When our Vietnam office first handled a large stamping parts order for a U.S. client, a shipment of precision brackets got held at customs — not for quality issues, but because the origin marking rubbed off during transit. That single labeling failure cost weeks of delay and thousands in re-work fees, a painful lesson that reshaped how we manage every packaging and labeling detail with our Vietnam suppliers.
To ensure Vietnam suppliers meet packaging and labeling needs for stamping parts, importers must embed detailed specifications into RFQs, mandate permanent origin marking methods like die-stamping or etching, require VCI anti-rust protection, and conduct rigorous pre-shipment inspections covering both Vietnam’s Decree 37/2016 and U.S. 19 CFR Part 134 requirements.
This guide breaks down the exact steps we use — from initial supplier onboarding through final container sealing — to prevent labeling rejections, packaging damage, and customs delays on stamped sheet metal 1 components shipped from Vietnam to the United States.
How can I confirm my Vietnam stamping supplier understands my packaging specifications before production starts?
A lesson we learned early in our Vietnam operations: never assume a supplier interprets "standard export packaging" the same way you do. One of our first projects involved precision mounting brackets where the supplier used single-wall cartons with no internal dividers. Parts arrived scratched and nested together — completely unacceptable for our client's incoming inspection.
Confirm your Vietnam stamping supplier understands packaging specifications by providing ready-to-print label files, detailed packaging drawings, a written Quality Agreement with material and dimension specs, and by requiring a First Article Packaging submission with photographic documentation before full production begins.
/12-05-2025-Pictures%20-%20Name/Hydraulic%20press%201.jpg)
Start with a Detailed RFQ
The Request for Quotation is where everything begins. Most packaging failures happen because the RFQ was vague. When we issue an RFQ to our Vietnam partner factories, we include a dedicated packaging section that specifies box dimensions, material grade, stacking limits, internal cushioning type, and labeling placement. We also attach reference photos from previous approved shipments.
Here is a sample of what our RFQ packaging section covers:
| RFQ Packaging Item | What to Specify | Why It Matters |
|---|---|---|
| Outer carton material | Double-wall corrugated, burst strength ≥ 200 PSI | Prevents crushing during container loading |
| Inner dividers | Custom plastic trays or corrugated inserts | Prevents metal-to-metal contact on stamped parts |
| Part orientation | Flat-lay with flanges facing up | Avoids bending thin tabs during stacking |
| Palletization | ISPM 15 2 compliant heat-treated wood or plastic | Meets international phytosanitary rules |
| VCI protection | VCI poly bags or VCI paper wraps | Prevents oxidation on bare steel surfaces |
| Label placement | Front-center of each carton, 100×150mm minimum | Ensures barcode scanner readability |
Implement a First Article Packaging Protocol
Before we approve mass production, we require every supplier to complete a First Article Packaging (FAP) submission. The supplier packs a small batch — typically 10 to 20 pieces — exactly as they plan to pack the full order. They photograph every layer: the pallet base, edge protectors, carton arrangement, internal dividers, VCI wrapping, and label placement.
Our Vietnam team reviews these photos against the approved packaging drawing. If anything deviates — wrong divider material, missing desiccant packs, label in the wrong position — we flag it immediately. This catches problems before thousands of parts are packed incorrectly.
Hold a Pre-Production Packaging Meeting
We schedule a video call or on-site meeting specifically for packaging. This is separate from the production kick-off meeting. During this session, we walk through every packaging layer with the supplier's warehouse team — not just the sales contact. The warehouse workers are the ones who actually pack the parts, so they need to understand the requirements firsthand.
We also confirm the supplier's label printing capability. For stamping parts, labels often need to include batch numbers, HS codes, net and gross weights, and shipping mark specifications. If the supplier's printer cannot produce barcodes at the required resolution, we know before production starts — not when the container is about to ship.
What labeling standards should I require for stamping parts shipped from Vietnam to the US?
The dual-compliance challenge tripped us up more than once. Vietnam has its own labeling laws under Decree 37/2016/ND-CP (updated by Decree 50/2024), and the U.S. enforces country-of-origin marking under 19 CFR Part 134 3. Missing either one can result in rejected shipments, customs penalties, or products that cannot legally be sold.
For stamping parts shipped from Vietnam to the U.S., require permanent country-of-origin marking on each part using die-stamping, etching, or engraving per 19 CFR Part 134, plus Vietnamese-language labels with product name, manufacturer address, principal material, and origin for compliance with Vietnam's Decree 37/2016.

U.S. Country-of-Origin Requirements
U.S. Customs requires every imported article to bear a country-of-origin mark that is permanent, legible, and visible without disassembly. For stamped sheet metal components like mounting brackets and clips, acceptable marking methods include die-stamping 4:
- Die-stamping directly into the metal surface
- Etching (chemical or laser, typically 0.005–0.010 inches deep)
- Engraving using CNC or manual tools
- Die-sinking during the stamping process itself
Temporary stickers are not acceptable for metal parts. U.S. Customs will reject parts marked with adhesive labels that can peel off. The word "Vietnam" alone is sufficient in most cases. You only need "Made in Vietnam" if the product name or branding could mislead consumers about the origin.
Vietnam's Domestic Labeling Laws
Even though these parts are for export, Vietnam's regulations still apply to the labeling on goods produced within the country. Under Decree 37/2016 and its 2024 update, every label must include:
| Mandatory Label Element | Requirement | Notes |
|---|---|---|
| Product name | In Vietnamese | English permitted but must be smaller font |
| Manufacturer name & address | Full legal name and factory address | Required even for OEM/contract manufacturing |
| Country of origin | "Việt Nam" in Vietnamese | Must appear on every packaging level |
| Principal material | e.g., "Thép" (Steel), "Nhôm" (Aluminum) | Mandatory for metal goods |
| Supplementary label | Vietnamese translation if original is in English | Must be affixed before goods leave the factory |
For metal fabrication quality assurance, this means our team verifies that the supplier prints the correct material name — not just "metal" but the specific alloy or base material. If parts are refurbished, the label must state "sản phẩm tân trang làm mới" in Vietnamese.
Marking Placement on Stamping Parts
A common mistake we see: suppliers mark the carton but not the part itself. For stamping parts, the origin mark must be on the product. If the part is too small for legible marking, the immediate container (bag or box holding that single part) must carry the mark. We always specify the exact location on the technical drawing — usually a flat, non-functional surface away from mounting holes or bending zones.
Our engineers add a "MARKING ZONE" callout on every drawing we send to Vietnam suppliers. This removes ambiguity. The precision tool and die team at the factory can then incorporate the marking into the stamping die itself, which is the most permanent and cost-effective method.
How do I prevent packaging damage during long-distance shipping from Vietnam suppliers?
One of the most frustrating calls I have ever received was from a U.S. client telling me that an entire pallet of zinc-plated stamping brackets arrived with white rust — oxidation spots caused by moisture trapped inside improperly sealed bags. The parts themselves were dimensionally perfect. The precision tool and die work was flawless. But the packaging failed, and the client had to reject the shipment.
Prevent packaging damage during long-distance shipping from Vietnam by requiring VCI anti-rust protection for all bare metal surfaces, using multi-layered internal dividers, specifying reinforced edge protectors with heavy-duty shrink wrap, and mandating ISPM 15 compliant export-grade palletization to survive 25–35 days of maritime transit.

Understanding the Transit Environment
Ocean freight 5 from Vietnam to the U.S. West Coast takes roughly 18–22 days. East Coast shipments via the Suez or Panama Canal can take 30–40 days. During this time, containers experience temperature swings of 20–40°C daily, causing condensation inside the container — commonly called "container rain." This moisture is the number one enemy of bare steel and zinc-plated stamping parts.
Beyond moisture, containers endure constant vibration from the ship's engines and rough seas. Parts shift inside cartons. Cartons shift on pallets. Without proper restraint, precision-stamped flanges bend, edges dent, and surface finishes scratch.
A Layered Protection Approach
We use a four-layer protection system for every stamping parts shipment:
Layer 1 — Part-level protection. Each part or small group of parts goes into a VCI poly bag with a desiccant sachet. The VCI (Volatile Corrosion Inhibitor 6) material releases molecules that form a protective layer on the metal surface, blocking oxidation. This is critical for raw steel or zinc-galvanized components.
Layer 2 — Separation. Custom plastic trays or corrugated dividers prevent metal-to-metal contact. For parts with sharp folded edges or angular bent flanges — like the mounting brackets we frequently ship — even minor contact during vibration causes scratches and burr damage.
Layer 3 — Carton integrity. We specify double-wall corrugated cartons with a minimum burst strength of 200 PSI. Each carton is sealed with reinforced tape and has clear shipping marks on two sides.
Layer 4 — Pallet stability. Cartons are stacked on ISPM 15 compliant heat-treated pallets (or plastic pallets for clients with strict phytosanitary requirements). The load is wrapped with heavy-duty stretch film and fitted with reinforced edge protectors on all four vertical corners. This counteracts the mechanical stress typical of Vietnam's logistics infrastructure, where roads between factory and port can be rough.
Eco-Friendly Options Are Emerging
Several of our clients now require packaging that aligns with their ESG mandates. We have started sourcing biodegradable VCI films and recyclable pulp-based cushioning from Vietnamese suppliers. These materials perform comparably to traditional options and reduce disposal costs for the end-user. However, we always validate corrosion protection performance through a 30-day humidity chamber test before approving any new eco-friendly material for production use.
What quality checks should I conduct to verify packaging and labeling compliance before goods leave Vietnam?
The most expensive place to discover a packaging or labeling error is at the destination port. Our rule is simple: if it was not checked before the container was sealed in Vietnam, assume it will be wrong. That mindset has saved our clients from countless customs clearance documentation 7 nightmares.
Before goods leave Vietnam, conduct a structured pre-shipment inspection that includes a dedicated packaging and labeling checklist covering origin mark permanence, barcode readability, carton drop-test results, VCI presence, correct label content per both Vietnamese and U.S. regulations, and photographic documentation of every packing layer.

Building a Pre-Shipment Inspection Checklist
Our Vietnam team conducts a pre-shipment inspection (PSI) on every order. The packaging and labeling portion is a separate section of the checklist — not an afterthought buried under dimensional checks. Here is a simplified version of what we verify:
| Inspection Item | Method | Pass Criteria |
|---|---|---|
| Origin mark on part | Visual + scratch test | "Vietnam" legible, does not rub off with thumb pressure |
| Vietnamese label content | Visual comparison to approved template | All 5 mandatory elements present in correct language |
| Barcode readability | Handheld scanner test | Scans correctly on first attempt at 30 cm distance |
| VCI bag seal | Visual + squeeze test | Bag fully sealed, no tears, VCI indicator strip active |
| Desiccant presence | Visual count | Minimum 1 sachet per bag, correct gram weight |
| Carton integrity | Drop test (single carton from 76 cm) | No corner crush, parts undamaged after drop |
| Pallet ISPM 15 stamp | Visual | Heat treatment mark clearly visible on pallet |
| Shipping marks | Visual comparison to packing list | Correct PO number, quantity, gross/net weight, HS code |
| RoHS 8/REACH documentation | Document review | Certificates match material batch numbers on labels |
The Supplier Scorecard
We maintain a supplier scorecard that tracks packaging and labeling compliance as a weighted category — typically 20% of the total score. This sits alongside production quality, on-time delivery, and communication responsiveness. When a supplier scores below our threshold on packaging for two consecutive shipments, we escalate to a factory audit. Our factory audit protocols include a walkthrough of the packing area, a review of label printing equipment, and verification that warehouse staff have been trained on the approved packaging procedure.
Who Is Responsible?
A question we get frequently from U.S. purchasing managers: if a label is wrong, who is liable? Under Vietnamese law, the manufacturer is responsible for the truthfulness of the original label. But under U.S. law, the importer of record bears ultimate responsibility for ensuring goods meet 19 CFR Part 134. This means you cannot simply blame the supplier if customs rejects a shipment. The importer must verify before shipping.
This is exactly why our clients value having a local team in Vietnam. Our seven team members conduct on-the-ground inspections, attend packing operations, and verify every label before the container door closes. It is the last line of defense — and often the most important one for smooth customs clearance documentation and overall metal fabrication quality assurance.
Smart Labeling and Traceability
We are increasingly adopting serialized QR codes on outer cartons. Each code links to a digital record containing the heat lot number, chemical composition report (for RoHS and REACH 9 compliance verification), production date, and inspection results. This gives our clients instant mobile access to traceability data and speeds up their incoming inspection process. It also provides an audit trail if any quality dispute arises months after delivery.
Conclusion
Getting packaging and labeling right on Vietnam-sourced stamping parts requires proactive specification — not reactive fixing. Embed every requirement into your RFQ, validate through First Article Packaging, and inspect before the container seals. A local presence in Vietnam and structured pre-shipment inspections are your strongest safeguards against costly customs delays.
Frequently Asked Questions
Who Is Responsible?
A question we get frequently from U.S. purchasing managers: if a label is wrong, who is liable? Under Vietnamese law, the manufacturer is responsible for the truthfulness of the original label. But under U.S. law, the importer of record bears ultimate responsibility for ensuring goods meet 19 CFR Part 134. This means you cannot simply blame the supplier if customs rejects a shipment. The importer must verify before shipping.
How can I confirm my Vietnam stamping supplier understands my packaging specifications before production starts?
A lesson we learned early in our Vietnam operations: never assume a supplier interprets "standard export packaging" the same way you do. One of our first projects involved precision mounting brackets where the supplier used single-wall cartons with no internal dividers. Parts arrived scratched and nested together — completely unacceptable for our client's incoming inspection.
What labeling standards should I require for stamping parts shipped from Vietnam to the US?
The dual-compliance challenge tripped us up more than once. Vietnam has its own labeling laws under Decree 37/2016/ND-CP (updated by Decree 50/2024), and the U.S. enforces country-of-origin marking under 19 CFR Part 134 3 . Missing either one can result in rejected shipments, customs penalties, or products that cannot legally be sold.
Footnotes
1. Background concept defining the material type used in stamping parts production. ↩︎
2. International standard governing wood packaging treatment referenced for palletization compliance. ↩︎
3. Official Electronic Code of Federal Regulations source for U.S. country of origin marking requirements. ↩︎
4. Background concept explaining the metal stamping process referenced for permanent marking methods. ↩︎
5. Official International Trade Administration resource for maritime transportation and global supply chain services. ↩︎
6. Background concept explaining VCI technology used for anti-rust protection. ↩︎
7. Official CBP guidance on import documentation requirements relevant to customs clearance process. ↩︎
8. Official regulatory reference for RoHS compliance mentioned in inspection documentation. ↩︎
9. Official European Commission overview of the REACH regulation for chemical safety and compliance. ↩︎
