A single non-conforming stamped bracket once cost one of our clients a six-month production delay and a painful recall investigation — all because they never verified their supplier’s stamping qualifications beyond a certificate PDF.
To verify a supplier’s aerospace or medical stamping qualifications, you must cross-reference their AS9100 certification or ISO 13485 compliance in official databases, confirm NADCAP accreditation scope for special processes, review First Article Inspection reports and material traceability records, and conduct a thorough on-site supplier quality audit.
This guide walks through the exact steps we use at DEWIN when qualifying stamping suppliers across Asia for our U.S. and European clients. Each step matters. Skipping one can expose your supply chain to serious risk. Let us break it down.
How can I confirm a supplier's aerospace or medical certifications are genuine and current?
Last year, our team in Vietnam flagged a stamping supplier whose AS9100 certificate 1 looked perfect on paper — correct logo, proper revision, right registrar name. But a five-minute check on the SAE OASIS database 2 revealed the certificate had been suspended three months earlier. That one database search saved our client from onboarding a disqualified supplier.
To confirm certifications are genuine, verify AS9100 certification status on the SAE OASIS database for aerospace and check ISO 13485 compliance through IAF CertSearch for medical. Confirm the certificate is active, not expired or suspended, and that the scope specifically covers metal stamping processes.

Understanding the Certification Baseline
For aerospace stamping, the absolute minimum is AS9100D (Revision D). This standard builds on ISO 9001 but adds aerospace-specific requirements. It mandates risk management, counterfeit part prevention, and safety criticality controls. Without it, a supplier simply cannot participate in aerospace supply chains.
For medical device stamping, ISO 13485 3 is the gold standard. Some suppliers hold only ISO 9001 and claim it is "close enough." It is not. ISO 13485 requires design controls, risk management aligned with ISO 14971, and a product lifecycle approach that ISO 9001 does not demand. If your stamped parts go into an FDA-regulated device, ISO 9001 alone will likely fail an FDA audit.
For defense-related stamping, ITAR registration 4 is a separate legal requirement. A supplier can hold every quality certification and still be non-compliant if they handle defense technical data without proper ITAR registration.
How to Perform the Database Check
Here is the verification process we follow for every new stamping supplier:
| Step | Aerospace (AS9100D) | Medical (ISO 13485) |
|---|---|---|
| 1. Obtain certificate copy | Request scanned copy with registrar name, cert number, expiry date | Same — request full certificate with scope statement |
| 2. Database verification | Check SAE OASIS (oasis.sae.org) using supplier name or cert number | Check IAF CertSearch (www.iafcertsearch.org) |
| 3. Verify status | Must show "Active" — not "Suspended" or "Withdrawn" | Must show valid and current |
| 4. Verify scope | Scope must list "stamping," "metal forming," or specific process language | Scope must reference medical device components or relevant processes |
| 5. Verify site | Certificate must cover the specific manufacturing site, not just HQ | Same — site-specific verification is critical |
Red Flags to Watch For
A certificate that lists only "machining" does not cover stamping. This scope mismatch is more common than you would think. We once reviewed a supplier who had AS9100 certification for their machining division. Their stamping line operated in a different building with no certification coverage at all.
Also watch for certificates from unaccredited registrars. The registrar itself must be accredited by a recognized accreditation body. If the registrar name does not appear in IAF databases, the certificate has no value.
An expired certificate is an immediate disqualifier. No exceptions. Even if the supplier says renewal is "in progress," you cannot ship aerospace or medical parts from an uncertified facility.
What documentation should I request to verify a stamping supplier's quality management system?
One trade-off we constantly weigh during supplier qualification is speed versus thoroughness. A client needs parts fast. The supplier promises they can deliver. But rushing past the document review — what auditors call the "paper audit" — is where costly mistakes begin.
You should request the supplier's quality manual, process flow diagrams, calibration records traceable to ISO/IEC 17025, AS9102 First Article Inspection reports, material test reports with heat and lot traceability, statistical process control data showing Cpk values, and a documented corrective and preventive action (CAPA) history.
/ICHI-%20Photo/150-ton%20Stamping%20Press%20Machine%201.jpg)
The Paper Audit: Your First Line of Defense
Before booking a flight for an on-site visit, the document review tells you whether a supplier is even worth visiting. We call this the forensic paper audit. Here is what to request and why each document matters.
Critical Documents Checklist
| Document | What It Proves | What to Look For |
|---|---|---|
| Quality Manual & Process Flows | The supplier has a documented system for your part family | Specific stamping process mapping, not generic flowcharts |
| AS9102 First Article Inspection Reports (FAIRs) | Ability to measure and document to aerospace or medical tolerances | Complete balloon drawings, measured dimensions, pass/fail results |
| Material Test Reports (Mill Certs) | Raw material meets AMS or ASTM specifications | Chemical composition, mechanical properties, heat/lot number traceability |
| Calibration Records | Measurement equipment is accurate | Traceable to ISO/IEC 17025 accredited labs, current dates |
| Control Plans & SPC Data | Process is statistically capable | Cpk ≥ 1.33 (standard) or ≥ 1.67 (critical features) |
| CAPA Logs | Problem-solving maturity and continuous improvement | Root cause depth, corrective action 5 effectiveness, recurrence data |
| Operator Training Records | Personnel competency | Role-specific training, revision tracked, approval signatures |
Deep Dive into Key Documents
First Article Inspection Reports deserve special attention. An AS9102 FAIR is not a simple dimensional check. It is a comprehensive verification that every drawing requirement — dimensions, materials, surface finishes 6, special processes — has been measured and documented on the very first production run. If a supplier cannot produce a complete FAIR for a comparable part, they are not ready for tight tolerance metal forming in aerospace or medical applications.
Material Test Reports must trace back to original mill certifications. Every stamped part should link to a specific heat number and lot number. When we audit stamping suppliers in Asia for our U.S. clients, we trace the chain from finished part to raw coil. If there is a gap anywhere, that is a traceability failure.
Statistical Process Control (SPC) data reveals whether a stamping process is stable. We look for Cpk values. For standard features, a Cpk of 1.33 or higher is typical. For critical characteristics in aerospace or medical parts, many primes require 1.67 or higher. An Acceptable Quality Level (AQL) of 0.65 to 1.0 is common for critical stamped features.
CAPA history is often overlooked. But it tells you more about a supplier's real quality culture than any certificate. Review how they handle nonconformances. Do they get to root cause? Do problems recur? A mature CAPA system is a strong indicator of process validation protocols working as intended.
Process-Specific Records
For stamping specifically, go beyond generic quality records. Request data on press tonnage, stroke rate, die sets used, and any heat-treat cycles including temperature, time, and atmosphere. These process parameters directly affect part quality. If a supplier cannot provide them, their process control is insufficient.
How do I assess a supplier's process controls and traceability for aerospace or medical parts?
A buyer we work with in the Midwest once told me about a stamping supplier who delivered 50,000 brackets with the right dimensions but the wrong alloy. The parts looked identical. They measured correctly. But the material test reports did not match the specification. Without end-to-end traceability, that mistake would have reached the assembly line — and potentially an aircraft.
Assess process controls by verifying NADCAP accreditation for special processes, reviewing real-time SPC data and Cpk capability studies, inspecting tooling lifecycle management programs, and confirming lot-level traceability from raw material coil through every work center to the finished stamped part.

The NADCAP Gap: Why Certification Is Not Enough
This is a critical concept that many procurement teams miss. AS9100 certification covers the quality management system. It tells you the supplier has procedures, document control, and management review. But it does not validate the technical execution of special processes.
NADCAP accreditation fills this gap. It is administered by the Performance Review Institute (PRI) and covers specific processes like heat treating, chemical processing, non-destructive testing (NDT), welding, coatings, and more.
Here is the crucial detail: NADCAP accreditation is process-specific. A supplier accredited for welding is not accredited for heat treatment. You must verify the exact scope of their accreditation against the processes your parts require.
For medical stamping, there is no direct NADCAP equivalent. Instead, verify compliance with relevant ASTM or AMS 7 material processing standards. For parts contacting the body, ISO 10993 biocompatibility testing data may be required.
Traceability: From Coil to Finished Part
Traceability in aerospace and medical stamping means every single part can be traced back to:
- The specific raw material coil and its mill certification
- The heat and lot number
- The stamping press, die set, and operator who ran the job
- Any secondary process (heat treat, plating, NDT) with batch records
- The final inspection results and shipping records
We check this chain at every supplier quality audit. A break anywhere in the chain is a nonconformance. For medical devices, FDA regulations under 21 CFR Part 820 make this traceability legally mandatory.
Tooling Lifecycle Management
Die wear is a silent quality killer in high-volume stamping. Over thousands of hits, a die gradually degrades. Dimensional drift follows. Without a Tooling Lifecycle Management (TLM) program, a supplier may not catch the drift until parts are out of tolerance.
What to look for in a TLM program:
- Digital tracking of die hit counts
- Scheduled preventive maintenance intervals
- Dimensional trend data correlated with die condition
- Clear criteria for die refurbishment or replacement
Real-Time SPC and Process Monitoring
The industry is shifting from manual inspection logs to real-time Statistical Process Control software. Modern systems provide automated alerts when a process drifts outside control limits. This catches problems before they produce scrap.
During our audits, we look at the actual SPC screens on the shop floor — not just summary reports generated for the audit. If operators cannot explain the control charts at their stations, the system is likely not being used in practice.
| Process Control Element | What to Verify | Red Flag |
|---|---|---|
| NADCAP Accreditation | Scope matches required special processes | Accredited for wrong process or expired |
| SPC Software | Real-time monitoring with automated alerts | Manual-only logs, no trend analysis |
| Tooling Management | Digital die tracking with PM schedules | No hit-count records, reactive-only maintenance |
| Material Traceability | Lot/heat number at every work center | Gaps between receiving and finished goods |
| Operator Controls | Documented work instructions at each station | Generic instructions, not part-specific |
Environmental Controls for Medical Stamping
For medical stamped components, environmental controls add another layer. Some parts require ISO Class 7 8 or 8 cleanroom conditions during stamping and degreasing. Bio-burden contamination can render parts unusable. Verify the supplier's cleanroom protocols, gowning procedures, and environmental monitoring data. Packaging for corrosion protection and contamination control must also be validated.
Should I conduct an on-site audit before qualifying a new aerospace or medical stamping supplier?
The short answer from our experience managing supplier qualifications across Vietnam, China, and other Asian manufacturing hubs: yes, always. Every time we have skipped an on-site audit to save time, we have regretted it. The gap between what suppliers document and what actually happens on the shop floor can be significant.
Yes, an on-site audit is essential before qualifying any new aerospace or medical stamping supplier. It reveals whether documented procedures match actual shop-floor execution, validates operator competency and inspection capabilities, and confirms that traceability, calibration, and special process controls function as claimed.

What the Paper Audit Cannot Tell You
Documents can look perfect. Process flows can be beautifully formatted. Calibration certificates can show current dates. But none of that tells you whether the operator at press station 3 actually follows the documented setup procedure. Only an on-site audit reveals the truth.
Our audit teams use a structured supplier quality audit checklist, but they also look beyond the checklist. They observe. They ask questions. They follow a part from raw material to shipping dock.
What to Look For on the Shop Floor
Operator Competency: Review training records, but also observe operators at work. Can they explain the control plan for the part they are running? Do they know the critical dimensions? Are the work instructions at their station the current revision?
Inspection Equipment: Walk through the quality lab. Examine CMM (Coordinate Measuring Machine) setups. Check fixture design. Are gages calibrated and within their due dates? We once found a supplier using an expired caliper set to inspect critical aerospace dimensions. The calibration sticker had been peeled off.
Process Execution: Watch the stamping press run. Is the setup matching the documented parameters — tonnage, speed, feed rate? Check heat-treat furnaces. Are they running the specific temperature cycles documented in the process records? We look at furnace data recorders, not just the operator's log sheet.
Traceability in Action: Pick a part off the line. Ask the supplier to trace it back to its raw material heat number. If they cannot do it in minutes, their traceability system has gaps.
The Audit Workflow
Here is the step-by-step verification workflow we follow at DEWIN when qualifying stamping suppliers for our clients:
- Database Check — Verify AS9100 certification or ISO 13485 compliance on OASIS or IAF CertSearch. Confirm ITAR registration if defense work is involved.
- Scope Verification — Confirm NADCAP accreditation covers the specific special processes required. Confirm certification scope includes stamping.
- Document Request — Collect and review quality manual, FAIRs, material test reports, SPC data, calibration records, CAPA history.
- On-Site Audit — Evaluate shop floor execution, operator competency, inspection capabilities, traceability systems, and environmental controls.
- Production Intent Run & Final FAI — Run a trial production batch. Complete a full First Article Inspection to AS9102 or equivalent. Validate Cpk on critical features.
- Continuous Monitoring — Establish monthly or quarterly scorecards tracking on-time delivery, PPM defect rates, and first-pass yield.
Cybersecurity and Data Protection
This is an emerging requirement that many suppliers are not prepared for. If your stamped parts involve Controlled Unclassified Information (CUI) or Department of Defense work, the supplier must demonstrate NIST SP 800-171 9 compliance and adherence to DFARS clauses. The Cybersecurity Maturity Model Certification 10 (CMMC) framework is becoming increasingly important. Check if the supplier has submitted a self-assessment to the Supplier Performance Risk System (SPRS).
Even for non-defense medical work, protecting proprietary design files is critical. Ask about the supplier's data security policies, network segmentation, and access controls for sensitive CAD files and process data.
The Cost-Benefit Reality
On-site audits are expensive. Travel costs, auditor time, and schedule disruption add up. For a supplier in Southeast Asia, a single audit trip can cost thousands of dollars and a full week of time.
But the cost of qualifying a bad supplier is far higher. A single lot of non-conforming aerospace parts can trigger a customer escape, a formal corrective action, and potential loss of the program. For medical devices, the consequences include FDA warning letters, product recalls, and patient safety risk.
Our approach is practical. We invest the audit resources upfront. We build the relationship with the supplier on transparency. And we follow up with periodic re-audits and continuous performance monitoring. That investment pays for itself many times over.
Understanding what standards apply when procuring aerospace stamping parts is equally important, as it provides the regulatory framework against which all supplier qualifications should be measured.
Conclusion
Verifying a supplier's aerospace or medical stamping qualifications demands more than collecting certificates. It requires database checks, scope analysis, forensic document review, and hands-on shop-floor audits. At DEWIN, this disciplined approach protects our clients from costly quality failures and keeps their supply chains compliant.
Frequently Asked Questions
How can I confirm a supplier's aerospace or medical certifications are genuine and current?
Last year, our team in Vietnam flagged a stamping supplier whose AS9100 certificate 1 looked perfect on paper — correct logo, proper revision, right registrar name. But a five-minute check on the SAE OASIS database 2 revealed the certificate had been suspended three months earlier. That one database search saved our client from onboarding a disqualified supplier.
What documentation should I request to verify a stamping supplier's quality management system?
One trade-off we constantly weigh during supplier qualification is speed versus thoroughness. A client needs parts fast. The supplier promises they can deliver. But rushing past the document review — what auditors call the "paper audit" — is where costly mistakes begin.
How do I assess a supplier's process controls and traceability for aerospace or medical parts?
A buyer we work with in the Midwest once told me about a stamping supplier who delivered 50,000 brackets with the right dimensions but the wrong alloy. The parts looked identical. They measured correctly. But the material test reports did not match the specification. Without end-to-end traceability, that mistake would have reached the assembly line — and potentially an aircraft.
Footnotes
1. Standard for quality management systems in the aerospace industry. ↩︎
2. Official database for verifying aerospace quality management system certifications. ↩︎
3. Primary international standard for medical device quality management systems. ↩︎
4. Mandatory U.S. government requirement for handling defense-related technical data. ↩︎
5. Process of identifying and eliminating the causes of nonconformities. ↩︎
6. Technical term for the texture and quality of a part’s exterior. ↩︎
7. Organizations that develop technical standards for materials and testing. ↩︎
8. International standard for cleanroom air cleanliness levels in manufacturing. ↩︎
9. Federal standard for protecting sensitive information in non-federal systems. ↩︎
10. Department of Defense program to verify cybersecurity practices of contractors. ↩︎
