ±0.05 mm), and the temper (e.g., half-hard). Each variable changes how the material behaves in a progressive die, how it welds, and how it accepts plating. Our purchasing team in China sources coil steel from certified mills. If the material grade specifications are vague, we cannot guarantee the mechanical properties the buyer needs.

You should also state whether substitute materials are allowed. If they are, define the approval criteria. For instance, "AISI 1008 may substitute for AISI 1010 if yield strength exceeds 250 MPa and elongation exceeds 30%." This gives the supplier flexibility to optimize cost without risking compliance.

The "Before or After" Dimension Trap

This is one of the most common pitfalls in stamping RFQs, and it causes real problems. If your part receives zinc plating 2 at 8–12 µm per side, a bore diameter that measures 10.00 mm before plating will measure roughly 9.976–9.984 mm after plating. If the drawing says 10.00 ±0.05 mm but does not say whether that applies before or after finishing, the supplier guesses. And guesses lead to rejected samples.

Scenario Bore Diameter (Before Plating) Plating Thickness (Per Side) Bore Diameter (After Plating) Passes Drawing Spec of 10.00 ±0.05 mm?
Dimension applies before plating 10.00 mm 0.012 mm 9.976 mm Only if spec means "before"
Dimension applies after plating 10.024 mm (compensated) 0.012 mm 10.00 mm Yes, if spec means "after"
No clarification given 10.00 mm 0.012 mm 9.976 mm Ambiguous — risk of rejection

Always add a note on the drawing: "All dimensions apply after plating unless otherwise noted." This one sentence prevents weeks of rework.

Tolerances: Numeric, Not "Standard"

The word "standard" means different things to different suppliers. In our experience exporting to the U.S., we have seen "standard tolerance" interpreted as anything from ±0.1 mm to ±0.5 mm depending on the shop. For safety-critical features, define numeric values. Precision stamping dies can hold ±0.05 mm on critical features. For non-critical features, you can reference a general tolerance block 3 such as ISO 2768-m. But never leave the critical ones to assumption.

Cosmetic Surface Requirements

For parts with a visible side — like the powder-coated black bracket in our product line — the RFQ must identify which surface is the "show side." This determines how the coil is oriented in the die, where the burr direction falls, and how the part is handled during secondary operations and assembly. A simple note like "Surface A is cosmetic — no scratches, dents, or tool marks permitted" saves everyone time.

✔ Specifying whether dimensions apply before or after plating is essential to avoid rejected samples True
Plating adds measurable thickness to every surface. Without this clarification, parts may pass die inspection but fail final assembly checks after finishing.
✘ Writing “Stainless Steel” on an RFQ is specific enough for a supplier to select the correct material False
There are over 150 grades of stainless steel with vastly different forming characteristics, corrosion resistance, and cost. Vague specs force suppliers to guess or quote the cheapest option.

What Quality Control and Inspection Standards Should I Define in My RFQ?

During a supplier audit at a stamping facility last year, I asked to see their IATF 16949 4 certification. They handed me a PDF. When I checked the IATF global registry, the certificate had expired six months earlier. That experience reinforced a lesson we share with every buyer: verify, do not trust.

Your RFQ should require IATF 16949 certification verified on the global registry, mandate Level 3 Production Part Approval Process submission including DFMEA, PFMEA, control plan, MSA, and Cpk studies, and define First Article Inspection with CMM reports for all critical-to-quality dimensions.

Quality control standards including IATF 16949, PPAP, and FAI for stamping RFQs

OEM vs. Aftermarket: Different Quality Worlds

The single most important line in your RFQ is the "Part Intent." Is this for an OEM program, a service part, or an aftermarket application? The answer determines the entire quality and compliance workflow. OEM programs require full PPAP, DFMEA, PFMEA, and IATF 16949 certification. Aftermarket parts often accept ISO 9001 5 and lower PPAP levels. If you do not state the intent, a supplier may quote aftermarket pricing and quality — then fail your OEM safety audit.

Requirement OEM Program Aftermarket / Service Part
Quality System IATF 16949 (verified on registry) ISO 9001 acceptable
PPAP Level Level 3 minimum Level 1 or 2 often sufficient
DFMEA / PFMEA Required Optional
Control Plan Detailed, feature-level General process control
Cpk Study Required (Cpk ≥ 1.67 for critical features) Often not required
First Article Inspection Full FAI with CMM report Dimensional check report
Traceability Full lot traceability Batch-level traceability

How to Verify IATF 16949 Certification

Do not accept a supplier's PDF certificate at face value. Go to the IATF global registry online and search by the supplier's name and site address. Confirm that the certification scope specifically covers stamping at the production site where your parts will be made. A supplier may hold IATF 16949 for their assembly plant but not for their stamping facility. Our team runs this check on every new supplier before we issue a purchase order. For a deeper look at the full verification process for stamping parts suppliers, we have a dedicated guide that covers additional audit steps.

Define Your Inspection Protocol Clearly

State what inspection method you require. CMM (Coordinate Measuring Machine 6) reports are standard for critical dimensions. For features that require Geometric Dimensioning and Tolerancing verification 7, specify whether optical or tactile measurement is required. Also define the inspection frequency — 100% inspection for launch quantities, then AQL-based sampling for steady-state production. Include any custom gauge requirements if your assembly uses go/no-go fixtures. For more on building a robust receiving process, see our guide on how to establish effective incoming inspection standards for stamping parts.

Tooling Health and Lifecycle Management

Your RFQ should also address tooling ownership and maintenance. Who owns the die? What are the mandatory maintenance intervals? How many hits before a die rebuild is required? These details protect your investment in progressive die tooling and ensure part quality does not degrade over a long production run. We recommend including a tooling health clause that requires the supplier to report die condition at defined intervals and to perform preventive maintenance at no additional charge.

How Can I Communicate Production Volume and Delivery Expectations to Avoid Delays?

A buyer once told me, "We need about 50,000 pieces a year, maybe more." That word "maybe" cost them money. The supplier quoted conservatively with expensive tooling steel and a high per-piece price to cover the risk of lower volumes. When the actual demand turned out to be 120,000 pieces per year, the buyer was locked into a price that assumed half the volume.

To avoid delays and inflated pricing, your RFQ must state estimated annual usage, batch size per release, launch versus steady-state volumes, a ramp-up plan with timeline, Incoterms, packing and labeling standards, and lot traceability requirements.

Communicating production volume and delivery expectations to avoid stamping delays

Why Volume Precision Drives Tooling Decisions

The estimated annual usage directly affects the supplier's tooling investment decision. For 10,000 parts a year, a simple compound die in D2 tool steel 8 might suffice. For 500,000 parts a year, the supplier needs a progressive die in carbide inserts running at high speed. If your volume forecast is vague, the supplier either over-invests (and passes the cost to you) or under-invests (and the die wears out prematurely, causing quality drift).

State your volumes in three tiers:

  1. Launch volume — how many parts for the first production run and PPAP samples.
  2. Steady-state annual volume — the expected annual demand once production stabilizes.
  3. Peak volume scenario — the maximum annual demand if the program exceeds forecast.

This gives the supplier the data to choose the right die material, press speed, and production schedule.

Ramp Plans Affect Everything

If your program starts at 5,000 pieces per month and ramps to 20,000 per month over six months, the supplier needs to plan press capacity, raw material procurement, and workforce allocation. Without a ramp plan, you will face one of two outcomes: either the supplier cannot scale up fast enough and you get late deliveries, or the supplier over-commits resources early and charges you for idle capacity.

Logistics Details That Prevent Hidden Costs

Packaging is often an afterthought in stamping RFQs, but it should not be. The wrong container type can damage parts in transit. Missing labeling standards can delay receiving at your warehouse. Here is what to include:

Logistics Element What to Specify Impact of Omission
Incoterms FOB, CIF, DDP, etc. Unclear cost responsibility for freight and duties
Packing Method Bulk, layered, individual wrap Parts damaged in transit, added sorting cost
Container / Pallet Type Returnable bins, expendable cartons Unexpected packaging surcharges
Labeling Standard Barcode, AIAG, custom format Receiving delays, manual data entry
Lot Traceability Heat number, coil lot, production date Cannot trace defects to root cause
Delivery Frequency Weekly, bi-weekly, monthly Inventory carrying cost, warehouse space

Digital Integration and Real-Time Tracking

More buyers now ask about their supplier's digital integration capabilities. Can the supplier connect via EDI for purchase orders and advance ship notices? Can they provide real-time production tracking through a shared dashboard? These capabilities reduce manual communication, prevent order errors, and give you visibility into production status. In our operations, we use ERP-integrated tracking so our U.S. clients can see production milestones without sending a single email.

Compliance and Environmental Requirements

Do not forget RoHS, REACH 9, and any industry-specific environmental regulations. For parts with surface treatment and coating, specify corrosion test requirements 10 (e.g., salt spray hours to white rust or red rust). If your company has ESG targets, state any requirements for recycled content or "green steel" sourcing in the RFQ. These are no longer niche requests — they are becoming standard in OEM procurement. Understanding what technical documents are needed for your first OEM stamping parts purchase can help ensure you cover all compliance paperwork from the start.

✔ Providing a detailed ramp plan with launch, steady-state, and peak volumes helps suppliers optimize tooling investment and pricing True
Volume tiers allow the supplier to select the right die material and press configuration, preventing both over-investment and premature tool failure.
✘ Approximate volume estimates like “about 50K per year” are sufficient for an accurate stamping quote False
Vague forecasts force suppliers to add cost buffers for risk. The difference between 50K and 150K per year can change tooling type, press selection, and per-piece pricing significantly.

Conclusion

A well-written RFQ for stamping parts is not just a price request — it is a technical specification that defines success. Cover your drawing package, material and tolerance details, quality standards, and volume expectations upfront, and you will get accurate quotes, compliant parts, and on-time delivery.

Frequently Asked Questions

What Key Details Should I Include in My Stamping Parts Drawing Package?

A recent project reminded our engineering team why drawing control matters so much. A U.S. buyer sent us a PDF drawing with no revision number, no 3D model, and only general tolerances. We had to send back twelve clarification questions before we could even begin quoting.

How Do I Specify Material and Tolerance Requirements for OEM Stamping Projects?

One trade-off we weigh on almost every stamping RFQ is this: the buyer writes "Stainless Steel" on the spec, but there are dozens of stainless grades with very different forming behavior, corrosion resistance, and cost. When we ask for clarification, the project often stalls for a week while the buyer checks with their engineering team.

What Quality Control and Inspection Standards Should I Define in My RFQ?

During a supplier audit at a stamping facility last year, I asked to see their IATF 16949 4 certification. They handed me a PDF. When I checked the IATF global registry, the certificate had expired six months earlier. That experience reinforced a lesson we share with every buyer: verify, do not trust.

Footnotes


1. Evaluation of a material’s ability to undergo plastic deformation without failure. ↩︎


2. Common surface treatment used to protect metal from corrosion. ↩︎


3. International standard for general tolerances of linear and angular dimensions. ↩︎


4. Stable Wikipedia overview of the automotive quality management standard, replacing the 403-error official site. ↩︎


5. International standard for quality management systems across various industries. ↩︎


6. Device used for measuring the physical geometrical characteristics of an object. ↩︎


7. Standard for defining engineering tolerances and communicating design intent. ↩︎


8. High-carbon, high-chromium tool steel used for long-run stamping dies. ↩︎


9. Directives restricting hazardous substances and regulating chemical safety in manufacturing. ↩︎


10. Authoritative Wikipedia page explaining the salt spray test (ASTM B117) referenced in the original link. ↩︎

Manufacturing RFQ

Have a STEP Model or 2D Drawing for This Project?

Share your drawing, material, quantity and finishing requirements to begin a manufacturing quote. Confirm pricing, delivery and inspection requirements during the review.

Upload CAD & Get Quote →

This article is part of DEWIN's technical manufacturing engineering knowledge base. Factory-specific details come from each factory's profile page — please verify current information there or with our team.

Quick Sourcing Inquiry