When our clients started asking us to shift their sheet metal fabrication 1 orders out of China last year, the urgency in their voices was unmistakable.
US Section 301 tariff changes create a powerful incentive to source sheet metal fabrication from Vietnam, where current tariffs are zero compared to China’s 25–145%. However, new USTR investigations into Vietnam’s IP protection and forced labor practices could impose 10–12.5% tariffs by late July 2026, making immediate action critical.
The tariff landscape is shifting fast. This article breaks down the real cost savings, the emerging risks, the compliance requirements, and the quality control steps you need to take right now US Section 301 tariff changes 2. Let me walk you through what we are seeing on the ground.
How much can I reduce my total landed cost by moving sheet metal fabrication from China to Vietnam?
A buyer we work with in the Midwest recently ran a side-by-side cost comparison on a family of CNC-machined steel brackets. The numbers surprised even him.
By moving sheet metal fabrication from China to Vietnam, you can reduce your total landed cost by 45–55% on average. Vietnam's base manufacturing costs run 30–50% lower than China's, and with zero Section 301 tariffs currently applied, a $500,000 annual spend could yield $225,000–$275,000 in savings.

The Direct Math: China vs. Vietnam
Let me lay out the numbers plainly. Suppose you spend $500,000 per year on stamped and machined sheet metal parts from China. The Section 301 tariff adds at minimum 25% to that cost. Your total landed cost 3 becomes $625,000 — before freight, duties on other categories, or broker fees.
Now consider Vietnam. The same parts, produced to the same drawings, cost $350,000–$400,000 at the factory gate. Vietnam's base manufacturing costs are genuinely lower. Labor rates are competitive. Raw material sourcing is efficient. And right now, Section 301 tariffs on these specific HTS codes 4 are zero.
| Cost Factor | China Source | Vietnam Source |
|---|---|---|
| Annual part spend (factory gate) | $500,000 | $350,000–$400,000 |
| Section 301 tariff rate | 25–145% | 0% |
| Tariff cost (at 25% minimum) | $125,000 | $0 |
| Total landed cost (approximate) | $625,000+ | $350,000–$400,000 |
| Annual savings vs. China | — | $225,000–$275,000 |
That table tells the story. But there is more to it than just the tariff line.
Why Sheet Metal Is Especially Targeted
Sheet metal fabrication — stamped components, machined brackets, welded housings — falls under HTS codes in the 73xx and 74xx series. These categories have been heavily targeted by Section 301 actions on Chinese imports. The tariffs are not accidental. They reflect a deliberate US policy to penalize China's metal products manufacturing sector.
When we help clients move their sourcing strategies from China to Vietnam, these are often the first part families we transition. The tariff exposure is highest, so the savings are most immediate.
Beyond Tariffs: Total Cost of Ownership
The savings go deeper than tariff avoidance. Our Vietnam office manages supplier relationships locally. We see that Vietnamese factories often have newer equipment — CNC laser cutters, automated press brakes — purchased with foreign investment capital. Tooling costs are competitive. And because Vietnam is actively courting export competitiveness in metal fabrication, lead times have improved steadily over the past two years.
But I want to be honest: there are transition costs. New tooling, first-article inspections, qualification runs, and logistics setup all take time and money. For most clients, those costs are recovered within the first two purchase orders.
Will my Vietnamese sheet metal imports be subject to future Section 301 tariff increases?
One of the hardest conversations I have with clients is about what comes next. Everyone loves the savings today. But the trade policy environment is not standing still.
Yes, Vietnamese sheet metal imports face a real risk of future Section 301 tariff increases. The USTR launched investigations in March 2026 into Vietnam's IP protection and forced labor practices. Proposed tariffs of 10–12.5% could take effect in late July 2026, and these rates may stack on top of each other.

The Two Investigations You Need to Know
On March 29, 2026, the USTR announced a new Section 301 investigation into Vietnam's failure to protect intellectual property 6. This is significant. Vietnam was designated a "Priority Foreign Country" in the 2026 Special 301 Report — the first such designation in 13 years. The USTR does not hand out PFC status lightly. It signals serious enforcement action ahead.
Separately, on March 12, 2026, the USTR launched a forced labor investigation covering 60 economies, including Vietnam. forced labor practices 7 Findings were announced on June 2, 2026. The proposed tariff rates are:
| Investigation | Proposed Tariff Rate | Status | Key Date |
|---|---|---|---|
| Forced labor (partial preventive regime) | 10% | Public hearing scheduled | July 6, 2026 |
| Forced labor (no preventive regime) | 12.5% | Public hearing scheduled | July 6, 2026 |
| IP protection (PFC designation) | ~10% (recommended for 40 countries) | Comment period open | Late July 2026 action |
The Stacking Problem
Here is what keeps me up at night. If both the IP tariff and the forced labor tariff apply to Vietnam, they will likely stack. That means Vietnam could face a combined tariff rate exceeding 20%.
Now, compare that to the current situation. China faces 25–145%. Even at a stacked 20%, Vietnam still wins on the tariff math alone — and its base manufacturing costs are 30–50% lower. So the sourcing case for Vietnam does not collapse. But the margin of advantage shrinks.
The broader context matters too. The US is transitioning from the IEEPA-based tariff regime to a Section 301-based approach. This "Third Tariff Regime" relies on administrative records, public comment periods, and formal investigations. It creates more procedural steps — but also more uncertainty for companies making long-term supply chain diversification decisions.
What This Means for Your Sourcing Timeline
The public hearing is July 6, 2026. Presidential action could follow in late July. If you are considering a move to Vietnam, there is a window right now to lock in contracts at the current zero-tariff rate. Shipments in transit before any tariff action takes effect may be grandfathered, depending on the implementation rules.
I am advising every client to accelerate their qualification timelines. Get your first articles approved. Get your purchase orders placed. The window may not stay open long. At the same time, this does not mean Vietnam becomes unviable even with new tariffs. It simply means the math changes, and you need to plan for multiple scenarios.
How do I verify that my Vietnam-sourced parts comply with US "Country of Origin" requirements to avoid penalties?
Last year, a prospective client came to us after US Customs flagged one of their shipments. The parts were labeled "Made in Vietnam," but Customs suspected they were actually Chinese components that had been lightly processed and re-exported. The penalties were severe, and the reputational damage was worse.
To verify Country of Origin compliance, you must confirm that your Vietnam-sourced parts undergo "substantial transformation" in Vietnam — meaning the manufacturing process fundamentally changes the character, name, or use of the raw material. Document every production step, maintain mill certificates, and ensure your supplier is not engaged in transshipment practices from China.

What "Substantial Transformation" Actually Means
US Customs and Border Protection uses the "substantial transformation" test. A product's country of origin 8 is where it was last substantially transformed into a new and different article of commerce. For sheet metal fabrication, this means the raw steel or aluminum must be cut, formed, welded, and finished in Vietnam — not merely assembled or packaged.
Here is a practical checklist we use with our Vietnam team:
Key Compliance Steps
-
Trace raw material origin. Get mill certificates for the steel or aluminum. Know where the coils or plate come from. Chinese-origin steel processed in Vietnam is fine — as long as the fabrication in Vietnam constitutes substantial transformation.
-
Document every production step. Laser cutting, stamping, bending, welding, surface treatment, and inspection must all happen in Vietnam. Keep photos, work orders, and machine logs.
-
Audit for transshipment. This is the biggest risk. Some suppliers import finished or semi-finished parts from China, do minor rework in Vietnam, and re-export them as Vietnamese origin. US Customs is aggressively targeting these transshipment practices. We conduct unannounced factory visits specifically to check for this.
-
Use a formal Country of Origin declaration. Require your supplier to sign a written declaration confirming the origin of the goods. Include this in your purchase agreement.
-
Engage a third-party inspector. Independent verification adds a layer of protection. Our team performs in-process inspections at the Vietnamese factory to confirm that fabrication is genuinely taking place on-site.
| Compliance Action | Purpose | Who Is Responsible |
|---|---|---|
| Mill certificate collection | Verify raw material origin | Supplier, verified by buyer |
| Production documentation (photos, logs) | Prove substantial transformation | Supplier |
| Unannounced factory audits | Detect transshipment | Buyer or third-party agent |
| Signed Country of Origin declaration | Legal protection | Supplier (contractual) |
| In-process inspection | Confirm on-site fabrication | Third-party inspector |
The Penalty Landscape
If CBP determines that your parts were not substantially transformed in Vietnam, you face retroactive tariffs at the China rate (25–145%), plus potential penalties for misclassification. In serious cases, goods can be seized. Your importer of record — which is usually you, the US buyer — bears the liability.
Trade compliance is not optional. It is the foundation of any viable supply chain diversification strategy. I tell every client: the cheapest part is never cheap if it gets held at the port. For a detailed overview of US customs clearance requirements when sourcing from Vietnam, proper preparation is essential.
What steps should I take to ensure my Vietnamese supplier maintains the quality standards I previously had in China?
The toughest question we hear is not about tariffs. It is about quality. Purchasing managers who have spent years developing Chinese suppliers are understandably nervous about starting over. One client told me directly: "I cannot afford a single bad shipment."
To maintain quality standards when switching to Vietnam, implement a structured supplier qualification process including PPAP documentation, first-article inspection, in-process quality gates, and regular on-site audits. Work with an experienced supply chain partner who has local presence in Vietnam to bridge the communication and process gaps.

The Quality Gap Is Real — But Manageable
Vietnam's sheet metal fabrication industry has matured significantly. Many factories now operate CNC equipment from the same OEMs used in China and Japan. But equipment alone does not guarantee quality. The difference often comes down to process discipline, communication, and documentation habits.
Here is what we do when onboarding a new Vietnamese supplier for a US client:
Supplier Qualification Process
Step 1: Capability Assessment. Before placing any order, we visit the factory. We check equipment lists, operator certifications, and past project references. We look at their quality management system — is it ISO 9001 certified? Do they actually follow it?
Step 2: PPAP (Production Part Approval Process). We require full PPAP documentation 9 before mass production begins. This includes dimensional reports, material certifications, process flow diagrams, and control plans. Many Vietnamese suppliers are unfamiliar with PPAP. Our team walks them through it step by step.
Step 3: First Article Inspection (FAI). The first production run is inspected against the engineering drawings — every dimension, every tolerance, every surface finish requirement. We use calibrated CMM equipment and document everything. If the FAI fails, we do not proceed until the root cause is corrected.
Step 4: In-Process Quality Gates. During production, we set inspection checkpoints at critical stages — after cutting, after forming, after welding, after surface treatment. This catches defects early, before they become expensive.
Step 5: Final Inspection. Before shipment, we perform a final inspection per AQL standards. We check dimensions, visual quality, packaging, and labeling. Only conforming lots ship.
Communication Is Half the Battle
In our experience working with both Chinese and Vietnamese factories, the biggest quality failures come from miscommunication — not from bad equipment or lazy workers. Vietnamese engineers may interpret a drawing note differently than you intended. Tolerances that seem obvious to a US engineer may not be standard practice in Vietnam.
This is where having a local team makes the difference. Our seven-person Vietnam office reviews every drawing before it goes to the supplier. We flag ambiguous dimensions, clarify GD&T callouts, and confirm material specifications. The goal is simple: get it right the first time. Rework and returns destroy any cost savings from sourcing quality sheet metal fabrication using Vietnam’s labor cost advantage.
Ongoing Supplier Management
Quality is not a one-time event. It requires continuous engagement. We schedule regular on-site audits — monthly for new suppliers, quarterly for established ones. We track reject rates, delivery performance, and corrective action closures. If a supplier's performance degrades, we escalate immediately.
Vietnamese manufacturers are increasingly investing in automation, robotics, and Industry 4.0 technologies. This is encouraging. As they adopt digital quality systems — real-time SPC, automated measurement, traceability software — the consistency of their output improves. But these investments take time to mature. In the meantime, hands-on quality management by experienced people remains essential.
Conclusion
Vietnam offers the most compelling cost advantage for sheet metal fabrication sourcing today — but the window demands action, not hesitation. Audit your suppliers, accelerate your contracts, and build compliance into every step of your global supply chains before the late July 2026 tariff decisions reshape the landscape again.
Frequently Asked Questions
How much can I reduce my total landed cost by moving sheet metal fabrication from China to Vietnam?
A buyer we work with in the Midwest recently ran a side-by-side cost comparison on a family of CNC-machined steel brackets. The numbers surprised even him.
Will my Vietnamese sheet metal imports be subject to future Section 301 tariff increases?
One of the hardest conversations I have with clients is about what comes next. Everyone loves the savings today. But the trade policy environment is not standing still.
How do I verify that my Vietnam-sourced parts comply with US "Country of Origin" requirements to avoid penalties?
Last year, a prospective client came to us after US Customs flagged one of their shipments. The parts were labeled "Made in Vietnam," but Customs suspected they were actually Chinese components that had been lightly processed and re-exported. The penalties were severe, and the reputational damage was worse.
Footnotes
1. Explains the processes and materials involved in metal fabrication. ↩︎
2. Official USTR information on Section 301 tariff actions and processes. ↩︎
3. Defines total landed cost and its components in supply chain. ↩︎
4. Explains Harmonized Tariff Schedule codes and their purpose in imports. ↩︎
5. Official listing of ongoing and past Section 301 investigations by USTR. ↩︎
6. Provides official USTR information on intellectual property protection and enforcement. ↩︎
7. Official USTR announcement regarding findings and proposed actions on forced labor. ↩︎
8. Official US Customs and Border Protection guidance on country of origin marking. ↩︎
9. Official standard for Production Part Approval Process (PPAP) in manufacturing. ↩︎
