US anti-dumping duties on sheet metal from Vietnam have thrown our sourcing plans into uncertainty — and our US clients are asking tough questions every week.
US anti-dumping duties of 40% to 88% on Vietnamese sheet metal, combined with a 46% general tariff and potential countervailing duties, dramatically increase total landed costs and make most direct sourcing from Vietnam economically unviable unless buyers work with specific low-rate Vietnamese producers and maintain rigorous compliance documentation.
The landscape has shifted fast. Below, I break down the real numbers, the compliance traps, the paperwork you need, and whether Vietnam still makes sense for your sheet metal supply chain.
How will US anti-dumping duties impact my total landed cost for sheet metal from Vietnam?
A client recently asked me to quote a set of precision sheet metal mounting brackets — the kind with complex bends, powder-coated finishes, and tight-tolerance mounting holes — for delivery to Texas mill test certificates 1. When I ran the numbers with the new duties layered in, the total landed cost 2 nearly doubled compared to six months ago.
Preliminary anti-dumping duties of 40–88%, a 46% general tariff on Vietnamese goods, and potential countervailing duties can push total tariff burdens above 87%, effectively doubling the landed cost of sheet metal parts sourced from Vietnam for US buyers.
/Essence%20-%20Photo/Products%20(1).jpg)
Breaking Down the Duty Layers
The US Department of Commerce 3 has imposed multiple layers of trade remedies on Vietnamese steel and sheet metal products. Each layer stacks on top of the others. Here is what you face:
| Duty / Tariff Type | Rate Range | Applies To |
|---|---|---|
| Anti-Dumping Duty 4 (Coated/Galvanized Steel) | 40% – 88.12% | Coated, galvanized, and corrosion-resistant steel from Vietnam |
| Countervailing Duties 5 (Subsidies) | ~1.08% (preliminary) | Subsidized Vietnamese steel producers |
| General Tariff on Vietnam | 46% | All imports from Vietnam |
| Circumvention Cash Deposit 6 | Up to 456.23% | Steel with Korean/Taiwanese substrate processed in Vietnam |
The Vietnam-wide entity rate sits at 88.12%. This is the default rate. If your supplier did not cooperate with the US Department of Commerce investigation or is not individually named, you pay 88.12% — plus the 46% general tariff. That is a combined hit of over 134% before you even add freight, insurance, or brokerage.
Individual Company Rates Matter
Not every Vietnamese supplier faces the same dumping margins. A few cooperating firms received lower individual rates:
| Vietnamese Producer | Anti-Dumping Rate (Coated Steel) |
|---|---|
| Ton Dong A Corporation | 39.84% |
| China Steel & Nippon Steel Vietnam JSC / Hoa Phat Steel Sheet LLC | 49.42% |
| Hoa Sen Group | 59.00% |
| All Other Vietnamese Entities | 88.12% |
If your sheet metal supplier sources raw galvanized steel or coated steel from Ton Dong A, your anti-dumping burden drops to roughly 40%. Add the 46% general tariff and roughly 1% countervailing duties, and you still face about 87% total. That is painful — but it is half the cost of the 88.12% default.
A Real-World Cost Example
Let me walk through a practical scenario. Say you are importing custom sheet metal brackets worth $10,000 FOB Ho Chi Minh City.
- Anti-dumping duty (best case, Ton Dong A rate): $3,984
- General tariff (46%): $4,600
- Countervailing duties (~1%): $100
- Total duties: $8,684
- Total landed cost (before freight/insurance): $18,684
Your $10,000 order just became nearly $19,000 in duties alone. At the Vietnam-wide entity rate, that number climbs to over $23,500.
This math explains why many US buyers are pausing Vietnam-sourced sheet metal orders. The export competitiveness of Vietnamese steel has been severely diminished by these layered trade protectionism measures.
The Rebar and CORE Steel Warning
The trend extends beyond coated sheet metal. Steel rebar imports from Vietnam face duties up to 130.77%. A separate investigation into corrosion-resistant steel could impose dumping margins as high as 158.83% on non-cooperating producers. These numbers signal that the US government is casting a wide net across Vietnamese steel products.
How can I verify that my Vietnamese supplier is compliant and not just rerouting Chinese materials?
One lesson our team in Vietnam learned early: not every "Vietnamese" sheet metal part is truly Vietnamese. During a supplier audit last year, we discovered a facility that was importing pre-cut Chinese steel substrate, applying a light coating in Vietnam, and exporting it as a Vietnamese product. That kind of arrangement can trigger catastrophic penalties.
To verify compliance, US buyers should conduct on-site supplier audits, require mill test certificates tracing raw materials to Vietnamese producers, confirm the supplier's individual anti-dumping rate with the US Department of Commerce, and ensure the steel substrate was not merely processed or transshipped through Vietnam from China, Korea, or Taiwan.

Why Circumvention Is the Biggest Risk
The US government has already ruled that steel produced in Korea or Taiwan and shipped to Vietnam for minor processing — such as coating or slitting — constitutes circumvention of existing anti-dumping orders. The penalty for this is not a slap on the wrist. Cash deposit rates for circumvented shipments can reach 456.23%. That is not a typo.
This means if you import sheet metal brackets from a Vietnamese fabricator who used Korean or Taiwanese substrate that was merely finished in Vietnam, you could face a duty rate that is more than four times the value of the product itself. US Customs is actively investigating these supply chains.
A Practical Verification Checklist
Here is how our team approaches supplier verification when we help US clients source custom parts from Vietnam:
- Request mill test certificates (MTCs) for all raw steel. The MTC must trace back to a Vietnamese steel mill — not a trading company.
- Conduct an on-site audit. Visit the factory floor. Check raw material storage. Look for coils or sheets with foreign mill markings.
- Confirm the supplier's individual anti-dumping rate. Cross-reference with the US Department of Commerce Federal Register notices. If the supplier is not listed individually, they default to the 88.12% Vietnam-wide entity rate.
- Review purchase orders and invoices between your supplier and their steel source. The paper trail must show domestic Vietnamese procurement.
- Ask for heat numbers and coil identification. These should match the MTCs and trace back to the original Vietnamese melt.
What "Minor Processing" Means
The US defines "minor processing" broadly. Simply coating, slitting, cutting to length, or performing light fabrication on imported substrate does not change the country of origin 7 for anti-dumping purposes. The steel must undergo substantial transformation in Vietnam. For sheet metal parts like the precision brackets and mounting components we produce, the fabrication process — laser cutting, CNC bending, welding, powder coating — can constitute substantial transformation. But the key is that the raw steel itself must be Vietnamese in origin.
Supply chain diversification sounds appealing, but it must be done correctly. Moving production from China to Vietnam only to use Chinese steel substrate is a compliance trap that can result in penalties far worse than the original duties you were trying to avoid.
What specific documentation do I need to provide to US Customs to avoid unexpected duty penalties?
When we shipped a batch of custom galvanized steel enclosures to a client in Ohio last quarter, the freight forwarder flagged an issue: the commercial invoice did not list the specific anti-dumping case number. That single omission could have triggered a hold, a secondary review, and a default to the Vietnam-wide entity rate. Paperwork errors in this environment are expensive.
To avoid unexpected duty penalties, US importers must provide a complete entry package including the commercial invoice with anti-dumping case numbers, mill test certificates proving Vietnamese origin, a certificate of origin, the correct Harmonized Tariff Schedule code, and any required cash deposit payments matching their supplier's individual dumping margin rate.

The Essential Documentation Package
Every shipment of sheet metal from Vietnam entering the US under an active anti-dumping order requires careful documentation. Missing or incorrect documents can result in holds, liquidated damages, or retroactive duties at the highest available rate.
| Document | Purpose | Key Detail to Include |
|---|---|---|
| Commercial Invoice | Declares value and product description | Must reference the AD/CVD case number |
| Mill Test Certificate (MTC) | Proves steel origin and composition | Heat number, mill name, country of melt and pour |
| Certificate of Origin 8 | Confirms country of manufacture | Must be issued by a recognized authority |
| HTS Classification | Determines applicable duty rate | Use the correct subheading for coated/galvanized/corrosion-resistant steel |
| AD/CVD Cash Deposit Receipt | Shows duties paid at entry | Must match the supplier's individual rate or the Vietnam-wide rate |
| Bill of Lading | Transport record | Verify shipping origin matches declared origin |
| Packing List | Itemizes shipment contents | Must match the commercial invoice quantities |
The HTS Code Trap
One area where I see US buyers stumble is the Harmonized Tariff Schedule classification. Harmonized Tariff Schedule code 9 Sheet metal products can fall under different HTS codes depending on whether they are coated, galvanized, or corrosion-resistant. Each classification may carry different Section 232 tariffs 10 and anti-dumping duty rates. If you classify your product incorrectly — even by accident — US Customs can reclassify it and apply the higher rate retroactively.
For example, a coated steel bracket might fall under one HTS code, while the same bracket in bare cold-rolled steel falls under another. The anti-dumping duty rate could differ by tens of percentage points. Work with a licensed customs broker who specializes in steel products.
Timeline Pressure: Final Rulings Are Coming
The final DOC ruling for coated steel is expected around August 18, with the ITC final determination following in October 2025. The rebar final determination is expected in July. These dates matter because:
- Preliminary rates become final rates (or get adjusted) at these milestones.
- If rates increase at the final determination, US Customs can retroactively collect the difference.
- Buyers who locked in contracts based on preliminary rates may face unexpected cost increases.
I strongly recommend that any US buyer currently importing sheet metal from Vietnam consult with a trade attorney and a specialized customs broker before the August deadline. The cost of professional guidance is a fraction of the cost of a misclassified entry or a retroactive duty assessment.
Should I still move my sheet metal production to Vietnam despite the current trade environment?
A purchasing manager at one of our US accounts recently put it bluntly: "I spent two years qualifying a Vietnamese sheet metal supplier. Now you're telling me the duties make it more expensive than domestic?" The frustration is real. But the answer is not a simple yes or no.
Moving sheet metal production to Vietnam can still make sense for US buyers if they partner with specific Vietnamese producers holding low individual anti-dumping rates, verify raw material origin rigorously, and treat Vietnam as one node in a diversified multi-country sourcing strategy rather than a sole-source replacement for China.
.jpg)
When Vietnam Still Works
Despite the tariff wall, there are scenarios where Vietnam remains viable for sheet metal sourcing:
- Your supplier has a low individual rate. If you source from Ton Dong A (39.84%), your anti-dumping burden is manageable — though still significant when combined with the 46% general tariff.
- Your parts are highly custom and labor-intensive. For complex fabricated components — brackets with multiple bends, welded assemblies, powder-coated enclosures — the labor and fabrication cost savings in Vietnam may still offset part of the duty burden, especially for mid-to-high quality requirements.
- You are sourcing fabricated parts, not raw sheet metal. The anti-dumping orders target specific steel products (coated, galvanized, corrosion-resistant steel). If your Vietnamese supplier fabricates finished custom parts from locally sourced steel, the finished part may classify under a different HTS code that is not subject to the anti-dumping order. This requires careful classification analysis.
When Vietnam Does Not Work
For commodity sheet metal — large volumes of flat galvanized panels, standard coated sheets, or basic corrosion-resistant steel — the math simply does not add up. The combined tariff burden of 87% or more eliminates the cost advantage. In these cases, you need sourcing alternatives.
Comparing Regional Options
Here is how Vietnam stacks up against other sourcing regions for the US market right now:
| Country | Key Duty / Tariff on Steel Products | Pros | Cons |
|---|---|---|---|
| Vietnam | 40–88% AD + 46% general | Strong fabrication capabilities, growing workforce | Severe tariff burden, circumvention risk |
| India | Varies; no current AD on most sheet metal | Large steel industry, competitive pricing | Quality consistency, logistics lead times |
| Thailand | Lower general tariff exposure | Established manufacturing base | Smaller sheet metal sector, higher labor costs |
| Mexico | No general tariff (USMCA) | Proximity, duty-free access for qualifying goods | Higher labor costs, capacity constraints |
| Domestic US | No import duties | Zero tariff risk, short lead times | Highest production costs, capacity bottlenecks |
The Multi-Country Strategy
From our experience helping US clients navigate this environment, the most resilient approach is not to pick one country. It is to build a multi-country supply chain. We maintain a local team in Vietnam with seven employees who handle supplier audits, process control, and quality inspections. We also have 21 employees in China managing production for markets outside the US. This dual presence lets us shift production between countries as trade policies change.
For US-bound sheet metal, we are actively qualifying suppliers in India and Thailand alongside our Vietnamese partners. The goal is to ensure that when one sourcing lane becomes uneconomical — as Vietnam has for many steel products — we can redirect to another without starting from scratch.
The Bottom Line on Timing
The final anti-dumping determinations are weeks away. If you are mid-project with a Vietnamese sheet metal supplier, do not panic — but do act. Lock in your contracts with clear duty allocation clauses. Confirm your supplier's individual rate in writing. And start qualifying backup suppliers in at least one alternative country.
Trade protectionism in the steel sector is not going away. The surge in Vietnamese rebar exports — from 43 tonnes in 2022 to 56,400 tonnes in 2024 — drew exactly the kind of attention that leads to more investigations. Sheet metal could be next. Building flexibility into your supply chain now is cheaper than scrambling later.
Conclusion
US anti-dumping duties have fundamentally changed the economics of sourcing sheet metal from Vietnam. Act now — verify your supplier's rate, secure your documentation, and diversify your supply chain before final rulings hit. For a broader understanding of what US import tariffs apply when sourcing sheet metal fabrication from Vietnam, and to explore how to use Vietnam’s FTAs to reduce import duties, review our detailed guides.
Frequently Asked Questions
How will US anti-dumping duties impact my total landed cost for sheet metal from Vietnam?
A client recently asked me to quote a set of precision sheet metal mounting brackets — the kind with complex bends, powder-coated finishes, and tight-tolerance mounting holes — for delivery to Texas mill test certificates 1 . When I ran the numbers with the new duties layered in, the total landed cost 2 nearly doubled compared to six months ago.
How can I verify that my Vietnamese supplier is compliant and not just rerouting Chinese materials?
One lesson our team in Vietnam learned early: not every "Vietnamese" sheet metal part is truly Vietnamese. During a supplier audit last year, we discovered a facility that was importing pre-cut Chinese steel substrate, applying a light coating in Vietnam, and exporting it as a Vietnamese product. That kind of arrangement can trigger catastrophic penalties.
What specific documentation do I need to provide to US Customs to avoid unexpected duty penalties?
When we shipped a batch of custom galvanized steel enclosures to a client in Ohio last quarter, the freight forwarder flagged an issue: the commercial invoice did not list the specific anti-dumping case number. That single omission could have triggered a hold, a secondary review, and a default to the Vietnam-wide entity rate. Paperwork errors in this environment are expensive.
Footnotes
1. Explains the purpose and content of mill test certificates for material traceability and quality control. ↩︎
2. Defines total landed cost, encompassing all expenses to get a product from supplier to destination. ↩︎
3. Official source for information on the US Department of Commerce’s role in trade. ↩︎
4. Defines anti-dumping duties and their purpose in international trade enforcement. ↩︎
5. Explains countervailing duties, which are imposed to offset foreign government subsidies. ↩︎
6. Defines circumvention in the context of anti-dumping and countervailing duty orders. ↩︎
7. Explains how Customs and Border Protection determines the country of origin for imported goods. ↩︎
8. Replaced HTTP 404 with an authoritative International Chamber of Commerce (ICC) page defining Certificates of Origin. ↩︎
9. Provides the official Harmonized Tariff Schedule for classifying goods for import duties. ↩︎
10. Replaced HTTP 404 with an authoritative U.S. Department of Commerce, Bureau of Industry and Security (BIS) page explaining Section 232 tariffs. ↩︎
/Chin%20Well%20-%20Photo/Samples%20(1).jpg)