Skip to main content

🇻🇳 178 profiles · Engineering review

Vietnam Manufacturing

How to Handle HS Code Classification When Sourcing Stamping Parts from Vietnam?

July 16, 2026

Assembly line at Yue Feng Furniture Import And Export, a DEWIN-audited Vietnamese factory

Guide to handling HS code classification for Vietnam stamping parts sourcing

A misclassified HS code on a shipment of stamping parts nearly cost one of our U.S. clients three weeks of customs delays and a five-figure penalty last year.

HS code classification for stamping parts sourced from Vietnam must be based on the finished product’s material and function—not the stamping process. Steel brackets fall under Chapter 73, aluminum parts under Chapter 76, and electrical components under Chapter 85, following the General Rules of Interpretation of the Harmonized System.

Getting this right is not optional. It affects your import duty rates, customs clearance procedures, and whether you qualify for preferential treatment under agreements like EVFTA AHTN system 1. Below, I break down every step you need to take.

How do I determine the correct HS code for stamping parts made in Vietnam?

One lesson our team in Vietnam learned early on is that the word "stamping" misleads people CROSS database 2. Buyers and even some freight forwarders see "stamped metal part" on a commercial invoice and jump to HS code 8462 (stamping machines) or 820730 (stamping dies). That is wrong nearly every time.

To determine the correct HS code, identify the predominant material (steel, aluminum, copper) and the part's end-use function. Classify the finished stamping part under the corresponding material chapter—Chapter 73 for iron/steel articles, Chapter 76 for aluminum—using the WCO nomenclature and Vietnam's 8-digit AHTN system.

Determining correct HS code using material type and end-use function classification

Why "Process-Based" Classification Fails

The General Rules of Interpretation (GRI), specifically Rule 1, are clear. You classify goods by what they are, not how they were made. A steel mounting bracket is a steel article. It does not matter that a 200-ton press stamped it. If you ship a stamping die—the tool itself—that goes under 820730. If you ship the bracket that came out of that die, it goes under Chapter 73.

Our engineering team reviews every part drawing before we assign a preliminary HS code. We look at two things first: the base material and the final function. This sounds simple. But many sourcing companies skip this step and copy the supplier's code without checking.

Step-by-Step: Finding the Right Code

Here is the process we follow for every stamping part project:

  1. Identify the primary material. Check the material specification on the drawing. Is it SPCC steel? SUS304 stainless? 6061 aluminum?
  2. Determine the function. Is it a generic bracket, a specific automotive connector, or an electrical terminal?
  3. Match to the correct chapter. Use the customs tariff schedule 3 to find the chapter that covers that material.
  4. Narrow to the heading and subheading. Within the chapter, find the 4-digit heading, then the 6-digit subheading.
  5. Add the country-specific digits. Vietnam uses 8 digits. The U.S. uses 10 digits (HTS). The first 6 are the same globally.

Common HS Code Classifications for Stamping Parts

Part Type Material Likely HS Chapter Example HS Code
Mounting bracket Cold-rolled steel Chapter 73 7326.90
Electrical terminal Copper alloy Chapter 74 7419.99
Heat sink clip Aluminum Chapter 76 7616.99
Automotive body panel Steel Chapter 87 8708.29
Spring contact Stainless steel Chapter 73 7320.20

Notice that a stamping part used in a vehicle may not fall under Chapter 73 at all. It could be classified under Chapter 87 as a motor vehicle part. Function matters as much as material.

The "Essential Character" Test

When a stamping part uses multiple materials—say a steel bracket with a rubber gasket bonded to it—you apply GRI Rule 3(b). You classify it based on the material that gives it its essential character. In most cases, the metal body is the essential character. But if the rubber component is the functional element, the classification could shift.

Our quality control team documents the material composition of every part in the PPAP package 4. This documentation serves double duty: it supports the metal fabrication process records and gives customs officers exactly what they need to verify the HS code.

✔ Stamping parts must be classified by material and function, not by manufacturing process True
GRI Rule 1 requires classification based on the terms of the headings and section notes. The Harmonized System 5 does not have a chapter for “stamped goods”—parts go to their material or end-use chapter.
✘ HS code 820730 covers all stamping-related products, including finished stamped parts False
820730 only covers interchangeable tools for pressing, stamping, or punching (the dies themselves). Finished stamped parts are classified under the chapter corresponding to their material or application.
Video: Sample metal parts from audited Vietnamese factories in the DEWIN network. (@dewintech)

What documentation do I need from my Vietnamese supplier to support HS code classification?

When we onboard a new stamping supplier in Vietnam, the first thing our local team requests is a full technical dossier—not just a price quote. I have seen too many shipments get flagged at U.S. customs because the commercial invoice just said "metal parts" with no supporting detail.

You need a commercial invoice with detailed part descriptions (material, dimensions, function), a Certificate of Origin (Form D, E, or EUR.1), material mill test reports, 2D/3D CAD drawings, and a packing list that matches the HS code on every document. Consistency across all paperwork is critical.

Required supplier documentation including invoices, origin certificates and CAD drawings for classification

The Documentation Checklist

Here is what we require from every Vietnamese supplier before shipment:

Document Purpose Key Details to Include
Commercial Invoice Declares value and product identity Part number, material spec, weight, unit price, HS code
Packing List Itemizes shipment contents Quantity per carton, net/gross weight, carton dimensions
Certificate of Origin 6 (C/O) Proves "Made in Vietnam" for preferential rates Must match HS code on the invoice exactly
Material Mill Test Report (MTR) Verifies base material Steel grade, chemical composition, mechanical properties
2D/3D CAD Drawings Shows part geometry and function Material callouts, tolerances, surface finish
Bill of Lading Shipping document Accurate product description, not generic "metal goods"

Why Consistency Matters

I cannot stress this enough. If the HS code on your commercial invoice says 7326.90, but the Certificate of Origin says 7318.15, customs will flag the shipment. At best, you get a delay. At worst, you lose your preferential duty rate.

Our documentation team cross-checks every field across all documents before we release a shipment. We treat this as part of our final inspection process. A single mismatch can trigger the VNACCS/VCIS automated risk profiling system in Vietnam, which may route the shipment to the Red Channel for physical inspection. To learn more about preparing error-free paperwork, see our guide on how to ensure accurate export documents when sourcing stamping parts from Vietnam.

Proving Rules of Origin

For stamping parts to qualify as "Made in Vietnam," you need to demonstrate a Change in Tariff Classification (CTC). This means the HS code of the finished stamping part must differ from the HS code of the imported raw material (e.g., steel coil under Chapter 72 becomes a bracket under Chapter 73). This transformation must happen within Vietnam.

If your supplier imports steel coil from China, stamps it into a bracket in their factory near Ho Chi Minh City, and then exports it to the U.S., the CTC requirement is typically met. But you need paper trails: import records for the raw material, production logs, and the final export C/O. Understanding the Certificate of Origin requirements for sourcing sheet metal fabrication from Vietnam can help you navigate this process effectively.

Under the EVFTA trade agreement between Vietnam and the EU, the Rules of Origin requirements can be even stricter. If your end market is Europe, verify that the specific stamping operation qualifies under the agreement's product-specific rules.

What "Good" Descriptions Look Like

Do not let your supplier write "stamping parts" on the invoice. That tells customs nothing. Instead, push for descriptions like:

  • "Steel mounting bracket, SPCC material, zinc-plated, for industrial shelving assembly, 85mm × 42mm × 1.2mm thickness"
  • "Stainless steel spring clip, SUS301, used as cable management fastener, 32mm length"

These descriptions give customs officers enough information to verify your HS code without requesting additional documentation.

✔ HS code consistency across all trade documents is mandatory to avoid customs delays True
Mismatches between the commercial invoice, C/O, and packing list are one of the most common triggers for customs holds and rejection of preferential duty claims.
✘ A generic description like “metal parts” or “stamping parts” is sufficient on commercial invoices False
Customs authorities require specific material, dimensions, and end-use function to verify HS code accuracy. Vague descriptions almost always trigger additional scrutiny or delays.

How can I avoid customs delays or penalties caused by incorrect HS codes when importing stamping parts?

Last year, a client came to us after their previous supplier shipped a batch of aluminum clips under the wrong HS code. The shipment sat at the port of Long Beach for 18 days. The storage fees alone exceeded $4,000. That experience drove us to build a multi-layer verification system for every project we manage.

To avoid customs delays and penalties, apply for an Advance Ruling on Classification from customs authorities before the first shipment, use the CROSS database to verify precedent rulings, ensure detailed product descriptions on all documents, and partner with a licensed customs broker who understands metal fabrication imports.

Avoiding customs delays and penalties through advance rulings and broker partnerships

Pre-Shipment Verification Steps

Prevention is always cheaper than correction. Here are the steps we take before any stamping part leaves Vietnam:

1. Apply for an Advance Ruling. Both Vietnam's General Department of Customs (GDVC) and U.S. Customs and Border Protection (CBP) offer advance rulings. You submit a detailed description of your product, and they issue a binding classification decision. This eliminates guesswork.

2. Search the CROSS Database. The Customs Rulings Online Search System (CROSS) contains thousands of past classification decisions. CROSS database 7 Search for products similar to yours. If CBP already ruled that a zinc-plated steel bracket falls under 7326.90, you have strong precedent.

3. Confirm with the U.S. HTS Schedule. Use the U.S. Census Bureau's Schedule B Search Engine or the USITC HTS database 8 to verify the 10-digit code for your destination country. Remember, the first 6 digits match the international standard, but digits 7–10 are U.S.-specific.

Common Penalty Triggers

Mistake Consequence How to Prevent
Using supplier's HS code without verification Incorrect duty payment, potential penalty Independent verification by broker or internal team
Inconsistent codes across documents Shipment held for inspection Cross-check all docs before shipment
Vague product descriptions Red Channel inspection in Vietnam or CBP hold in U.S. Use detailed material + function descriptions
Misclassifying parts as tools (820730) Overpayment or underpayment of duties Apply GRI Rule 1—classify by product, not process
Ignoring CTC requirements for C/O Rejection of preferential duty rate Document the tariff shift from raw material to finished part

The Real Cost of Getting It Wrong

Customs penalties in the U.S. can range from 20% to 40% of the dutiable value for negligence. For fraud, penalties can reach four times the value of the goods. Even without penalties, a two-week delay at port means storage fees, missed production schedules for your customer, and damaged business relationships.

Our approach is to treat HS code verification as a quality gate—just like a dimensional inspection. We do not release the shipment until the code is confirmed. This is part of the customs clearance procedures we manage end-to-end for our clients. You should also be aware of what U.S. import tariffs apply when sourcing sheet metal fabrication from Vietnam, as the correct HS code directly determines your duty rate.

Monitoring 2025 Updates

Vietnam's Circular 31/2022/TT-BTC governs HS code assignments. This circular gets updated periodically to align with ASEAN Harmonized Tariff Nomenclature changes. In 2025, several subheadings for metal products have been adjusted. Our Vietnam office monitors these updates and flags any changes that affect active projects.

On the U.S. side, the HTS is also updated periodically. The 2025 edition introduced new mandates for certain metal articles. If you are not tracking these changes, you could be shipping under an obsolete code.

Should I consult a customs broker or rely on my supplier for HS code accuracy?

A purchasing manager in Texas once told me he had relied on his Vietnamese supplier's HS code for three years without question. When he finally had it audited, the code was wrong. He had been overpaying duties by 3.5% on every shipment. That is thousands of dollars left on the table.

Do not rely solely on your Vietnamese supplier for HS code accuracy. The importer is legally responsible for correct classification in the destination country. Use a licensed customs broker for independent verification, and treat the supplier's code as a starting reference point only.

Why importers should consult licensed customs brokers instead of relying on suppliers

Who Is Legally Responsible?

This is the point that surprises many buyers. Under both U.S. and Vietnamese customs law, the importer of record bears ultimate responsibility for HS code accuracy. Your supplier in Vietnam may provide a code on their commercial invoice. But if that code is wrong when the goods arrive at U.S. customs, the penalty falls on you—the importer—not the supplier.

Vietnamese customs authorities, through the Customs Department of Commodity Verification, determine the code for export purposes. But the import-side classification is a separate legal determination. The same part can have slightly different extended codes in different countries because digits 7 and beyond are country-specific.

Broker vs. Supplier: A Practical Comparison

Factor Vietnamese Supplier Licensed Customs Broker
Knowledge of destination country HTS Limited—they know Vietnam's 8-digit codes Deep—they specialize in U.S. or EU tariff schedules
Legal liability None for import-side errors Shared advisory responsibility
Awareness of trade agreements May know EVFTA or RCEP basics Can advise on preferential rates and C/O requirements
Cost Included in purchase Separate fee (typically $50–$200 per entry)
Advance Ruling support Rarely offers this service Can file on your behalf
Ongoing tariff monitoring Not their core business Part of their service scope

Our Recommendation: Use Both

We work with customs brokers 9 at both ends of the supply chain. In Vietnam, our local team coordinates with the export broker to ensure the outbound documentation is clean. In the U.S., we recommend that our clients engage their own licensed broker to independently verify the code before the shipment arrives.

This dual-layer approach catches errors early. The supplier knows the product best—the material, the process, the function. The broker knows the tariff schedule best. When both inputs align, you have a solid classification.

For complex or high-value parts, I also recommend requesting an Advance Ruling on Classification from CBP. This is a free service. It takes 30–90 days, but the ruling is legally binding. For a part you plan to import regularly, it is worth the wait.

When the Supplier's Code Is Actually Right

To be fair, many experienced Vietnamese stamping factories do classify their products correctly. Factories that export regularly to the U.S. or Europe often have in-house trade compliance staff. But even then, verify independently. The cost of a broker's review is negligible compared to the cost of a customs hold.

Our project management process includes a classification review step during the PPAP phase. By the time we reach production approval, the HS code is locked and validated. This is part of getting it right the first time—a principle that applies to trade compliance just as much as it applies to dimensional tolerances.

✔ The importer of record is legally responsible for HS code accuracy in the destination country True
Under U.S. customs law, the importer bears all liability for classification errors, regardless of what the overseas supplier declared on the commercial invoice.
✘ If the Vietnamese supplier provides an HS code, the U.S. importer can use it without further verification False
The supplier’s code is based on Vietnam’s export tariff schedule and may not account for U.S.-specific subheadings, trade remedies, or updated HTS classifications. Independent verification is essential.

Conclusion

Correct HS code classification for stamping parts from Vietnam depends on material and function—never the stamping process. Verify codes independently, maintain consistent documentation, and partner with a qualified customs broker to protect your bottom line.

Frequently Asked Questions

Who Is Legally Responsible?

This is the point that surprises many buyers. Under both U.S. and Vietnamese customs law, the importer of record bears ultimate responsibility for HS code accuracy. Your supplier in Vietnam may provide a code on their commercial invoice. But if that code is wrong when the goods arrive at U.S. customs, the penalty falls on you—the importer—not the supplier.

How do I determine the correct HS code for stamping parts made in Vietnam?

One lesson our team in Vietnam learned early on is that the word "stamping" misleads people CROSS database 2 . Buyers and even some freight forwarders see "stamped metal part" on a commercial invoice and jump to HS code 8462 (stamping machines) or 820730 (stamping dies). That is wrong nearly every time.

What documentation do I need from my Vietnamese supplier to support HS code classification?

When we onboard a new stamping supplier in Vietnam, the first thing our local team requests is a full technical dossier—not just a price quote. I have seen too many shipments get flagged at U.S. customs because the commercial invoice just said "metal parts" with no supporting detail.

Footnotes


1. Official ASEAN source explaining the 8-digit tariff nomenclature used by Vietnam. ↩︎


2. Links directly to the official CBP rulings search tool mentioned in the text. ↩︎


3. The organized list of codes used to classify traded products for duty purposes. ↩︎


4. Standardized process in the automotive and manufacturing industries for product quality. ↩︎


5. Provides background on the international HS nomenclature referenced throughout the article. ↩︎


6. International trade document attesting that goods in a shipment are wholly obtained or produced. ↩︎


7. Searchable database of official U.S. Customs and Border Protection ruling letters. ↩︎


8. Official resource for determining United States tariff classifications and duty rates. ↩︎


9. Professionals who assist importers and exporters in meeting federal requirements. ↩︎

Manufacturing RFQ

Have a STEP Model or 2D Drawing for This Project?

Share your drawing, material, quantity and finishing requirements to begin a manufacturing quote. Confirm pricing, delivery and inspection requirements during the review.

Upload CAD & Get Quote →

This article is part of DEWIN's technical manufacturing engineering knowledge base. Factory-specific details come from each factory's profile page — please verify current information there or with our team.

Quick Sourcing Inquiry