Last quarter, a long-time U.S. buyer asked our team to re-quote an entire bracket family — the same parts we’d been helping source from China for three years — because the landed cost had become unbearable.
Section 301 tariffs currently give Vietnam-sourced stamping parts a zero-tariff advantage over China, where rates run 25% to 145%. However, a new 2026 USTR investigation proposes a 12.5% additional tariff on Vietnamese imports, potentially raising combined exposure to 32.5% for certain categories and narrowing the cost gap significantly.
The tariff landscape is shifting fast. This article breaks down the current math, the emerging risks, and the practical steps you should take before committing tooling dollars to a new country rules of origin 1. Let’s walk through it section by section.
Are My Stamping Parts from Vietnam Still Subject to Section 301 Tariffs?
A buyer in the Midwest emailed us in early 2026 with a simple question: "If I move my stamping parts to Vietnam, do I still pay Section 301 duties?" The answer was easy then. It is more complicated now.
As of mid-2026, stamping parts manufactured in Vietnam and meeting country of origin rules enter the U.S. at 0% Section 301 tariff — a stark contrast to the 25%–145% rates applied to identical parts from China. But a newly proposed 12.5% tariff on Vietnamese goods could change this advantage within months.

The Current Zero-Tariff Window
Right now, precision metal components 2 stamped in Vietnam are not covered by the original Section 301 lists targeting China. That means an L-bracket, a post base mount, or a powder-coated structural bracket — all the types of parts we help U.S. clients source — ships into the U.S. without the additional 25%–145% tariff layer that applies to Chinese-origin goods intellectual property protection 3.
This zero-tariff status is why the China Plus One strategy 4 exploded in popularity. Companies moved stamping, CNC machining, and die casting work to Southeast Asia manufacturing hubs specifically to escape these costs.
What Changed in May 2026
On May 29, 2026, the USTR initiated a new Section 301 investigation 5 on Vietnam. It covers three areas: intellectual property protection, forced labor enforcement, and structural excess manufacturing capacity. The investigation proposes a 12.5% ad valorem tariff on a range of Vietnamese imports.
Here is where it gets tricky for stamping buyers. The proposed tariffs target electronics, components, textiles, footwear, and wood products. Metal fabrication services and stamped hardware may or may not fall within the final scope, depending on HTS code classification.
Tariff Comparison: China vs. Vietnam (Current and Proposed)
| Factor | China (Section 301) | Vietnam (Current) | Vietnam (Proposed 2026) |
|---|---|---|---|
| Section 301 Tariff Rate | 25% – 145% | 0% | 12.5% (proposed) |
| Combined Tariff Exposure | Up to 145%+ | 0% | Up to 32.5% |
| Status | Active and enforced | Active, no additional tariff | Under investigation, not final |
| Affected Product Scope | Broad (most manufactured goods) | N/A | Electronics, components, textiles, others TBD |
The key takeaway: your stamping parts from Vietnam are still tariff-free today. But the USTR exclusion process is ongoing, and the final scope may expand. Smart importers are watching this closely and preparing contingency plans.
Why the USTR Shifted to Section 301
There is a legal backdrop worth understanding. The U.S. Supreme Court recently struck down certain IEEPA-based tariffs. In response, the USTR is leaning on Section 301 as a durable, legally tested tool for unilateral trade enforcement. This signals that aggressive trade compliance measures are here to stay — for China, for Vietnam, and potentially for other Southeast Asian suppliers.
How Much Can I Really Save by Shifting My Stamping Parts Sourcing from China to Vietnam?
When we ran side-by-side landed cost models for a U.S. distributor last year — same HSLA steel bracket, same annual volume, same packaging spec — the numbers were hard to ignore.
Shifting stamping parts from China to Vietnam can save 28%–38% on fully loaded landed costs today, driven entirely by the tariff differential. For a part family costing $13 per unit from Vietnam at 0% tariff versus a comparable China price at 25%+ tariff, annual savings reach $225,000–$275,000 on moderate volumes.
/ICHI-%20Photo/150-ton%20Stamping%20Press%20Machine%201.jpg)
Breaking Down the Landed Cost Delta
The savings are not just about the tariff rate on paper. Landed cost includes unit price, tooling amortization, freight, customs duties, insurance, and handling. Here is how the math works for a real bracket example.
| Cost Component | China Source | Vietnam Source | Difference |
|---|---|---|---|
| Unit Price (FOB) | $11.50 | $13.00 | +$1.50 (Vietnam higher) |
| Section 301 Tariff (25%) | $2.88 | $0.00 | -$2.88 |
| Ocean Freight (per unit) | $0.80 | $0.95 | +$0.15 |
| Customs Brokerage & Handling | $0.30 | $0.30 | $0.00 |
| Total Landed Cost | $15.48 | $14.25 | -$1.23 per unit |
At 10,000 pieces per year, that $1.23 delta equals $12,300 in savings — on a single part number. Scale that across a family of five or ten similar brackets, and you quickly reach the $225,000–$275,000 range.
For companies sourcing $200,000 per year in sheet metal from China, the tariff cost alone exceeds $50,000 annually. That money goes straight to import duties and taxes, not to product improvement or margin.
Volume Thresholds That Matter
Not every part makes sense to move. Our team in Vietnam has learned that switching costs — new tooling, first-article inspections, qualification runs — may not pay off for annual volumes under $50,000. The economics become compelling above $100,000 in annual spend, where first-year savings cover tooling and qualification expenses.
The 2026 Risk Factor
Here is the tension. If the proposed 12.5% tariff on Vietnamese imports becomes final, and if stamping parts fall within the affected HTS categories, the landed cost delta shrinks. A 12.5% tariff on a $13 unit adds $1.63. Combined with existing rates, the total exposure could hit 32.5%. At that level, the cost advantage over China’s lower tiers (25% Section 301) nearly evaporates.
This is the core dilemma for supply chain diversification planning right now: lock in savings today, or wait for regulatory clarity.
When to Move Now vs. When to Wait
Consider moving now if:
- Your annual spend on targeted parts exceeds $100,000.
- Your parts currently face the 25%+ tier of Section 301 on China.
- Your designs are mature and stable (no major revision expected).
- You have the bandwidth for a 90–120 day qualification process.
Consider waiting if:
- Your volumes are below $50,000 per year.
- Your parts involve complex multi-stage assemblies with embedded electronics (a sector directly targeted by the 2026 investigation).
- You cannot absorb the risk of re-tooling if tariffs shift again.
How Do I Prove Country of Origin to Avoid Transshipment Risks When Sourcing from Vietnam?
One lesson we learned early in our Vietnam operations: getting the price right means nothing if Customs and Border Protection reclassifies your parts as Chinese-origin at the port. That scenario turns a cost-saving project into a compliance nightmare.
To prove Vietnam origin and avoid transshipment accusations, stamping parts must undergo "substantial transformation" in Vietnam — a fundamental change in form, character, or use. Importers need documented evidence including raw material mill certificates, in-process production records, tooling ownership proof, and HTS classification analysis showing the essential character was established in Vietnam.

The Substantial Transformation Test
U.S. country of origin rules rely on the "substantial transformation" standard. This means the manufacturing process in Vietnam must change the article into a new and different product with a distinct name, character, or use. For stamping parts, this typically means:
- Raw steel coil or sheet is cut, formed, stamped, and finished into a bracket, mount, or structural component.
- The finished part has a fundamentally different form and function than the input material.
- Secondary processes like welding, heat treatment, plating, or powder coating add further transformation.
A single stamping hit on a pre-formed Chinese blank may not qualify. Customs and Border Protection is increasingly applying scrutiny to "single-hit" processing.
The "Melt and Pour" Standard
Here is a critical nuance many importers miss. CBP now applies a "Melt and Pour" standard to stamped components. If the raw steel coil originated in China, the finished part may still be classified as Chinese-origin — regardless of the stamping work performed in Vietnam. This is the hidden side of trade compliance.
Our approach: we work with suppliers who source steel coil from non-China origins (Japan, Korea, Taiwan, India) or who can demonstrate that the Vietnamese processing is so extensive that it independently satisfies substantial transformation.
Tooling Ownership: A Growing Red Flag
The ownership and origin of stamping dies are becoming audit triggers. If dies are "free-issued" from a Chinese facility to a Vietnamese shop without significant modification, U.S. authorities may argue that the "essential character" of the part was established in China. The tooling effectively defined the product; Vietnam merely pressed a button.
To mitigate this, we recommend that tooling be either:
- Manufactured in Vietnam from the start.
- Significantly modified or rebuilt in Vietnam with documented engineering changes.
- Owned by the importer or the Vietnamese supplier, not by the Chinese entity.
The RCEP Compliance Gap
There is a growing compliance gap between RCEP origin rules 6 used within Asia and U.S. Section 301 rules. A part can legally be "Made in Vietnam" for regional trade under RCEP — but still be classified as "Made in China" for U.S. tariff purposes. This catches many buyers off guard.
| Origin Rule | RCEP Standard | U.S. Section 301 Standard |
|---|---|---|
| Test Applied | Regional value content or tariff shift | Substantial transformation |
| Steel Coil from China | Acceptable if value-add threshold met | May trigger "Melt and Pour" reclassification |
| Free-issued Chinese tooling | Generally acceptable | Red flag for circumvention audit |
| Single stamping operation | May qualify | Unlikely to qualify alone |
| Multi-stage fabrication + finishing | Qualifies | Strongly qualifies |
Building a Defensible Paper Trail
Our team in Vietnam helps clients assemble documentation packages that include:
- Mill test certificates for raw materials showing non-China origin.
- Photographs and timestamps of each production stage.
- Tooling ownership records and modification logs.
- Quality inspection reports from each process step.
- Commercial invoices and packing lists tracing the full supply chain.
This paper trail is your defense if CBP initiates a circumvention audit. Without it, you are exposed — even if the work genuinely happened in Vietnam.
What Should I Look for in a Vietnam Stamping Supplier to Ensure Quality and Compliance?
During a supplier audit in Ho Chi Minh City last year, we visited a shop that quoted aggressively on progressive die stamping 7 — then showed us dies imported from Dongguan with no modification records. That visit taught us exactly what to screen for.
When evaluating a Vietnam stamping supplier, prioritize five areas: demonstrated progressive die stamping capability, locally sourced or non-China raw materials with traceable mill certificates, documented quality control systems with PPAP capability, tooling ownership transparency, and verifiable export history to the U.S. market to confirm trade compliance experience.

Process Suitability: What Vietnam Does Well
Vietnam's metal fabrication services sector has matured rapidly. Suppliers are increasingly absorbing progressive die stamping 8, CNC machining, sheet metal fabrication, and die casting — processes that were China-dominant five years ago. For standard structural brackets, mounting hardware, post bases, and similar stamping parts, Vietnamese factories now deliver production-grade quality.
However, Vietnam is less developed for complex multi-stage assemblies with embedded electronics. If your part is a simple to moderately complex stamped bracket with welding and finishing, Vietnam is a strong fit. If it requires integrated PCB assembly or micro-tolerance sensor housings, the supply base is thinner.
The Supplier Evaluation Checklist
Here is the framework we use when qualifying a new stamping supplier in Vietnam for U.S.-bound parts:
| Evaluation Criteria | What to Verify | Red Flag |
|---|---|---|
| Stamping Capability | Progressive die, transfer die, or single-hit | Only single-hit with no secondary processes |
| Raw Material Sourcing | Mill certificates from Japan, Korea, Taiwan, or domestic | All coil sourced from China with no transformation documentation |
| Quality System | ISO 9001 certified, PPAP capability, in-process inspection | No formal QC system, no measurement equipment calibration records |
| Tooling Ownership | Supplier-owned or buyer-owned dies, manufactured or modified locally | Free-issued Chinese tooling with no modification records |
| Export Experience | Prior shipments to U.S. customers, familiarity with HTS code classification | No U.S. export history, unfamiliar with CBP documentation requirements |
| Capacity & Lead Time | Adequate press tonnage, realistic lead time commitments | Over-promising delivery dates with no production planning evidence |
Duty Stacking: The Hidden Cost Trap
One risk that even experienced purchasing managers overlook is duty stacking. This happens when Vietnamese-manufactured stamping parts incorporate Chinese sub-assemblies or raw materials that independently trigger duties.
For example, if your bracket uses a Chinese-origin steel coil, it may face Section 232 steel tariffs 9 (25%) on the raw material value, plus any applicable Section 301 duties if the origin determination fails. The Section 232 duty on the steel is separate from Section 301 — and it applies regardless of where the stamping happens.
Our recommendation: request a full bill of materials 10 from your supplier, including the origin of every sub-component and raw material. Then have your customs broker review the HTS classification for each element. A CNC machined part might be classified as raw metal (lower duty) or a finished component (higher duty), and that classification drastically changes the math.
RFQ Preparation for Vietnam Sourcing
To get accurate and compliant quotes from Vietnamese stamping suppliers, your RFQ package should include:
- 3D CAD files (STEP or IGES format) for each part.
- 2D drawings with GD&T callouts, material specifications, and finish requirements.
- Annual volume forecast — be realistic; inflated volumes lead to misleading quotes.
- Material specification including acceptable origins (e.g., "HSLA steel, non-China origin preferred").
- Quality requirements — PPAP level, inspection criteria, acceptable defect rates.
- Packaging and shipping requirements — export packaging, labeling, Incoterms.
The more complete your RFQ, the fewer surprises during production. This is where working with a sourcing partner that has a local team in Vietnam adds real value. Our seven-person Vietnam office handles supplier audits, contract manufacturing coordination, process control, and final inspection — all aimed at getting it right the first time.
A Note on Payment Terms and Cash Flow
Many Vietnam suppliers require 30% deposit with T/T payment. This creates cash flow pressure for U.S. importers already dealing with tariff uncertainty. At DEWIN, we offer open account payment terms (60–90 days) to qualified clients, which alleviates this burden and aligns payment timing with your receivables cycle.
Conclusion
Section 301 tariffs on stamping parts create a clear but time-sensitive opportunity to source from Vietnam. Act now by auditing your supply chain, verifying country of origin compliance, and selecting suppliers with proven quality and trade compliance capabilities.
Frequently Asked Questions
Are My Stamping Parts from Vietnam Still Subject to Section 301 Tariffs?
A buyer in the Midwest emailed us in early 2026 with a simple question: "If I move my stamping parts to Vietnam, do I still pay Section 301 duties?" The answer was easy then. It is more complicated now.
How Much Can I Really Save by Shifting My Stamping Parts Sourcing from China to Vietnam?
When we ran side-by-side landed cost models for a U.S. distributor last year — same HSLA steel bracket, same annual volume, same packaging spec — the numbers were hard to ignore.
How Do I Prove Country of Origin to Avoid Transshipment Risks When Sourcing from Vietnam?
One lesson we learned early in our Vietnam operations: getting the price right means nothing if Customs and Border Protection reclassifies your parts as Chinese-origin at the port. That scenario turns a cost-saving project into a compliance nightmare.
Footnotes
1. Provides background on the legal framework behind the substantial transformation standard discussed. ↩︎
2. Official U.S. government guide providing an overview of the Vietnamese market for industrial components. ↩︎
3. WIPO’s overview of intellectual property rights, relevant to the USTR investigation scope. ↩︎
4. Wikipedia entry defining the business strategy of diversifying manufacturing beyond China. ↩︎
5. Official USTR page explaining the nature and process of Section 301 trade investigations. ↩︎
6. Official portal for the Regional Comprehensive Economic Partnership, detailing its trade and origin standards. ↩︎
7. Explains the metal stamping process referenced as a core Vietnamese manufacturing capability. ↩︎
8. Technical explanation of the metalworking process mentioned as a key supplier capability. ↩︎
9. Department of Commerce page explaining tariffs on steel and aluminum imports based on national security. ↩︎
10. Definition of the comprehensive list of raw materials and components needed for manufacturing. ↩︎
