Skip to main content

🇻🇳 178 profiles · Engineering review

Vietnam Manufacturing

How to Understand Common Material Grades of Stamping Parts as an OEM Buyer?

July 17, 2026

Assembly line at Nhat Quang Phat Company Limited (Q-Furniture), a DEWIN-audited Vietnamese factory

Guide to understanding common material grades for OEM stamping part buyers

Last quarter, a U.S. buyer sent us a drawing that specified “SPCC” steel — but their engineer kept referencing “DC01.” Our team in Vietnam had to pause production to confirm they were talking about the same material ASTM and ISO standards 1. This kind of naming confusion around common material grades of stamping parts costs OEM buyers weeks of delay, rework, and money.

Common material grades of stamping parts include mild steels (SPCC, DC01, AISI 1010), high-strength steels (DP600, 22MnB5), stainless steels (304, 316, 430), aluminum alloys (5052-H32, 6061-T6), and copper/brass grades. OEM buyers must match each grade’s tensile and yield strength, formability, and corrosion resistance to their part’s real-world application requirements.

This guide breaks down the most common grades, compares global naming standards, and gives you a practical framework to avoid costly specification mistakes EN 10130 2. Let’s walk through it section by section.

How Do I Match Material Grades to My Stamping Part's Application Requirements?

A purchasing manager we work with in the Midwest once ordered 10,000 brackets in 304 stainless steel for an indoor electrical enclosure. The parts worked perfectly — but he overpaid by nearly 30% because cold rolled steel like DC01 would have met every requirement at a fraction of the cost.

To match material grades to your stamping part's application, evaluate four factors: required tensile and yield strength for structural load, formability for complex shapes, corrosion resistance for the operating environment, and weight constraints. Then select the lowest-cost grade that satisfies all four criteria without over-specifying.

Matching material grades to stamping part strength, formability, and corrosion needs

Start with the Four-Pillar Framework

Before you open a material catalog, answer these four questions about your part:

  1. How much load does it carry? A structural automotive bracket needs 400+ MPa tensile strength. A decorative cover might only need 270 MPa.
  2. How complex is the shape? Deep drawing quality 3 matters. Parts with tight radii or deep draws need high formability — materials with a high plastic strain ratio (r-value) and strain hardening exponent (n-value).
  3. Where does it live? Outdoor, underbody, or marine environments demand galvanized or stainless grades. Indoor applications rarely do.
  4. Does weight matter? If you are designing for EVs or portable equipment, aluminum alloys like 5052-H32 save roughly 33% weight compared to steel.

The Material Selection Matrix

Here is a practical decision table our sourcing team uses when advising clients:

Application Need Recommended Material Common Grades Tensile Strength Range Relative Cost
High formability, non-structural Mild / Low-Carbon Steel SPCC, DC01, AISI 1010 270–370 MPa Low
Structural load, crash safety High-Strength Steel (HSS/AHSS) DP600, DP800, TRIP 780 400–800 MPa Medium
Maximum crash resistance Ultra-High-Strength Steel 22MnB5 (Press-Hardened) 1,200–1,800 MPa High
Corrosion resistance (outdoor) Galvanized Steel SGCC, DX51D+Z (G60/G90) 270–400 MPa Low–Medium
Corrosion resistance (harsh) Stainless Steel 304, 316, 430 500–700 MPa High
Lightweight structural Aluminum Alloy 5052-H32, 6061-T6 170–310 MPa Medium–High
Electrical conductivity Copper / Brass C1100, C260 (H62/H65) 200–350 MPa High

Think in Tiers, Not Individual Grades

I find it helpful to group steel into three tiers by strength. Tier 1 covers mild steels below 370 MPa — your floor pans, brackets, and enclosures. Tier 2 includes high-strength steels 4 in the 400–800 MPa range, used for bumper beams and door impact bars. Tier 3 is ultra-high-strength steel above 1,000 MPa, reserved for crash-critical structures like A-pillars and B-pillars.

When our engineering team in China reviews a new drawing, we check the Rockwell hardness scale 5 specification alongside tensile strength. Hardness tells us how the material will behave during stamping — particularly how much springback to expect. A part specified at HRB 70 will spring back more than one at HRB 50, which directly affects die design and dimensional accuracy.

For aluminum, the series number is your guide. The 5000 series (like Aluminum 5052-H32) gives you excellent formability and corrosion resistance for inner panels and fuel tanks. The 6000 series (like 6061-T6) is heat-treatable with better dent resistance — ideal for outer body panels. The trade-off is that aluminum requires different tooling and shows different springback characteristics compared to steel, so your supplier must have experience with it. To understand how these materials compare in practice, review the performance differences between SPCC, SUS304, and AL5052 stamping materials.

The key lesson: never pick a grade in isolation. Match it to your application's real demands, and resist the temptation to over-specify. Over-specifying drives up material cost, increases stamping difficulty, and extends lead times — problems we see regularly when reviewing drawings from new clients.

✔ Deep drawing quality (DDQ) steel grades like SPCD and DC03 are specifically designed for parts with complex, deep-drawn geometries True
DDQ grades have higher elongation and better r-values, allowing the material to flow into deep cavities without tearing or wrinkling.
✘ Higher tensile strength always means a better stamping material False
Higher strength often reduces formability, increases tool wear, and raises scrap rates. The best material is the one that balances strength and formability for the specific part geometry.
Video: Sample metal parts from audited Vietnamese factories in the DEWIN network. (@dewintech)

What Should I Ask My Supplier to Verify Material Grade Compliance?

During a recent supplier audit at a factory in Vietnam, we discovered that the steel coils on the production floor had no material identification tags. The operator said, "It's SPCC," but there was no Material Test Report to confirm it. That single finding delayed shipment by two weeks while we arranged independent testing.

Ask your supplier for the original mill Material Test Report (MTR) for every coil or sheet lot. Verify that the MTR lists chemical composition, tensile and yield strength, elongation percentage, and sheet metal thickness gauge. Cross-check these values against your drawing specification and the relevant ASTM and ISO standards before approving production.

Verifying supplier material test reports for stamping part grade compliance

The Five Questions Every Buyer Should Ask

Here is the checklist I recommend to every purchasing manager we work with:

  1. Can you provide the original mill MTR for this material lot? Not a copy from a previous order — the actual certificate tied to this specific coil or sheet. The MTR should list heat number, chemical composition, mechanical properties, and the applicable standard (ASTM, JIS, EN).

  2. What is the incoming material inspection process? A professional supplier measures sheet metal thickness gauge, hardness (Rockwell hardness scale), and surface condition before material enters the press. At our facilities, we do this on every incoming lot using calibrated instruments. Understanding which material specifications are critical for incoming inspection can help you evaluate your supplier's process.

  3. How do you trace material from coil to finished part? Traceability means every stamped part can be linked back to its raw material lot number. This is not optional for automotive or safety-critical applications — and it is increasingly required under "Digital Product Passport" regulations.

  4. What surface finish requirements does this grade support? Some grades come with specific surface roughness standards. If your part needs painting, powder coating, or plating, the base material's surface finish directly affects adhesion. Pre-coated or galvanized steels like G60 or G90 can eliminate secondary plating processes.

  5. Do you stock this grade, or do you procure it per order? Stocking common grades like SPCC or 304 stainless means faster lead times. Exotic grades like 22MnB5 or TRIP 780 often require minimum order quantities from the mill, adding 4–8 weeks.

What the MTR Should Contain

MTR Data Point Why It Matters What to Look For
Chemical Composition Confirms the grade identity Carbon %, Manganese %, Chromium % (for stainless)
Tensile Strength Confirms load-bearing capacity Must meet or exceed drawing specification (e.g., ≥ 270 MPa for SPCC)
Yield Strength Predicts springback and forming behavior Critical for structural parts — higher yield = more springback
Elongation % Indicates formability Higher elongation = better deep drawing quality
Thickness Tolerance Ensures dimensional accuracy Must match the sheet metal thickness gauge on your drawing (e.g., 1.2 mm ± 0.05)
Coating Weight (if applicable) Confirms corrosion protection level G60 = 60 g/m², G90 = 90 g/m² for galvanized
Heat/Lot Number Enables traceability Must be unique and match the physical tag on the coil

Don't Just Trust the Grade Name

One thing we have learned from managing supply chains across China and Vietnam 6 is that the grade name alone is not enough. Two coils labeled "SPCC" from different mills can have meaningfully different elongation values. One might stamp perfectly; the other cracks on the same die. This is why verifying the actual mechanical properties on the MTR matters more than the grade label.

For stainless steel, the difference between stainless steel 304 vs 316 is a good example. Both are austenitic, but 316 contains molybdenum for superior resistance to chloride corrosion 7. If your supplier substitutes 304 where 316 is specified — even unintentionally — the part could fail in a marine or chemical environment. Always verify the chromium and molybdenum content on the MTR.

Our PPAP process 8 includes material verification as a mandatory gate. No material enters production without an approved MTR on file. This "right first time" discipline is something our U.S. clients specifically value, because it eliminates the cycle of rework, returns, and re-inspection that plagues less rigorous supply chains.

✔ A Material Test Report (MTR) from the original steel mill is the most reliable way to verify that a stamping material meets its specified grade True
Mill-issued MTRs contain the actual tested chemical composition and mechanical properties of the specific heat or lot, providing verifiable traceability back to the source.
✘ If a supplier labels the material with the correct grade name, the properties are guaranteed to meet specification False
Grade labels indicate nominal properties, but actual values vary between mills and production lots. Without MTR verification, critical properties like elongation or yield strength may fall outside the acceptable range for your application.

How Do I Compare Material Grade Standards Between the U.S., China, and Vietnam?

One of the most frequent misunderstandings we resolve is when a U.S. buyer's drawing calls out "AISI 1010" and the Vietnamese supplier quotes "SPCC." The buyer assumes these are different materials. The supplier assumes the buyer knows they are equivalent. Neither side confirms, and the project stalls.

To compare material grade standards across the U.S., China, and Vietnam, use a cross-reference table mapping ASTM/AISI (U.S.), JIS (Japan, widely used in Vietnam), GB (China), and EN (Europe) designations. Always verify equivalence by comparing actual tensile strength, yield strength, and chemical composition ranges — not just the grade name — because regional standards allow slightly different tolerances.

Comparing ASTM, JIS, GB, and EN material grade standards across countries

Why the Confusion Exists

Different countries developed their own material standards independently. Japan uses JIS. Europe uses EN/DIN. The U.S. uses ASTM and AISI. China uses GB. Vietnam's domestic manufacturing primarily follows JIS standards because of decades of Japanese industrial influence, but many Vietnamese suppliers also work with EN and ASTM specifications when exporting to Europe and the U.S.

The grade names look completely different, but the underlying materials are often functionally equivalent. The problem is that "equivalent" does not mean "identical." There can be small differences in allowed carbon content, tensile ranges, or testing methods. These small differences rarely matter for non-critical brackets — but they can be significant for safety-critical or precision parts. For buyers sourcing for the U.S. market specifically, learning how to ensure sheet metal fabrication grades match US AISI/SAE standards is essential.

The Cross-Reference Table

This table covers the most common stamping grades our team encounters across projects sourced from China and Vietnam for U.S. buyers:

Material Type ASTM/AISI (U.S.) JIS (Japan/Vietnam) EN (Europe) GB (China) Typical Tensile Strength
Mild Steel (Commercial) AISI 1008/1010 SPCC DC01 Q195/Q235 270–370 MPa
Mild Steel (Drawing) AISI 1008 (DQSK) SPCD DC03 08Al 270–350 MPa
Mild Steel (Deep Drawing) AISI 1006 (DQSK+) SPCE DC04 08Al 270–340 MPa
Galvanized Steel A653 CS Type B SGCC DX51D+Z — 270–400 MPa
Stainless (Austenitic) AISI 304 SUS304 1.4301 (X5CrNi18-10) 06Cr19Ni10 520–720 MPa
Stainless (Ferritic) AISI 430 SUS430 1.4016 10Cr17 450–600 MPa
Stainless (Marine) AISI 316 SUS316 1.4401 06Cr17Ni12Mo2 520–680 MPa
Aluminum (Formable) 5052-H32 A5052P-H32 EN AW-5052-H32 5052-H32 210–260 MPa
Aluminum (Structural) 6061-T6 A6061P-T6 EN AW-6061-T6 6061-T6 290–310 MPa
Dual Phase Steel DP600 (SAE J2745) JSC590R HCT600X — 590–700 MPa

Practical Advice for Cross-Border Sourcing

When I review a new project, I never assume grade equivalence without checking the property ranges. Here is what I suggest:

  • Put the standard on your drawing. Do not just write "SPCC." Write "SPCC per JIS G3141 9" or "DC01 per EN 10130." This removes ambiguity.
  • Specify minimum mechanical properties. Add a note like "Tensile ≥ 270 MPa, Yield ≥ 140 MPa, Elongation ≥ 37%." This way, even if the supplier sources from a different regional mill, the properties must still meet your need.
  • Use ASTM and ISO standards as a common language. When you are sourcing from multiple Asian countries, referencing both the regional standard and the ISO equivalent reduces confusion.

Vietnam's steel mills and stamping factories increasingly stock JIS-standard coils because of Japanese OEM presence in the country. But if your drawing calls out EN or ASTM, a good supplier — like our Vietnam office — will cross-reference and confirm equivalence before cutting metal. A less experienced supplier might just guess, and that guess can be expensive.

What Mistakes Should I Avoid When Specifying Material Grades on My Drawings?

We once received a drawing from a new client that simply said "steel" in the material callout. No grade. No standard. No thickness tolerance. Our engineering team in China sent back twelve clarification questions before we could even begin quoting. That project lost three weeks before a single part was made.

Avoid these critical mistakes: calling out a grade name without referencing the governing standard, omitting minimum mechanical properties, failing to specify sheet metal thickness gauge and tolerance, neglecting surface finish requirements, and over-specifying expensive materials like 316 stainless when 304 or galvanized steel would suffice. Every ambiguity on your drawing becomes a risk of non-conforming parts.

Common material grade specification mistakes on stamping part engineering drawings

Mistake 1: Vague or Missing Material Callouts

Writing "mild steel" or "aluminum" without a grade is the single most common error. It forces the supplier to guess, and their guess may optimize for their cost — not your performance. Always specify the full grade designation and the applicable standard. For example: "Material: SPCC per JIS G3141, t = 1.2 mm ± 0.05 mm."

Mistake 2: Ignoring Formability Specifications

If your part has deep draws, tight radii, or complex bends, you need to specify deep drawing quality grades (SPCD, SPCE, DC03, DC04) rather than commercial quality (SPCC, DC01). Commercial quality steel has lower elongation and will crack in demanding geometries. I have seen buyers reject entire shipments because the supplier used SPCC for a part that clearly required SPCE-level formability.

Also consider specifying the n-value and r-value if your stamping involves severe forming. These values predict how well the material will flow into the die cavity without localized thinning. A minimum r-value of 1.6 and n-value of 0.20 is typical for deep-drawn automotive panels.

Mistake 3: Over-Specifying (The Expensive Error)

Over-specification is surprisingly common among buyers who want to "play it safe." Specifying stainless steel 304 vs 316 incorrectly is a classic example. If your part operates in a mildly corrosive indoor environment, 304 is more than adequate. Jumping to 316 adds 20–40% to material cost and increases stamping difficulty due to higher work-hardening rates.

Similarly, specifying a galvanized coating weight of G90 when G60 would meet the corrosion requirement adds unnecessary cost. Ask your engineer: what is the actual service environment?

Mistake 4: Forgetting Surface Finish and Coating Notes

Your drawing should state surface finish requirements explicitly. Are you painting the part? Powder coating? Leaving it raw? If the part will be powder-coated (like the black brackets in our product line), the base material's surface roughness affects adhesion. Cold rolled steel gives a smoother, more consistent surface than hot rolled — and that distinction should be on the drawing.

Mistake 5: Not Accounting for Regional Material Availability

Calling out a grade that your Asian supplier cannot source locally creates lead time problems. For instance, specifying a specific AHSS grade like TRIP 780 may require importing from a European or Japanese mill with a 6–8 week lead time and minimum order quantities. Always check with your supplier early in the design phase about material availability in their region.

A Quick Checklist for Your Drawing

  • Full grade name + governing standard (e.g., "SUS304 per JIS G4305")
  • Sheet metal thickness gauge and tolerance (e.g., "t = 1.5 mm ± 0.05 mm")
  • Minimum mechanical properties (tensile, yield, elongation)
  • Surface finish requirement (Ra value or descriptive, e.g., "2B finish")
  • Coating specification if applicable (e.g., "Zinc plating per ASTM B633 10, Type II")
  • Hardness range if critical (e.g., "HRB 55–75" on the Rockwell hardness scale)

When our team reviews a client's drawing during the co-development phase, we flag any of these gaps before quoting. This upfront discipline — what our U.S. clients call "right first time" engineering — prevents the rework and delays that erode trust and profitability on both sides.

✔ Specifying both the material grade name and its governing standard (e.g., “SPCC per JIS G3141”) on a drawing eliminates supplier ambiguity True
The governing standard defines exact chemical composition ranges, mechanical property minimums, and testing methods — removing any guesswork about what the grade name means in a specific regional context.
✘ Choosing the most expensive, highest-grade material always results in the best stamping part False
Over-specifying material increases cost, can make stamping more difficult (higher scrap rates, faster tool wear), and does not improve performance if the application does not require those properties.

Conclusion

Understanding common material grades of stamping parts comes down to matching properties to application, verifying compliance through MTRs, navigating global standards, and avoiding drawing mistakes. Get these fundamentals right, and you protect quality, cost, and delivery every time.

Frequently Asked Questions

How Do I Match Material Grades to My Stamping Part's Application Requirements?

A purchasing manager we work with in the Midwest once ordered 10,000 brackets in 304 stainless steel for an indoor electrical enclosure. The parts worked perfectly — but he overpaid by nearly 30% because cold rolled steel like DC01 would have met every requirement at a fraction of the cost.

What Should I Ask My Supplier to Verify Material Grade Compliance?

During a recent supplier audit at a factory in Vietnam, we discovered that the steel coils on the production floor had no material identification tags. The operator said, "It's SPCC," but there was no Material Test Report to confirm it. That single finding delayed shipment by two weeks while we arranged independent testing.

How Do I Compare Material Grade Standards Between the U.S., China, and Vietnam?

One of the most frequent misunderstandings we resolve is when a U.S. buyer's drawing calls out "AISI 1010" and the Vietnamese supplier quotes "SPCC." The buyer assumes these are different materials. The supplier assumes the buyer knows they are equivalent. Neither side confirms, and the project stalls.

Footnotes


1. ISO publishes the international standards referenced for cross-border material grade equivalence checks. ↩︎


2. CEN defines EN 10130, the European standard for cold-rolled steel grade equivalence. ↩︎


3. Background concept explaining why deep drawing quality grades resist tearing in complex forming. ↩︎


4. WorldAutoSteel documents advanced high-strength steel grades used in automotive crash structures. ↩︎


5. Background reference explaining how Rockwell hardness testing predicts stamping springback behavior. ↩︎


6. ITC supports international trade guidance relevant to managing cross-border manufacturing supply chains. ↩︎


7. Background explanation of chloride-induced corrosion relevant to choosing marine-grade stainless steel. ↩︎


8. AIAG defines the PPAP process as the standard for production part approval and traceability. ↩︎


9. JIS G3141 is the official Japanese standard for cold-rolled steel used by Vietnamese suppliers. ↩︎


10. ASTM B633 governs zinc electroplating specifications referenced in the drawing checklist. ↩︎

Manufacturing RFQ

Have a STEP Model or 2D Drawing for This Project?

Share your drawing, material, quantity and finishing requirements to begin a manufacturing quote. Confirm pricing, delivery and inspection requirements during the review.

Upload CAD & Get Quote →

This article is part of DEWIN's technical manufacturing engineering knowledge base. Factory-specific details come from each factory's profile page — please verify current information there or with our team.

Quick Sourcing Inquiry