The main steps of the powder metallurgy process are raw material mixing, pressing, sintering and post-processing. Among them, sintering is the most important and critical step in the powder metallurgy process. Why?
In the production of powder metallurgy products, the sintering process is a key step in converting the product from a blank to a semi-finished product, and then it is post-processed to form a finished product. Powder metallurgy production has the advantage of a short production period, but it also creates the disadvantage of unstable structure.
Through the sintering process, during the high-temperature heating process, we can further increase the strength and density of the product structure and improve the stability of the physical properties of the product.
Will the product deform after sintering? Will the product reduce porosity after sintering? Will the product change density after sintering? For such problems, we can deeply check the quality of the products in the sintering process.
/Changzhi%20%20-%20Photo/Atmosphere%20furnace.jpg)
Therefore, it can be found that the sintering process actually plays an important role in the entire powder metallurgy process. Through sintering, the product performance can be further improved, and the necessary strength can be provided for post-processing. The importance of the sintering process is also evident.
.jpg)
Precision Manufacturing & Sourcing Specification Matrix
| Technical Dimension | Standard Commercial Grade | High-Precision OEM Export Grade | DEWIN Verification Protocol |
|---|---|---|---|
| Machining & Forming Tolerance | ISO 2768-m (±0.10 mm nominal) | ISO 2768-f (±0.01 mm – ±0.025 mm critical bores) | Calibrated 3D CMM & Air/Pin Gauging |
| Surface Roughness & Finish | Ra 1.6 – 3.2 µm as-machined / standard coat | Ra 0.4 – 0.8 µm precision ground / MIL-A-8625 anodized | Profilometer & Coating Thickness Gauge |
| Material & Alloy Certification | Supplier Mill Test Report (MTR) | Independent OES chemical & mechanical verification | EN 10204 3.1 + RoHS/REACH Compliance |
| Batch Inspection & Packaging | ISO 2859-1 (AQL 1.0 Major / 2.5 Minor) | Zero-defect critical features + VCI export crating | Pre-Shipment Inspection (PSI) Report |
Frequently Asked Questions
What engineering files are required to quote importance of sintering process in powder metallurgy process with DEWIN?
Provide 3D CAD models (STEP or IGES) along with 2D engineering drawings (PDF/DXF) specifying critical-to-quality (CTQ) tolerances, material grade, surface finish, and annual volume.
How does DEWIN verify dimensional accuracy and material compliance before shipment?
Every production lot undergoes incoming material spectrometer verification (EN 10204 3.1), First Article Inspection (FAI) via 2D/3D coordinate measuring machines (CMM), and AQL pre-shipment audits.
Can DEWIN support both low-volume prototype validation and mass production scaling in Vietnam and China?
Yes. DEWIN coordinates rapid CNC and bridge-tooling prototypes alongside high-tonnage production tooling across audited ISO 9001 and IATF 16949 partner factories in Vietnam and China.
