Skip to main content

🇻🇳 178 profiles · Engineering review

Vietnam Manufacturing

How Can EVFTA Reduce Tariff Costs When Sourcing Stamping Parts from Vietnam?

July 17, 2026

High-tonnage mechanical and hydraulic stamping press at AN THANH TECHNOLOGY COMPANY LIMITED, a DEWIN-audited manufacturing facility

EVFTA tariff reduction guide for sourcing stamping parts from Vietnam

When our team in Vietnam first helped a European client navigate EVFTA tariff benefits on stamping parts, the savings surprised everyone — but so did the paperwork complexity.

EVFTA can reduce tariff costs on stamping parts from Vietnam by eliminating up to 99% of import duties between the EU and Vietnam. Precision metal stamping components qualify for preferential rates through proper HS code classification, EUR.1 certificates of origin, and compliance with rules of origin requirements under the agreement’s tariff elimination schedule.

This article walks through the key mechanisms, documentation steps, cost advantages, and compliance risks that purchasing managers need to understand before leveraging EVFTA for custom stamping part sourcing.

How does EVFTA actually lower my import duties on stamping parts from Vietnam?

A lesson we learned early while coordinating shipments from our Vietnamese partners to EU-based buyers: the tariff reduction is real, but the timeline and product classification matter more than most people expect EUR.1 Certificate of Origin 1.

EVFTA lowers import duties on stamping parts by following a phased tariff elimination schedule. The EU removed 71% of duties on Vietnamese goods immediately in 2020, with 99.2% eliminated by 2027. Stamping components under specific HS codes can qualify for 0% duty rates through this schedule.

Phased EVFTA tariff elimination schedule lowering import duties on Vietnamese stamping parts

Understanding the Tariff Elimination Timeline

The EVFTA is not a single switch that turns all tariffs to zero overnight. It uses an asymmetric liberalization timeline. The EU, as the more developed economy, removes tariffs faster. Vietnam gets more time.

For stamping parts — brackets, clips, mounting hardware, and sheet metal fabrication components 2 — the relevant HS codes typically fall under chapters 72–73 (articles of iron or steel) or chapter 84 (machinery parts). The EU's MFN (Most-Favored-Nation) rate on these items from non-FTA countries often sits between 2.7% and 6.5%. Under EVFTA, these rates drop to 0% on a defined schedule.

Here is a simplified breakdown of how the tariff elimination works for typical stamping part categories:

Category Typical HS Chapter EU MFN Rate (No FTA) EVFTA Rate (2024) EVFTA Rate (2027+)
Steel mounting brackets 73.26 2.7% – 3.7% 0% 0%
Stamped machinery parts 84.87 1.7% – 2.7% 0% 0%
Automotive stamping components 87.08 3.0% – 4.5% 0% – 1.5% 0%
Spring clips / clamps 73.18 3.7% 0% 0%
Zinc-galvanized hardware 73.07 0% – 2.7% 0% 0%

What This Means in Practice

On a $500,000 annual spend on stamping parts, even a 3.7% duty rate means $18,500 in avoidable costs. Over a multi-year sourcing contract, that adds up fast. We have seen European purchasing managers treat this as a rounding error at first — until they multiply it across dozens of part numbers.

The key step is identifying the correct 8-digit HS code. Misclassification can mean the difference between 0% duty and full MFN rates. Our team works closely with customs brokers on both sides to verify each code before the first shipment leaves the factory floor.

The Competitive Edge Over Non-FTA Origins

This is where the advantage becomes clear. If a buyer in Germany sources the same stamped bracket from China, they pay the standard MFN rate — often 3.7% or higher. From Vietnam under EVFTA, that rate is 0%. The tariff gap directly improves the buyer's landed cost and makes Vietnam a more attractive origin for precision metal stamping.

Sourcing Origin Duty Rate to EU FTA Status Notes
Vietnam (EVFTA) 0% Active FTA Full tariff elimination by 2027
China 2.7% – 6.5% No FTA Standard MFN rates apply
Thailand 2.7% – 3.7% No FTA (under negotiation) No preferential access yet
India 2.7% – 4.5% No FTA GSP may apply for some items

This table illustrates why supply chain optimization increasingly points toward Vietnam for EU-bound stamping components.

✔ EVFTA eliminates 99.2% of EU tariffs on Vietnamese goods by 2027 True
The EU committed to removing nearly all tariff lines within seven years of the agreement’s entry into force in August 2020, covering 99.7% of Vietnam’s export revenue to the EU.
✘ EVFTA means all stamping parts automatically enter the EU at 0% duty False
Tariff preferences only apply when parts meet rules of origin and proper documentation is submitted. Without a valid EUR.1 certificate or correct HS code classification, standard MFN rates still apply.
Video: Sample metal parts from audited Vietnamese factories in the DEWIN network. (@dewintech)

What certificate of origin do I need to qualify for EVFTA tariff benefits?

One of our clients recently shipped a batch of stamped mounting brackets to the Netherlands. The goods arrived, but customs held them for three days because the EUR.1 certificate had an error in the HS code field. That delay cost more than the tariff savings on that shipment.

To qualify for EVFTA tariff benefits, exporters must obtain a EUR.1 Certificate of Origin issued through Vietnam's National Single Window Portal for shipments above €6,000. For shipments under €6,000, exporters can self-certify origin on the commercial invoice. The certificate proves the stamping parts meet EVFTA rules of origin.

EUR.1 Certificate of Origin required to qualify for EVFTA tariff benefits on stamping parts

The EUR.1 Certificate Process

The EUR.1 certificate is the standard proof-of-origin document under EVFTA. It is issued by Vietnam's Ministry of Industry and Trade 4 (MOIT) through the electronic portal at ecosys.gov.vn. The Vietnamese stamping manufacturer or exporter applies for it before shipment.

Here is a step-by-step overview of the certification workflow:

  1. Identify the HS code — The exporter determines the correct 8-digit code for each stamping part.
  2. Verify origin qualification — The part must meet product-specific rules of origin. This usually requires either a change in tariff classification (CTC) at the 4-digit heading level, or a value-added content 5 (VAC) of 40% or more.
  3. Prepare supporting documents — Bill of materials, purchase records for raw materials, production process records, and commercial invoices.
  4. Submit EUR.1 application — Through the National Single Window Portal, the exporter submits the application along with supporting documentation.
  5. Receive the certificate — After review, the MOIT issues the EUR.1 certificate, which accompanies the shipment.
  6. Present at EU customs — The EU importer declares the EVFTA preferential rate and submits the EUR.1 during customs clearance procedures.

Self-Certification for Smaller Shipments

For exports valued under €6,000, the exporter can skip the formal EUR.1 process. Instead, they include a declaration of origin directly on the invoice. This is simpler but still requires the exporter to maintain records proving the parts genuinely meet origin criteria.

In our experience, even for small shipments, we recommend keeping a full documentation file. If EU customs conducts a post-clearance audit, the importer must be able to produce evidence. Missing records can void the tariff preference retroactively — and result in back-payment of duties plus penalties.

The REX System and Future Digitalization

The EU's Registered Exporter (REX) system 6 is another self-certification mechanism. Under EVFTA, Vietnamese exporters registered in the REX database can issue statements of origin on commercial documents. This system is gaining traction as Vietnam's trade compliance infrastructure modernizes.

We have noticed that the digitalization of certification — moving from paper-based EUR.1 forms to electronic submissions — has improved turnaround times significantly. Applications that used to take 3–5 business days now often clear in 1–2 days through the portal.

Bilateral Cumulation: A Hidden Advantage

EVFTA allows bilateral cumulation. This means if a Vietnamese stamping factory uses EU-origin raw materials — say, specialty steel from Germany — those materials count as Vietnamese content when calculating the value-added threshold. This is a powerful tool for complex assemblies where the stamping die itself or certain alloy inputs come from Europe.

For purchasing managers sourcing custom parts, this means you can strategically choose material origins to ensure your Vietnamese supplier meets the 40% VAC requirement more easily.

✔ EU-origin materials used in Vietnamese stamping count toward the local content requirement under bilateral cumulation True
EVFTA’s cumulation provisions treat EU-origin inputs as Vietnamese content for the purpose of calculating value-added percentages, making it easier for complex assemblies to qualify.
✘ Any stamping part exported from Vietnam automatically qualifies for EVFTA preferences regardless of raw material origin False
Parts must meet product-specific rules of origin. If the raw steel is sourced from a third country like China and insufficient transformation occurs in Vietnam, the part may not qualify for preferential treatment.

Can I combine EVFTA savings with Vietnam's competitive stamping manufacturing costs?

During a recent supplier audit at a stamping facility outside Ho Chi Minh City, I watched operators run a progressive die press producing over 8,000 mounting brackets per shift. The labor cost per piece was roughly 40% lower than a comparable operation I had visited in Guangdong the month before.

Yes, EVFTA tariff savings compound directly with Vietnam's lower manufacturing costs. Vietnamese stamping factories offer labor rates 30–50% below China's coastal provinces, and when combined with 0% import duties to the EU, the total landed cost advantage can reach 20–30% compared to non-FTA sourcing origins.

Combining EVFTA tariff savings with Vietnam's competitive stamping manufacturing costs

The Cost Stack: Beyond Tariffs

Tariff reduction is only one layer of the cost advantage. To truly evaluate whether sourcing stamping parts from Vietnam makes financial sense, a purchasing manager needs to look at the full landed cost stack.

Here is how that stack typically compares between Vietnam (with EVFTA) and China (without an EU FTA):

Cost Component Vietnam + EVFTA China (No EU FTA) Difference
Raw material (steel/alloy) Similar Similar ~0%
Labor cost per unit $0.03 – $0.08 $0.06 – $0.15 –40% to –50%
Tooling (progressive dies) $8,000 – $25,000 $6,000 – $20,000 +10% to +25%
Import duty to EU 0% 2.7% – 6.5% –100%
Freight to EU (FCL) $2,800 – $4,200 $2,200 – $3,500 +15% to +25%
Compliance / documentation $200 – $500 per shipment Minimal Added cost
Total landed cost index Base +15% to +28% Vietnam wins

Where Vietnam Excels in Stamping

Vietnam's sheet metal fabrication sector has matured significantly over the past five years. The factories we work with now run CNC turret presses, progressive stamping lines, and automated bending cells that were rare in the country a decade ago. Quality levels for mid-to-high tolerance parts — the kind our clients typically need — are now competitive with established Chinese suppliers.

The combination of competitive labor, improving equipment, and EVFTA's import duty exemptions creates a compelling total cost picture. For our European buyers, this has become a decisive factor in supply chain decisions.

Tooling Cost: The One Area Where Vietnam Is Still Catching Up

Tooling — especially complex progressive dies for multi-station stamping — can cost 10–25% more in Vietnam than in China. This is partly because Vietnam still imports some specialty tool steel and relies on a smaller pool of experienced die makers.

However, we have found a practical workaround. Some of our clients ship their existing tooling from China or the EU to Vietnamese stamping shops. Since the die is already amortized, the per-piece production cost in Vietnam drops further. And under EVFTA's bilateral cumulation rules, EU-origin dies can even help meet the value-added threshold for origin qualification.

The Green Cost Synergy

An emerging angle worth noting: Vietnam's growing adoption of renewable energy in manufacturing can help EU importers prepare for the Carbon Border Adjustment Mechanism 7 (CBAM). Stamping facilities powered partly by solar or hydro energy will have a lower embedded carbon footprint. While CBAM is still in its transitional phase, sourcing from greener Vietnamese factories could offset future carbon costs that would otherwise erode tariff savings.

What are the risks of misapplying EVFTA rules when sourcing custom stamping parts?

A trade compliance specialist we consulted last year shared a cautionary example: an EU importer had been claiming EVFTA preferences on stamped automotive brackets for over a year. During a post-clearance audit, customs discovered the Vietnamese supplier's raw steel came from a non-qualifying third country. The importer owed back duties, interest, and a penalty — totaling more than the entire first year's tariff savings.

The main risks of misapplying EVFTA rules include incorrect HS code classification, failure to meet rules of origin requirements, incomplete EUR.1 documentation, and retroactive duty assessments during post-clearance audits. Any of these errors can void tariff preferences and result in financial penalties that exceed the original savings.

customs compliance risks for EVFTA stamping parts

Risk 1: HS Code Misclassification

Getting the HS code wrong is the most common and most costly mistake. Stamping parts can fall under several chapters — 73 (articles of iron or steel), 84 (machinery parts), or even 87 (automotive components). Each chapter has different tariff rates and different product-specific origin rules.

Some importers attempt what is sometimes called "HS code engineering" — classifying a multi-component stamping assembly under a more favorable heading. While legitimate reclassification is allowed, aggressive or unsupported classification changes can trigger customs scrutiny. We always recommend getting a binding tariff information (BTI) ruling 8 from the destination country's customs authority before committing to a classification.

Risk 2: Failing the Rules of Origin Test

The origin rules under EVFTA are product-specific. Most stamping parts require either:

  • A change in tariff classification (CTC) at the 4-digit heading level, or
  • A value-added content (VAC) of at least 40% calculated using a prescribed formula.

If a Vietnamese stamper imports most of its steel from China and performs only basic punching and bending, the part may not undergo sufficient transformation to qualify. The stamping process must add enough value — through forming, finishing, assembly, or use of local materials — to cross the threshold.

Our team in Vietnam verifies this before the first production run. We review the bill of materials, calculate the VAC, and confirm the tariff classification shift. This upfront work prevents problems at the port of entry.

Risk 3: Documentation Gaps

Even when a part genuinely qualifies, missing or incomplete documentation can void the preference. Common gaps include:

  • EUR.1 certificate not matching the commercial invoice details
  • Missing raw material purchase records
  • No production process documentation linking inputs to finished parts
  • Expired or incorrectly dated certificates

We maintain a document retention protocol for every EVFTA-qualifying shipment. All records are kept for at least five years, which is the standard audit window for most EU customs authorities. Learning how to ensure accurate export documents when sourcing stamping parts from Vietnam is essential to avoiding these costly gaps.

Risk 4: The Non-Alteration Rule

EVFTA includes a "non-alteration" rule. If stamping parts are transshipped through a third country — say, stored temporarily in Singapore or Hong Kong — they must remain under customs supervision 9 and not be altered or repackaged beyond what is necessary for preservation. If customs determines the goods were modified in transit, the preferential status is lost.

Since our headquarters is in Singapore, we are particularly careful about this. We ensure all transit documentation clearly shows the goods remained sealed and unaltered during any stopover.

Risk 5: Geopolitical and Regulatory Shifts

EVFTA's long-term benefits depend on continued trade agreement compliance between the EU and Vietnam. The agreement includes provisions on labor standards 10 and environmental commitments. If Vietnam fails to meet certain ILO conventions, the EU could review or suspend preferential access.

Additionally, the EU's evolving regulatory landscape — including CBAM and new supply chain due diligence requirements — may introduce costs that partially offset tariff savings for energy-intensive processes like stamping and galvanizing.

✔ Post-clearance audits can retroactively revoke EVFTA tariff preferences if documentation is incomplete True
EU customs authorities can audit imports up to five years after entry. If the importer cannot produce valid origin documentation, they must repay all preferential duty savings plus interest and potential penalties.
✘ Once a EUR.1 certificate is issued, the EVFTA tariff preference is guaranteed and cannot be challenged False
A EUR.1 certificate is a declaration, not a guarantee. Customs authorities in the importing country retain the right to verify origin claims and can reject the preference if the underlying evidence does not support qualification.

Conclusion

EVFTA offers real, measurable tariff savings on stamping parts sourced from Vietnam — but only when the HS code, origin rules, and documentation are handled correctly from the start. Understanding the full certificate of origin requirements when sourcing stamping parts from Vietnam is a critical part of that process.


Frequently Asked Questions

How does EVFTA actually lower my import duties on stamping parts from Vietnam?

A lesson we learned early while coordinating shipments from our Vietnamese partners to EU-based buyers: the tariff reduction is real, but the timeline and product classification matter more than most people expect EUR.1 Certificate of Origin 1 .

What certificate of origin do I need to qualify for EVFTA tariff benefits?

One of our clients recently shipped a batch of stamped mounting brackets to the Netherlands. The goods arrived, but customs held them for three days because the EUR.1 certificate had an error in the HS code field. That delay cost more than the tariff savings on that shipment.

Can I combine EVFTA savings with Vietnam's competitive stamping manufacturing costs?

During a recent supplier audit at a stamping facility outside Ho Chi Minh City, I watched operators run a progressive die press producing over 8,000 mounting brackets per shift. The labor cost per piece was roughly 40% lower than a comparable operation I had visited in Guangdong the month before.

Footnotes


1. Explains official EU rules of origin and proof-of-origin documentation requirements. ↩︎


2. Technical overview of the sheet metal fabrication processes used to create stamping parts. ↩︎


3. Information on the international nomenclature for the classification of products in global trade. ↩︎


4. Background on the Vietnamese government body responsible for issuing trade certificates. ↩︎


5. Official EU guidance on calculating value-added content thresholds for origin qualification. ↩︎


6. Official EU explanation of the self-certification system for exporters under trade agreements. ↩︎


7. Official EU page explaining CBAM, directly relevant to future carbon cost implications mentioned. ↩︎


8. Official procedure for obtaining a legal ruling on product classification from EU customs. ↩︎


9. Official EU definition of the status of goods under customs control during transit. ↩︎


10. Information on international labor standards referenced in the EVFTA trade agreement. ↩︎

Manufacturing RFQ

Have a STEP Model or 2D Drawing for This Project?

Share your drawing, material, quantity and finishing requirements to begin a manufacturing quote. Confirm pricing, delivery and inspection requirements during the review.

Upload CAD & Get Quote →

This article is part of DEWIN's technical manufacturing engineering knowledge base. Factory-specific details come from each factory's profile page — please verify current information there or with our team.

Quick Sourcing Inquiry