Skip to main content

🇻🇳 178 profiles · Engineering review

Vietnam Manufacturing

How to Use Letters of Credit for Secure Sheet Metal Fabrication Sourcing from Vietnam?

July 7, 2026

Stamping press on the production floor at Nam Binh Phong Import Export Service Tradind Production, a DEWIN-audited Vietnamese factory

Secure sheet metal fabrication sourcing from Vietnam using Letters of Credit for payment protection

When our Singapore team helped a U.S. client source complex sheet metal brackets from Vietnam last year, the biggest worry wasn’t quality — it was payment security third-party pre-shipment inspection certificate 1. The buyer had been burned before by a supplier in another country who took a wire transfer and shipped defective parts. That experience left a scar. The fear of losing capital on a cross-border deal is real, and it gets worse when you add customs clearance Vietnam timelines, language barriers, and unfamiliar banking systems to the mix. Letters of credit 2 for secure sheet metal fabrication sourcing from Vietnam solve this exact problem by placing a trusted bank between buyer and seller.

Letters of credit for secure sheet metal fabrication sourcing from Vietnam work by having your bank guarantee payment to the Vietnamese supplier only after compliant shipping and inspection documents are presented, protecting your capital while assuring the supplier of payment upon verified shipment.

This article walks you through the practical steps, required documents, timeline management, and alternatives. Whether you are sourcing precision mounting brackets or complex multi-bend enclosures, the guidance below comes from real export-import documentation experience across our Vietnam and China offices.

How can I use a Letter of Credit to protect my capital when sourcing sheet metal from Vietnam?

A lesson we learned early on: trust alone does not protect a purchase order worth $50,000 or more. One of our U.S. clients once asked us to help restructure their payment terms after a supplier shipped parts two weeks late and short by 15%. That single incident cost them a production line shutdown. A documentary credit 3 — the formal term for a Letter of Credit — exists precisely to prevent this kind of loss.

You protect your capital by opening an irrevocable Letter of Credit through your bank, which releases payment to the Vietnamese fabricator only when the bank receives fully compliant documents proving goods were manufactured, inspected, and shipped according to your contract terms.

Protecting capital with an irrevocable Letter of Credit for Vietnam sheet metal sourcing transactions

How the LC Process Works Step by Step

The LC process involves at least three parties: the buyer (importer), the seller (exporter), and the issuing bank. Here is a simplified breakdown of each stage:

Step Action Who Is Responsible
1 Buyer requests issuing bank to open an LC based on contract terms Buyer + Issuing Bank
2 Issuing bank opens LC and sends it to advising bank in Vietnam Issuing Bank
3 Advising bank reviews LC and forwards to exporter Advising Bank
4 Exporter manufactures and ships goods per LC and contract Exporter
5 Exporter prepares shipping documents and submits to advising bank Exporter
6 Advising bank checks documents and presents to issuing bank Advising Bank
7 Issuing bank examines documents; if compliant, releases payment Issuing Bank
8 Advising bank credits exporter's account Advising Bank
9 Issuing bank delivers documents to importer for customs clearance Issuing Bank + Buyer

This process is strictly document-based. Banks examine documents, not the physical goods. That means every detail — goods description, quantity, weight, packaging, number of copies — must match the LC terms exactly. Even a minor discrepancy, such as a misspelled part number or an incorrect Incoterms 2020 reference 4, can trigger a payment delay or outright refusal.

Costs and Collateral You Should Expect

Banks charge issuance fees for LCs, and they typically require a margin deposit. This margin can range from 0% to 100% of the LC value, depending on your company's credit profile. For a first-time importer with limited banking history, expect the margin to be on the higher end.

Our experience working with purchasing managers in the U.S. shows that LC costs average between 1% and 3% of the transaction value. This is a real cost. But compared to a lost shipment or a defective batch of custom sheet metal parts, it is a small price for supply chain risk management 5.

When an LC Makes the Most Sense

Not every order needs an LC. For small repeat orders with a trusted Vietnamese manufacturer, open account terms or even a T/T (telegraphic transfer 6) with a deposit may be simpler and cheaper. But for high-value first-time transactions — say, a $30,000 order for precision-bent mounting brackets with tight tolerances — an LC is the smartest trade finance instrument you can use.

We often recommend a confirmed letter of credit 7 for new engagements. This adds a second bank's guarantee on top of the issuing bank's. It costs more, and some Vietnamese companies resist the added fees. But it gives the buyer a layer of protection that is hard to match with any other international payment method.

✔ An irrevocable LC cannot be changed or cancelled without agreement from all parties True
Once issued, an irrevocable Letter of Credit 8 binds the issuing bank to honor payment if compliant documents are presented. Neither the buyer nor the bank can unilaterally modify or cancel it.
✘ The bank inspects the physical goods before releasing LC payment False
Banks only examine documents, not the actual goods. Payment is based entirely on document compliance, which is why specifying the right inspection documents in your LC is critical.
Video: Sample metal parts from audited Vietnamese factories in the DEWIN network. (@dewintech)

What inspection documents should I require in my LC to guarantee my custom parts are right first time?

A buyer interaction last quarter drove this point home. A purchasing manager from Texas sent us a drawing for a pair of mirrored mounting brackets — heavy-duty sheet metal, multiple precise folds, pre-drilled holes, and weld joints. He asked, "How do I know the parts will match my drawing if I'm paying through an LC?" The answer lies in what documents you mandate inside the LC itself.

You should require a third-party pre-shipment inspection certificate, a material test report, a dimensional inspection report referencing your drawing, and a packing list — all named as mandatory documents in your LC — to ensure your custom sheet metal parts are right first time.

Mandatory inspection documents and material test reports for custom sheet metal quality assurance

Building Your Document Checklist

The documents you list in your LC are your quality gatekeepers. If the exporter cannot present them in full compliance, the bank will not release payment. This is where supplier due diligence starts — before production, not after.

Here is a recommended document checklist for sheet metal fabrication orders:

Document Purpose Who Issues It
Commercial Invoice Confirms goods description, quantity, unit price, total value Exporter
Packing List Details packaging, gross/net weight, carton markings Exporter
Bill of Lading (or Airway Bill) Proves goods were shipped per Incoterms 2020 terms Carrier
Certificate of Origin Confirms goods were manufactured in Vietnam (for import tariffs Vietnam) Chamber of Commerce or authorized body
Material Test Report 9 (MTR) Verifies raw material grade (e.g., ASTM A36, SUS304) Mill or accredited lab
Dimensional Inspection Report Confirms critical dimensions match buyer's drawing within tolerance Exporter QC or third-party inspector
Third-Party Pre-Shipment Inspection (PSI) Certificate Independent verification of quality and quantity before shipment Appointed inspection company (e.g., SGS, Bureau Veritas)

Why Third-Party Inspection Is Non-Negotiable

When we coordinate production at partner factories in Vietnam, our local team of seven employees conducts in-process checks. But for LC transactions, we strongly recommend an independent PSI. The reason is simple: the bank needs an unbiased document. An internal QC report from the fabricator carries less weight than a certificate from SGS or Bureau Veritas.

The PSI certificate should reference the buyer's drawing number, list the critical dimensions inspected, state the acceptance criteria, and record actual measurements. For sheet metal brackets with multiple bends and weld joints, we typically ask the inspector to verify bend angles, hole positions, weld integrity, and surface finish (e.g., powder-coated or sandblasted).

Avoid Over-Specifying the LC

One trap I have seen buyers fall into is loading the LC with excessive detail. Every extra clause increases the chance of a documentary discrepancy. Keep the goods description concise: part number, material, quantity, unit price, total value, and reference drawing number. Put the full technical specification in the purchase order or supply agreement — not the LC itself. This keeps the banking process clean while your inspection documents handle the quality verification.

Tying Quality to Payment

The beauty of this approach is that quality control and trade finance work together. If the parts fail inspection, the PSI certificate will reflect non-conformance. Without a compliant PSI certificate, the bank will not release payment. This alignment protects your capital and motivates the Vietnamese manufacturer to get it right the first time — which is exactly what our clients demand.

✔ Mandating a third-party PSI certificate in your LC ties payment directly to verified quality True
Because banks only release payment upon receipt of all compliant documents, a failed PSI means the inspection certificate will show non-conformance, blocking payment until the issue is resolved.
✘ Including more detail in the LC always leads to better quality outcomes False
Excessive LC detail increases the risk of documentary discrepancies, which delays payment for both parties. Quality specifications belong in the purchase order and inspection protocol, not the LC text.

How do I streamline the LC process with my Vietnam fabrication partner to avoid lead time issues?

A concrete trade-off we weigh on almost every project: speed versus security. LCs add paperwork and banking steps. A typical LC transaction can add one to two weeks to your overall timeline compared to a simple wire transfer. For purchasing managers who already struggle with delivery delays from Vietnamese manufacturers, this is a real concern. But with the right preparation, you can compress those extra days to near zero.

You streamline the LC process by aligning your LC terms with your fabricator's production schedule, pre-agreeing on document formats, using a local advising bank familiar with Vietnam export procedures, and submitting your LC application before production starts — not after.

Streamlining the Letter of Credit process with Vietnam fabrication partners to avoid lead times

Mapping the Timeline

The biggest time wasters in LC transactions are not the banking steps themselves — they are the gaps between steps. Here is a realistic timeline comparison:

Phase Without LC (T/T) With LC (Well-Managed) With LC (Poorly Managed)
Payment terms agreed Day 1 Day 1 Day 1
LC application submitted N/A Day 2–3 Day 10–14
LC issued and advised N/A Day 5–7 Day 18–21
Production starts Day 3 Day 7 Day 22
Production complete Day 23 Day 27 Day 42
Inspection + documents prepared Day 24–25 Day 28–30 Day 43–48
Documents submitted to bank N/A Day 30 Day 48
Payment released Day 3 (deposit) + Day 25 (balance) Day 37–40 Day 55–60

The difference between "well-managed" and "poorly managed" can be three to four weeks. That gap is entirely avoidable.

Three Practical Steps to Compress the Timeline

1. Submit your LC application early. Do not wait until the purchase order is finalized. As soon as you have a quotation accepted and key terms agreed, start the LC paperwork with your bank. Our team often prepares the draft LC terms in parallel with the engineering review so there is no dead time.

2. Pre-agree on document formats. Before the LC is issued, share the exact document list with your Vietnam fabrication partner. Confirm they can produce each document in the required format. For example, if your LC calls for a "Full Set of Clean On-Board Bills of Lading 10," make sure the shipping agent knows this before booking the vessel. Vietnamese engineers read technical drawings well and are familiar with JIS, GB, and ASTM standards, but commercial English in banking documents is a different skill. Use simple technical English and confirm understanding in writing.

3. Choose a local advising bank with Vietnam trade experience. Banks that regularly handle export-import documentation from Vietnam will process documents faster. They know the common discrepancy patterns and can advise the exporter proactively. This alone can save three to five business days compared to using a bank unfamiliar with Vietnamese trade finance practices.

Communication Is the Real Accelerator

In our experience exporting custom parts to the U.S. and Europe, the single biggest factor in on-time LC transactions is communication. Confirm everything in writing via email. Ask your fabrication partner about response times for quotations, revisions, mold-making, fabrication, and shipping. Plan your project schedule proactively around these milestones.

We also recommend showing commitment to a long-term partnership. Most Vietnamese fabricators prioritize long-term relationships. When they see a buyer investing in structured payment terms like an LC — rather than demanding 100% upfront or harsh penalty clauses — they respond with better service, faster turnaround, and proactive problem-solving.

Is a Letter of Credit my best option for securing high-quality sheet metal sourcing outside of China?

When we first expanded our sourcing operations into Vietnam seven years ago, many of our U.S. clients were moving away from Chinese suppliers because of tariff pressures and supply chain concentration risk. The first question they asked was not about quality or price — it was, "How do I pay safely?" The answer depends on the transaction size, the relationship maturity, and your risk tolerance.

A Letter of Credit is your best option for high-value or first-time sheet metal sourcing transactions outside of China because it provides bank-guaranteed payment security, enforces document compliance, and mitigates non-payment risk — though for smaller repeat orders, open account terms may be more efficient.

Letter of Credit providing bank-guaranteed security for high-value sheet metal sourcing outside China

Comparing International Payment Methods

Here is a side-by-side comparison of the most common international payment methods for custom parts sourcing:

Payment Method Security for Buyer Security for Seller Cost Best For
Letter of Credit (LC) High — payment tied to document compliance High — bank guarantee of payment 1%–3% of value + margin deposit High-value, first-time, or complex orders
Telegraphic Transfer (T/T) with deposit Medium — partial exposure on balance Medium — deposit received upfront Low — bank transfer fees only Established relationships, mid-value orders
Open Account (Net 60/90) High — pay after receiving goods Low — relies on buyer's creditworthiness Very low Long-term trusted partnerships
Documentary Collection (D/P or D/A) Medium — documents released upon payment or acceptance Medium — no bank guarantee Low to moderate Moderate-value orders with some trust
Cash in Advance Low — full payment before shipment Very high — no risk Very low Small samples or trial orders

Why Vietnam Stands Out for Sheet Metal Sourcing

Vietnam has emerged as a leading manufacturing hub for sheet metal fabrication. Average manufacturing wages are approximately $280 per month, compared to $4,000 in the U.S. The Vietnamese government offers corporate income tax exemptions for up to four years and a 50% tax reduction for up to nine additional years under the 2020 Investment Law. The country's strategic location in Southeast Asia provides proximity to major shipping routes.

Top fabricators in Vietnam — including companies like ATAD Steel Structure, Metalic Vietnam, and smaller specialized shops — are investing in CNC laser cutters, press brakes, and robotic welding. When we audit factories for our clients, we evaluate factory scale, machinery investment, quality control systems, engineering support, export experience, and on-time delivery capability. Platforms like Ensun and Yellowpage Vietnam can help buyers research and verify feedback from previous clients.

When to Use an LC — and When Not To

For a first-time engagement with a Vietnamese sheet metal fabricator, especially one involving complex parts like mirrored brackets with multiple bends, weld joints, and tight-tolerance mounting holes, an LC is the safest choice. It enforces discipline on both sides. The buyer knows payment will not leave their bank until documents are verified. The seller knows payment is guaranteed once they comply.

But LCs are expensive, time-consuming, and require extensive paperwork. For repeat orders with a trusted partner — where you have already validated quality, delivery, and communication — open account terms (net 60 or 90 days) may be the better option. At our company, we offer open account payment terms to qualified clients precisely because we understand that cash flow pressure is a real barrier for purchasing managers managing multiple sourcing projects across Asia. For guidance on structuring payment terms to minimize risk, we recommend evaluating your supplier relationship maturity alongside transaction value.

Currency Risk and Hedging

One often-overlooked dimension of LC transactions is currency risk. If your LC is denominated in USD but the Vietnamese fabricator's costs are in Vietnamese Dong, exchange rate fluctuations can affect pricing over time. For long-term sourcing agreements, consider implementing forward contracts or other currency hedging strategies alongside your LC to lock in rates and protect margins.

ESG and Sustainability Considerations

A growing number of U.S. and European buyers are integrating Environmental, Social, and Governance compliance into their sourcing requirements. You can embed ESG clauses directly into your LC terms — for example, requiring a certificate of compliance with specific labor standards or environmental regulations as a mandatory document for payment. This approach turns the LC from a pure financial instrument into a broader supply chain risk management tool.

✔ LCs are most cost-effective for high-value, first-time transactions where trust has not yet been established True
The 1%–3% cost of an LC is justified when the transaction value is high and the buyer has no track record with the supplier. The bank guarantee eliminates the risk of total capital loss.
✘ An LC guarantees the physical quality of the goods you receive False
An LC is a document-based instrument. Banks verify paperwork, not products. To guarantee quality, you must mandate specific inspection documents — like a third-party PSI certificate — within the LC terms.

Conclusion

Letters of credit remain one of the most reliable trade finance tools for sourcing custom sheet metal parts from Vietnam. By structuring your LC with the right inspection documents, aligning timelines with your fabrication partner, and choosing the appropriate payment method for each transaction's risk profile, you protect your capital and build a foundation for long-term, high-quality sourcing success. Buyers should also understand how to manage tax invoices and financial compliance as part of the broader documentation framework, and consider whether FOB or CIF is the right Incoterms choice to align with their LC requirements.

Frequently Asked Questions

How can I use a Letter of Credit to protect my capital when sourcing sheet metal from Vietnam?

A lesson we learned early on: trust alone does not protect a purchase order worth $50,000 or more. One of our U.S. clients once asked us to help restructure their payment terms after a supplier shipped parts two weeks late and short by 15%. That single incident cost them a production line shutdown. A documentary credit 3 — the formal term for a Letter of Credit — exists precisely to prevent this kind of loss.

What inspection documents should I require in my LC to guarantee my custom parts are right first time?

A buyer interaction last quarter drove this point home. A purchasing manager from Texas sent us a drawing for a pair of mirrored mounting brackets — heavy-duty sheet metal, multiple precise folds, pre-drilled holes, and weld joints. He asked, "How do I know the parts will match my drawing if I'm paying through an LC?" The answer lies in what documents you mandate inside the LC itself.

How do I streamline the LC process with my Vietnam fabrication partner to avoid lead time issues?

A concrete trade-off we weigh on almost every project: speed versus security. LCs add paperwork and banking steps. A typical LC transaction can add one to two weeks to your overall timeline compared to a simple wire transfer. For purchasing managers who already struggle with delivery delays from Vietnamese manufacturers, this is a real concern. But with the right preparation, you can compress those extra days to near zero.

Footnotes


1. Explains the definition and purpose of a pre-shipment inspection certificate in trade. ↩︎


2. Explains letters of credit and their use in international trade. ↩︎


3. Defines documentary credit as an alternative term for a letter of credit. ↩︎


4. Provides official information and rules for Incoterms 2020, essential for international trade. ↩︎


5. Explains the importance and goals of supply chain risk management. ↩︎


6. Defines telegraphic transfer (TT) and explains its function in international payments. ↩︎


7. Details the definition, features, and benefits of a confirmed letter of credit. ↩︎


8. Explains the meaning, benefits, and working of an irrevocable letter of credit. ↩︎


9. Explains what a Material Test Report is and its purpose in quality assurance. ↩︎


10. Provides a legal definition and explanation of a bill of lading in transportation. ↩︎

Manufacturing RFQ

Have a STEP Model or 2D Drawing for This Project?

Share your drawing, material, quantity and finishing requirements to begin a manufacturing quote. Confirm pricing, delivery and inspection requirements during the review.

Upload CAD & Get Quote →

This article is part of DEWIN's technical manufacturing engineering knowledge base. Factory-specific details come from each factory's profile page — please verify current information there or with our team.

Quick Sourcing Inquiry