Last quarter, a buyer in Ohio asked me to re-quote his entire stamping bracket family — the Section 301 tariffs 1 on his Chinese supplier had pushed his total landed cost up by 25%, and he needed answers fast.
Section 301 tariffs currently add 25% to over 145% on Chinese-origin stamping parts, while Vietnamese-origin stamping parts face zero legacy Section 301 duties. This gap can save U.S. importers hundreds of thousands of dollars annually, but new proposed investigations in 2026 may introduce additional duties on Vietnam that buyers must monitor closely.
The math sounds simple — move production, skip the tariff, save money. But the real picture is more layered than that. Below, I break down the actual cost shifts, compliance traps, documentation needs, and the true landed cost calculation our team walks through with every client considering this move.
How Much Have My Stamping Parts Costs Changed Since Section 301 Tariffs Took Effect?
One conversation sticks with me. A purchasing manager we work with had been paying $8.50 per piece for a zinc-plated mounting bracket from Dongguan. After the List 3 tariffs hit, his customs broker called with a new landed number that made him reconsider his entire sourcing strategy.
Since Section 301 tariffs took effect, stamping parts sourced from China have seen landed cost increases of 25% to over 145%, depending on their Harmonized Tariff Schedule classification. Vietnamese-origin stamping parts currently carry zero Section 301 duties, creating a significant and immediate cost differential for U.S. importers.

The Legacy Tariff Ranges on Chinese Stamping Parts
The impact depends on which List your parts fall under. Here is a simplified breakdown of the Section 301 tariff layers that apply to typical stamped metal components:
| Tariff List | Effective Date | Duty Rate | Typical Stamping Parts Affected |
|---|---|---|---|
| List 1 | July 2018 | 25% | Industrial machinery brackets, structural mounts |
| List 3 | September 2018 | 25% | Sheet metal stampings, precision clips, hardware |
| List 4A | September 2019 | 7.5%–25% | Consumer electronics mounting brackets |
| Additional Escalations | 2024–2025 | Up to 145% | Select categories under further executive action |
These rates stack on top of existing Most Favored Nation 2 (MFN) duties. A stamped steel bracket classified under a specific HTS code might carry a base MFN duty of 2.9%, plus 25% Section 301, bringing the total duty burden to nearly 28%. For higher-escalation categories, the numbers get even more painful.
What This Means in Dollar Terms
Let me put it concretely. Our team recently helped a client transition a family of CNC-stamped mounting clips — the kind with folded flanges and precision-punched slotted holes. His annual spend was roughly $400,000 at the China base price.
- China scenario: $400K base + 25% tariff = $500K landed (before freight and handling)
- Vietnam scenario: $440K base (10% higher production cost) + 0% tariff = $440K landed
That is a $60,000 annual saving, even though the Vietnamese factory charged more per piece. When the tariff rate on China climbs above 25%, the savings widen dramatically.
The Hidden Escalation Risk
Here is something many buyers miss. The trade war mitigation landscape is shifting again. In June 2026, USTR proposed a new 12.5% duty on Vietnam linked to a forced labor investigation. A separate excess capacity investigation could layer on an additional 10%. If both proceed, the combined exposure for affected categories could reach 32.5%.
The critical question is whether stamping parts fall under the targeted sectors. The proposals focus heavily on textiles, footwear, wood products, and electronics. Sheet metal stamping brackets — the kind we produce for automotive and industrial applications — are more likely classified as industrial inputs. But "likely" is not "definitely." Every buyer should verify their specific HTS code now, not after the final rule drops.
Can I Avoid Section 301 Tariffs by Sourcing Stamping Parts From Vietnam Instead of China?
A lesson I learned early in this business: the word "avoid" makes customs attorneys nervous. When clients ask me whether Vietnam eliminates Section 301 exposure, my answer is always "it depends on what you actually mean."
Yes, you can eliminate legacy Section 301 tariffs by sourcing stamping parts manufactured in Vietnam, since these duties apply only to Chinese-origin goods. However, the parts must undergo substantial transformation in Vietnam, and Chinese raw materials used in production may trigger separate anti-dumping or countervailing duties that can exceed Section 301 rates.

The Substantial Transformation Test
Simply shipping Chinese-made stamping blanks to Vietnam for minor finishing does not change the country of origin 3. Customs and Border Protection applies the "substantial transformation 4" standard. The product must be transformed into a new and different article of commerce with a new name, character, and use.
For stamping parts, this generally means:
- Raw material sourcing: The steel coil or aluminum sheet should ideally be melted and poured outside China.
- Die cutting and stamping: The actual forming, bending, and punching must occur in Vietnam.
- Secondary processing: Heat treatment, plating, and precision grinding performed in Vietnam strengthen the origin claim.
If you send pre-cut Chinese blanks to Vietnam for a single bend and a zinc coating, CBP may rule that no substantial transformation occurred. The part is still Chinese-origin, and the full Section 301 tariff applies.
The China Plus One Strategy in Practice
Many of our clients adopt a China Plus One strategy 5 — maintaining a Chinese supply base for domestic or non-U.S. markets while establishing a parallel Vietnam source for U.S.-bound shipments. This approach works well for supply chain diversification, but it introduces complexity.
Here is how the cost comparison typically plays out for a standard stamped mounting bracket:
| Cost Factor | China (with Section 301) | Vietnam (no Section 301) |
|---|---|---|
| Base unit price | $10.00 | $13.00 |
| MFN duty (2.9%) | $0.29 | $0.38 |
| Section 301 duty (25%) | $2.50 | $0.00 |
| Ocean freight per unit | $0.40 | $0.55 |
| Customs brokerage per unit | $0.15 | $0.15 |
| Total landed cost | $13.34 | $14.08 |
In this scenario, Vietnam is slightly more expensive. But increase the Section 301 rate to 50% or higher — which applies to many HTS codes now — and the math flips completely.
The Anti-Circumvention Trap
U.S. Customs has intensified anti-circumvention investigations 6 targeting goods routed through Vietnam to mask Chinese origin. The metal fabrication industry has seen several high-profile EAPA (Enforce and Protect Act) 7 cases where importers faced penalties for transshipment schemes.
Our Vietnam office conducts factory audits specifically to document that stamping operations genuinely occur in-country. We photograph die setups, verify coil source certificates, and maintain production logs. This is not optional — it is essential for any importer who wants to defend their country of origin rules classification under CBP scrutiny.
The AD/CVD Wild Card
Even when Vietnam origin is legitimate, there is another risk. If the steel substrate used in Vietnamese stamping was originally produced in China, it may trigger anti-dumping and countervailing duties 8 (AD/CVD) on the steel content. In some cases, AD/CVD rates on Chinese steel exceed 200%. This is duty stacking at its worst.
The trend is moving toward "melted and poured" certification requirements. U.S. trade policy increasingly tracks the origin of the raw steel coil, not just the location of the press. Importers should request mill certificates showing where the steel was melted, poured, and rolled.
What Documentation Do I Need to Prove Vietnam Origin for My Stamping Parts?
During a recent CBP review of one of our shipments, the examining officer asked for seven separate documents to verify origin. Our client was prepared because we had built the compliance file months before the first container shipped. Not every importer is that fortunate.
To prove Vietnam origin for stamping parts, you need mill test certificates showing steel origin (ideally with "melted and poured" data), Vietnam factory production records, commercial invoices from the Vietnamese manufacturer, a bill of materials tracing all inputs, certificates of origin issued by Vietnamese chambers of commerce, and photographic or video evidence of the stamping process performed in Vietnam.
/ICHI-%20Photo/150-ton%20Stamping%20Press%20Machine%201.jpg)
The Documentation Checklist
I have organized the essential documents into a table based on what CBP examiners and customs brokers typically request:
| Document | Purpose | Who Provides It |
|---|---|---|
| Mill Test Certificate (MTC) | Proves where steel was melted, poured, and rolled | Steel mill or coil supplier |
| Certificate of Origin 9 (CO) | Officially certifies Vietnamese manufacture | Vietnamese Chamber of Commerce |
| Commercial Invoice | Shows transaction between importer and Vietnamese seller | Vietnamese manufacturer |
| Bill of Materials (BOM) | Lists all inputs and their countries of origin | Manufacturer / sourcing agent |
| Production Records | Stamping press logs, die setup sheets, QC inspection reports | Vietnamese factory |
| Packing List with Lot Traceability | Links finished parts to specific production batches | Vietnamese factory |
| Photos / Videos of Production | Visual evidence of stamping, bending, plating in Vietnam | Factory audit team or sourcing agent |
| Shipping Documents (B/L, AWB) | Confirms goods shipped directly from Vietnam port | Freight forwarder |
Why "Melted and Poured" Matters Now
The Harmonized Tariff Schedule 10 classification determines duty rates, but origin verification goes deeper. CBP is increasingly focused on where the raw metal was melted and poured — not just where it was stamped.
Our team in Vietnam works directly with local steel distributors who source coil from POSCO Vietnam, Formosa Ha Tinh, and other mills with verified non-Chinese melt origins. We request MTCs that explicitly state the melt country. This single document can make or break an origin claim.
Building a Defensible Compliance File
I tell every new client the same thing: build your compliance file before you ship, not after CBP asks questions. Here is the process our team follows:
- Pre-qualification audit: We visit the Vietnamese factory and verify it has real stamping presses, real dies, and real production capability.
- Input mapping: We trace every material input — steel coil, zinc plating chemicals, packaging — to its country of origin.
- Production documentation: We collect stamping press run logs, first-article inspection reports, and in-process QC records for each production order.
- Origin certification: We coordinate with the local chamber of commerce to issue a formal Certificate of Origin.
- Archive: We maintain a digital archive of all documents for a minimum of five years, matching CBP's record-keeping requirements.
This level of documentation is not just "nice to have." With anti-circumvention investigations on the rise and CBP deploying more resources to target transshipment in the metal fabrication industry, a thin compliance file is a liability. For a broader look at the US import regulations and tariffs that apply when sourcing stamping parts from Vietnam, we have published a detailed companion guide.
How Do I Calculate the True Landed Cost of Vietnamese Stamping Parts After Tariffs?
A buyer I work with once told me he switched to Vietnam expecting a 25% savings, then discovered his actual savings were closer to 8%. The gap? He forgot to account for tooling amortization, longer lead times, and the inventory carrying cost of a 45-day ocean transit versus 21 days from China.
To calculate the true landed cost of Vietnamese stamping parts, add the base unit price, applicable MFN duties, any AD/CVD exposure on raw materials, ocean freight, insurance, customs brokerage fees, tooling amortization per unit, quality inspection costs, and inventory carrying costs from extended lead times — then compare this total against your current China landed cost including all Section 301 tariffs.

The Full Landed Cost Framework
Most buyers compare unit price plus tariff. That is incomplete. Here is the framework I walk through with every client:
| Cost Element | China (with 25% 301) | Vietnam (0% 301) | Notes |
|---|---|---|---|
| Base unit price | $10.00 | $13.00 | Vietnam 30% higher for this example |
| MFN duty | $0.29 (2.9%) | $0.38 (2.9%) | Applied to declared value |
| Section 301 duty | $2.50 (25%) | $0.00 | Zero for Vietnam-origin |
| AD/CVD on steel content | $0.00 | $0.00–$2.00 | Risk if Chinese-origin steel used |
| Ocean freight | $0.40 | $0.55 | Vietnam ports less efficient |
| Insurance | $0.05 | $0.05 | Similar rates |
| Customs brokerage | $0.15 | $0.15 | Similar rates |
| Tooling amortization | $0.10 | $0.25 | New tooling required for Vietnam |
| Quality inspection | $0.08 | $0.12 | More oversight needed initially |
| Inventory carrying cost | $0.10 | $0.18 | Longer lead times = more buffer stock |
| Total landed cost | $13.67 | $14.68 | Vietnam is $1.01 more in this scenario |
When Vietnam Wins — and When It Doesn't
At 25% Section 301, Vietnam may not always win on a per-unit basis, especially for mature parts with optimized Chinese supply chains. But there are clear tipping points.
Volume threshold: Our experience shows that switching costs — new tooling, qualification runs, first-article inspections — typically add $15,000 to $40,000 upfront. For annual spend below $50,000, those costs take too long to amortize. Above $100,000 annual spend, the payback period shrinks to under 12 months in most cases.
Tariff rate threshold: When the Section 301 rate on China exceeds 35%, Vietnam almost always wins on total landed cost, even with 30–40% higher base production costs. At 50% or above, the savings become dramatic.
Reducing the Base Cost Gap
There are practical ways to close the gap between Chinese and Vietnamese base prices for stamping parts:
- Tolerance optimization: Relaxing non-critical tolerances from ±0.01mm to ±0.05mm can reduce machining and inspection time by 20–30%. Our engineering team reviews every drawing before quoting to flag these opportunities.
- Material substitution: Using locally available Vietnamese steel grades instead of importing specific Chinese grades can cut material costs by 10–15%.
- Design for Vietnam manufacturing: Some features that are easy to produce on Chinese high-speed progressive dies may require simpler tooling approaches in Vietnam. Adjusting the design early saves money downstream.
The 2026 Tariff Cliff — What to Watch
The proposed 12.5% forced labor duty on Vietnam is not yet final. But prudent buyers should model scenarios now. If the duty applies to your stamping parts' HTS classification, your total landed cost from Vietnam increases by 12.5%. At that point, you need to recalculate.
Our recommendation: pull your top 20 spend items by HTS code, apply the proposed 12.5% rate, and compare against your current China landed cost. If Vietnam still wins, proceed with confidence. If the margin is thin, consider dual-qualifying suppliers in Taiwan or India as a hedge for further supply chain diversification. Buyers sourcing sheet metal fabrication from Vietnam should also understand the full range of US import tariffs that may apply to their broader metal component programs.
Conclusion
Section 301 tariffs have reshaped stamping part sourcing. Vietnam offers real savings — but only when you verify origin, map your steel inputs, calculate true landed cost, and stay ahead of the 2026 proposed duties. Reach out to our team at sa***@*******ch.com to start your landed cost analysis today.
Frequently Asked Questions
How Much Have My Stamping Parts Costs Changed Since Section 301 Tariffs Took Effect?
One conversation sticks with me. A purchasing manager we work with had been paying $8.50 per piece for a zinc-plated mounting bracket from Dongguan. After the List 3 tariffs hit, his customs broker called with a new landed number that made him reconsider his entire sourcing strategy.
Can I Avoid Section 301 Tariffs by Sourcing Stamping Parts From Vietnam Instead of China?
A lesson I learned early in this business: the word "avoid" makes customs attorneys nervous. When clients ask me whether Vietnam eliminates Section 301 exposure, my answer is always "it depends on what you actually mean."
What Documentation Do I Need to Prove Vietnam Origin for My Stamping Parts?
During a recent CBP review of one of our shipments, the examining officer asked for seven separate documents to verify origin. Our client was prepared because we had built the compliance file months before the first container shipped. Not every importer is that fortunate.
Footnotes
1. Official USTR page explaining Section 301 tariff investigations and legal basis. ↩︎
2. WTO’s official explanation of the Most Favored Nation trade principle. ↩︎
3. WTO overview of rules of origin governing international customs classification. ↩︎
4. CBP page defining the substantial transformation standard for country of origin. ↩︎
5. Background on the China Plus One supply chain diversification strategy discussed. ↩︎
6. USTR page on Vietnam trade relations relevant to circumvention enforcement concerns. ↩︎
7. CBP’s official EAPA program page covering transshipment enforcement cases. ↩︎
8. US Dept of Commerce explains AD/CVD duty mechanisms referenced for steel content. ↩︎
9. Background explanation of certificates of origin used in international trade documentation. ↩︎
10. USITC official HTS lookup tool for determining applicable duty classifications. ↩︎
