Using the EVFTA to reduce tariffs on stamping parts from Vietnam sounds simple until a shipment gets held at Rotterdam. Our Vietnam team learned that the hard way early on.
To reduce tariffs on stamping parts under the EVFTA, confirm the correct HS code, prove Vietnamese origin under the Rules of Origin, obtain a Certificate of Origin Form EUR.1 or a REX-based origin declaration, and claim preferential tariff treatment at the moment of EU import.
That is the short answer. The details decide whether you actually save money or pay full duty. Let me walk you through each step, in plain terms.
What Documents Do I Need to Prove Vietnamese Origin for My Stamping Parts?
A buyer once asked me why his broker rejected a perfectly good invoice as proof of origin. Our sourcing team in Vietnam sees that confusion in almost every first-time EVFTA shipment.
You need a Certificate of Origin Form EUR.1 issued in Vietnam, or an origin declaration from a REX-registered exporter for consignments over EUR 6,000. Supporting records include production data, material invoices, supplier declarations, and cost breakdowns proving the parts meet EVFTA origin rules.
/12-05-2025-Pictures%20-%20Name/Hydraulic%20press%201.jpg)
The EVFTA gives you two documentary paths. Which one you use depends on the shipment value and the exporter's registration status. I will break both down.
Path 1: Certificate of Origin Form EUR.1
This is the traditional route. The Vietnamese exporter applies to the issuing authority in Vietnam 1, submits production evidence, and receives a stamped EUR.1 movement certificate. It travels with the shipment. Your EU customs broker presents it at import. It works for any consignment value. But it takes time. In our experience, first-time applications can add several days to the export schedule if the paperwork is not prepared early.
Path 2: Origin Declaration via REX
The second route is a self-declared statement on origin. For consignments at or above EUR 6,000, the exporter must hold REX system registration 2 or authorized exporter status. For consignments below EUR 6,000, any exporter can issue the declaration on the invoice. This route is faster once set up. Most of our repeat clients push their Vietnamese suppliers toward it.
| Document Route | Who Can Use It | Consignment Value | Speed |
|---|---|---|---|
| EUR.1 certificate | Any exporter | Any value | Slower, official stamp needed |
| Origin declaration (REX) | REX-registered exporters | ≥ EUR 6,000 | Fast, self-issued |
| Origin declaration (any exporter) | Any exporter | < EUR 6,000 | Fast, self-issued |
The Supporting Evidence Behind the Certificate
The certificate is only the front page. Behind it, the exporter must keep proof. That means steel coil purchase invoices, bills of materials 3, production records, and cost statements. EU customs can audit these documents years after import. We advise suppliers to keep records for at least three years. If the paper trail is thin, the certificate can be invalidated retroactively, and the importer pays the difference plus penalties.
How Do I Verify That My Vietnam Supplier Actually Qualifies for EVFTA Preferential Rates?
During a supplier audit near Hai Phong last year, we found a stamping shop buying pre-formed blanks from abroad and only doing final trimming. That part would never qualify.
Verify that the supplier performs substantial transformation in Vietnam, meaning the stamping process changes the tariff heading of imported steel or meets the product-specific value-added threshold. Audit their material sourcing, production records, and REX system registration before relying on any origin claim.

The Rules of Origin are the gatekeeper of the entire agreement. A supplier can promise EVFTA rates all day. Only their actual production process decides whether the promise holds. Here is how I verify it.
Understand the Two Qualifying Pathways
A stamping part qualifies as originating in one of two ways. First, it can be wholly obtained in Vietnam. That is rare for metal fabrication manufacturing 4, because most steel coil is imported. Second, and far more common, non-originating materials must undergo sufficient working or processing in Vietnam. For most stamped steel articles, the Product Specific Rule 5s require a Change of Tariff Heading (CTH) or a maximum share of non-originating material value. Genuine stamping — blanking, punching, bending, forming from raw coil — usually achieves the tariff shift. Minimal operations like cutting, cleaning, or repackaging never do.
What I Check On-Site
Our Vietnam office runs a simple verification sequence during supplier audits:
- Trace the raw material. Where does the steel coil come from? Get the import documents.
- Watch the process. Does the supplier blank, punch, and form in-house? Or do they buy semi-finished parts?
- Check the math. Ask for a cost breakdown showing the non-originating material share against the FOB price.
- Confirm registration. Ask for their REX number or their history of EUR.1 issuance.
- Test the de minimis rule. Non-originating materials that fail the transformation rule may still pass if they stay within 10% of the ex-works price — useful for imported fasteners or coatings.
Cumulation Can Help
Do not forget regional cumulation. The EVFTA allows certain materials from South Korea, and fabrics under specific conditions, to count as originating. For stamping parts, extended cumulation with Korean steel inputs can rescue a part that would otherwise fail the value threshold. Ask your supplier if their coil source qualifies.
Which Stamping Part HS Codes Should I Check Before Claiming EVFTA Tariff Reductions?
Classification arguments cost real money. We once spent two weeks with a client's broker debating whether a formed mounting clip belonged in Chapter 73 or Chapter 87. The duty gap was significant.
Check HS Chapter 73 for general steel stamping parts, especially heading 7326 for other articles of iron or steel, and Chapter 87, heading 8708, for vehicle-specific stampings. The correct HS code classification determines your exact tariff phase-out schedule and applicable origin rule.

The HS code drives everything. It sets the base tariff, the phase-out timeline, and the Product Specific Rule you must satisfy. Get it wrong and both the duty rate and the origin claim can collapse.
The Codes That Matter for Stampings
Most stamped brackets, clips, and mounting hardware fall into a handful of headings. The table below shows the typical candidates for parts like the precision brackets and zigzag mounting clips we source for machinery and automotive clients.
| HS Heading | Description | Typical Products | EVFTA Treatment |
|---|---|---|---|
| 7326.90 | Other articles of iron or steel | General stamped brackets, clips | Mostly duty-free at entry into force |
| 7318 | Screws, bolts, washers, fasteners | Stamped washers, retaining clips | Immediate or short phase-out |
| 8708.99 | Other parts for motor vehicles | Automotive stamped brackets | Phase-out over transition period |
| 8302 | Base metal mountings and fittings | Furniture and building hardware | Mostly duty-free at entry into force |
Why the Distinction Changes Your Savings
The EVFTA eliminated 99% of tariffs overall, with 71% of duties on Vietnamese goods removed immediately in August 2020 and the rest phased out over up to seven years. By 2027, essentially all industrial lines reach zero. But during the transition, a part classified under 8708 may still carry residual duty while the same shape under 7326 enters free. Function decides classification. A bracket designed solely for a vehicle usually goes to Chapter 87. A general-purpose mounting bracket stays in Chapter 73.
Lock In the Classification
For complex stamped assemblies, I recommend requesting a Binding Tariff Information (BTI) ruling 6 from EU customs. It locks the classification for three years and removes the risk of reclassification at the border. It is free, and for repeat shipments it is one of the cheapest insurance policies available.
One more forward-looking point: the Carbon Border Adjustment Mechanism 7 now requires emissions reporting for many iron and steel products. CBAM does not erase your EVFTA savings, but it adds a data obligation on the embedded carbon of the steel. Start collecting mill data from your Vietnamese supplier now.
What Mistakes Could Cause Me to Lose EVFTA Benefits When Importing Stamping Parts?
Every quarter, our project managers review shipment files for exactly one reason: small paperwork errors are the number-one way importers hand duty savings back to customs.
The costliest mistakes are failing to claim preference at the time of import, using an origin declaration from a non-registered exporter on large consignments, weak proof of sufficient processing, wrong HS codes, and third-country alteration during transit that breaks the non-alteration rule.
/ICHI-%20Photo/150-ton%20Stamping%20Press%20Machine%201.jpg)
Most failures are avoidable. They come from process gaps, not bad intent. Here are the traps I see most often, ranked by how expensive they tend to be.
The Five Traps, Ranked
| Rank | Mistake | Consequence | Prevention |
|---|---|---|---|
| 1 | Not claiming preference at import | No refund possible later under Vietnam-side rules | Instruct your broker before arrival |
| 2 | Non-registered exporter self-declares on ≥ EUR 6,000 shipment | Claim rejected; full MFN duty | Verify REX registration in advance |
| 3 | Weak processing evidence | Retroactive denial after audit, plus penalties | Keep records at least three years |
| 4 | Wrong HS code | Wrong duty schedule; possible fines | Use a BTI ruling |
| 5 | Goods altered in a third country | Non-alteration rule broken; preference lost | Ship direct or under customs control |
The Timing Trap Deserves Extra Attention
The claim window is unforgiving. If your broker files the entry without the preference code and without the proof of origin, you have a short window — generally 30 days — to submit the document. Miss it, and the excess duty is gone. There is no later reimbursement route the way some other trade programs allow. We build the origin document check into our pre-shipment inspection stage precisely so the paperwork lands before the container does.
The Transit Trap
The non-alteration rule catches consolidators. If your stamping parts are repacked, relabeled, or further processed in a third country on the way to the EU, the preferential claim can fail. Simple transshipment under customs supervision is fine. Anything more is risk. When we manage door-to-door logistics for clients, we route Vietnam-origin cargo to avoid any handling that could raise questions.
The Sourcing Trap
Finally, watch the supply chain behind your supplier. If they quietly switch from forming raw coil to buying imported semi-finished blanks to cut cost, the origin status can flip mid-program without anyone updating the paperwork. Annual re-verification of the Rules of Origin position is cheap compared to a retroactive duty bill.
Conclusion
Full MFN duties on qualifying Vietnamese stampings are money left on the table. Verify origin, classify correctly, secure the EUR.1 or REX declaration, and claim at import — every time.
Frequently Asked Questions
What Documents Do I Need to Prove Vietnamese Origin for My Stamping Parts?
A buyer once asked me why his broker rejected a perfectly good invoice as proof of origin . Our sourcing team in Vietnam sees that confusion in almost every first-time EVFTA shipment.
How Do I Verify That My Vietnam Supplier Actually Qualifies for EVFTA Preferential Rates?
During a supplier audit near Hai Phong last year, we found a stamping shop buying pre-formed blanks from abroad and only doing final trimming. That part would never qualify.
Which Stamping Part HS Codes Should I Check Before Claiming EVFTA Tariff Reductions?
Classification arguments cost real money. We once spent two weeks with a client's broker debating whether a formed mounting clip belonged in Chapter 73 or Chapter 87. The duty gap was significant.
