Last quarter, a long-standing U.S. client asked our team to quote a set of steel mounting brackets from Vietnam — then panicked when a freight forwarder mentioned possible anti-dumping duties exceeding 400%.
U.S. anti-dumping and countervailing duties on stamping parts from Vietnam do not exist as a standalone order. However, stamping parts made from certain steel substrates — especially corrosion-resistant or cold-rolled steel originating in China, Korea, or Taiwan — may be caught by circumvention rulings with combined duty rates reaching 456% or higher.
That gap between “no specific order” and “potentially catastrophic duties” is exactly where importers get hurt. Below, I break down the risks, the rates, and the steps you can take right now to protect your supply chain.
How Do I Know If My Stamping Parts Are Subject to AD/CVD Duties from Vietnam?
One lesson we learned early at our Vietnam office is that the product name on your purchase order matters far less than the material it is made from and the Harmonized Tariff Schedule classification it receives at the U.S. border.
Your stamping parts are subject to AD/CVD duties if they fall within the "scope of merchandise" of an active Department of Commerce order — even if the order never mentions "stamping parts" by name. Check the steel substrate, the HTS code, and any circumvention rulings that cover minor processing in Vietnam.
/ICHI-%20Photo/150-ton%20Stamping%20Press%20Machine%201.jpg)
Why "Stamping Parts" Is Not a Listed Category
The Department of Commerce 1 does not issue trade remedy orders by manufacturing process. It issues them by product type and material. So you will never find an order titled "Stamping Parts from Vietnam." Instead, you will find orders on corrosion-resistant steel (CORE), cold-rolled steel (CRS), chassis and chassis subassemblies 2, steel nails, and stainless steel mechanical tubing. If your stamped bracket, mount, or plate is made from one of those covered materials, the order may apply to you.
The Scope of Merchandise Test
Every AD/CVD order contains a "Scope of Merchandise" section. This section describes, in precise language, which products are covered. It lists physical characteristics, dimensions, coatings, end uses, and HTS subheadings. When your stamping part enters the United States, Customs and Border Protection 3 (CBP) compares your entry data against every active scope. If your part matches, duties apply — regardless of what you call the part on your commercial invoice.
Here is a simplified look at active orders and investigations that could overlap with stamping parts:
| Active Order / Investigation | HTS Code Area | Relevance to Stamping Parts | Current Status |
|---|---|---|---|
| Corrosion-Resistant Steel (CORE) | 7210, 7212, 7225, 7226 | High — stamped parts made from galvanized or coated steel | AD investigation initiated Sept 2024; alleged dumping margin 195.23% |
| Chassis and Chassis Subassemblies | 8716 | High — stamped automotive/trailer chassis components | Preliminary AD rate 511.16% |
| Cold-Rolled Steel (CRS) | 7209, 7211, 7225, 7226 | Medium — stamped parts from uncoated cold-rolled sheet | Circumvention ruling active |
| Steel Nails | 7317 | Low — only if your stamped product is classified as a nail or fastener | Under administrative review 2024–2025 |
| Stainless Steel Mechanical Tubing | 7304, 7306 | Low — only if tubing is a component of your stamped assembly | Under administrative review 2024–2025 |
How to Run the Check Yourself
- Identify your HTS code. Work with a licensed customs broker to confirm the correct 10-digit HTS classification 4.
- Search the Department of Commerce's AD/CVD orders database. Filter by country (Vietnam) and by HTS chapter.
- Read every matching scope paragraph. Compare your product's physical description against the scope language.
- Request a scope ruling if uncertain. The Department of Commerce allows importers to formally ask whether their specific product is covered.
Our team in Vietnam runs this check on every new part before we quote. It adds a day or two to the quotation process, but it saves our clients from six-figure liability surprises down the line.
What Duty Rates Should I Expect When Sourcing Stamping Parts from Vietnam?
When we began helping clients shift sourcing from China to Vietnam around 2019, the assumption was simple: Vietnam means lower tariffs. That assumption is no longer safe for steel-based products.
Duty rates on steel-based stamping parts from Vietnam range from 0% (if no order applies) to over 500% in extreme cases. The most common risk band sits between 195% and 456%, driven by circumvention rulings on steel processed in Vietnam using Chinese, Korean, or Taiwanese substrate.

The Rate Landscape at a Glance
The table below summarizes the duty rates and margins that could apply to stamping parts, depending on their material and classification.
| Product / Ruling | Duty Type | Rate or Alleged Margin | Applies If… |
|---|---|---|---|
| Circumvention — CORE/CRS via Korea/Taiwan substrate | AD + CVD combined | Up to 456.23% | Your Vietnamese supplier uses Korean or Taiwanese steel that was originally subject to AD/CVD orders |
| Chassis and Chassis Subassemblies | Preliminary AD | 511.16% | Your stamped part is classified as a trailer chassis component |
| Corrosion-Resistant Steel (CORE) direct from Vietnam | Alleged AD | 195.23% | Your stamped part is made from Vietnamese-produced CORE steel |
| No applicable order | AD/CVD | 0% | Your part uses aluminum, stainless steel, or other non-covered material |
Understanding the Circumvention Premium
The 456.23% rate deserves special attention. It comes from a final circumvention determination by the Department of Commerce. The ruling found that steel coils from Korea and Taiwan were being shipped to Vietnam for minor processing — such as cutting, stamping, or coating — and then exported to the United States as "Vietnamese" products. The Department of Commerce ruled this was circumvention. Now, any product caught in this pattern inherits the original dumping margin plus the countervailable subsidies rate from the source country.
For our clients sourcing stamped brackets and mounting hardware, this means one critical question: where does your supplier's steel come from? If the answer is Korea, Taiwan, or China, and the processing in Vietnam is limited to stamping and finishing, the circumvention risk is real.
How Rates Stack Up
Keep in mind that AD/CVD duties are added on top of normal import duties. A stamped steel bracket might carry a standard HTS duty of 2.5%, plus a Section 232 steel tariff 5 of 25%, plus an AD duty of 195%, plus a CVD duty that has not yet been announced for CORE but could add another 10–50%. These layers compound fast.
Preliminary vs. Final Rates
The 511.16% rate on chassis subassemblies is preliminary. The International Trade Commission still needs to make a final material injury determination. If the ITC finds no injury, the order dies. If it confirms injury, the rate becomes final — and it can be adjusted upward or downward. During the preliminary phase, importers must post cash deposits at the preliminary rate for every entry. Those deposits are not refunded quickly even if the final rate drops.
How Can I Avoid Unexpected AD/CVD Costs When Importing Stamping Parts?
A buyer I work with once received a retroactive duty bill of $87,000 on a shipment of stamped steel mounts. The entries had been made during a trade remedy investigation window he did not know existed. That experience shaped how our team now manages every Vietnam-sourced metal project.
You can avoid unexpected AD/CVD costs by auditing your supplier's steel substrate origin, confirming HTS classifications before shipping, monitoring active Department of Commerce investigations, and requiring mill test certificates that trace raw material back to its country of melt and pour.
/12-05-2025-Pictures%20-%20Name/Hydraulic%20press%201.jpg)
Step 1: Audit the Supply Chain for Substrate Origin
The single most important action is to verify where the steel comes from. Ask your Vietnamese supplier for the mill test certificate (MTC) for every coil or sheet used in your stamping parts. The MTC shows the country of melt, pour, and primary rolling. If the steel originates in China, Korea, or Taiwan, your stamping part is at elevated circumvention risk.
At our Vietnam facility, we maintain a substrate origin log for every project. When we onboard a new stamping supplier, our local team physically inspects the raw material storage area and cross-references MTCs with purchase records. This is not optional — it is a fundamental supply chain control.
Step 2: Lock Down the HTS Classification Early
Do not wait until goods reach U.S. customs to find out what HTS code applies. Engage a licensed customs broker or trade attorney to issue a classification opinion before production starts. If there is any ambiguity, consider requesting a binding ruling from CBP. A binding ruling gives you legal certainty that your product is or is not within the scope of an AD/CVD order.
Step 3: Monitor Active Investigations and Administrative Reviews
The Department of Commerce publishes Federal Register notices 6 for every new trade remedy investigation, every preliminary determination, and every administrative review. Set up alerts or subscribe to a trade compliance monitoring service. Key events to watch:
- New petitions filed by U.S. domestic industries
- Initiation of investigations
- Preliminary affirmative determinations (this is when cash deposit requirements begin)
- Final determinations by the International Trade Commission
- Circumvention inquiries
- Administrative review results that change duty rates
Step 4: Understand the "Substantial Transformation" Standard
CBP applies a "substantial transformation 7" test to determine the country of origin for duty purposes. If your stamping operation in Vietnam takes a Chinese steel coil and merely cuts and bends it into a bracket, CBP may rule that the country of origin is still China — meaning the China-specific AD/CVD rates apply. The stamping must change the product's name, character, and use to qualify as a Vietnamese-origin product.
| Action in Vietnam | Likely Substantial Transformation? | Risk Level |
|---|---|---|
| Slitting coil into strips only | No | Very High |
| Stamping a flat blank into a formed bracket | Possibly — depends on complexity | Medium to High |
| Stamping + welding multiple components + powder coating + assembly | More likely yes | Lower |
| Full fabrication from Vietnamese-sourced raw material | Yes | Low |
Step 5: Use a Sourcing Partner with Local Presence
This is where our value proposition becomes directly relevant. Having a team on the ground in Vietnam — seven people in our case — means we can physically verify supplier claims, inspect raw material origins, and catch problems before they become costly customs disputes. Remote sourcing from the United States leaves too many gaps.
What Steps Should I Take to Stay Compliant with U.S. Trade Regulations on Vietnam-Made Parts?
During a recent supplier audit in Ho Chi Minh City, we discovered that a stamping factory was purchasing cold-rolled steel from a trader who could not confirm the original country of melt. We paused the project and sourced a traceable alternative. That kind of proactive compliance is what separates smooth imports from regulatory nightmares.
To stay compliant, maintain documented records of steel origin, classify products accurately under the Harmonized Tariff Schedule, post required cash deposits on time, participate in scope ruling requests when needed, and work with a customs broker who specializes in AD/CVD matters.

Build a Compliance File for Every Part Number
Every stamping part you import from Vietnam should have a compliance file that includes:
- The HTS classification and the rationale for it
- Mill test certificates showing country of melt and pour
- The supplier's declaration of origin
- A copy of the relevant AD/CVD scope language with your analysis of whether the part is covered
- Any binding rulings or scope rulings from CBP or the Department of Commerce
- Cash deposit payment records if applicable
This file is your defense if CBP audits your entries — which is increasingly common. U.S. authorities are deploying advanced data analytics to flag anomalous spikes in Vietnamese exports that do not match the country's known raw material import volumes. If your import volumes spike without a matching increase in Vietnamese steel production, expect questions.
Respond to Administrative Reviews
The Department of Commerce conducts periodic administrative reviews 8 of existing AD/CVD orders. During these reviews, duty rates can change — sometimes dramatically. If you are importing a product under an active order, you have the right to register as an interested party and submit information. Vietnam's Trade Remedies Authority also encourages stakeholders to participate within 30 days of announcement. Ignoring these reviews means you accept whatever rate the Department of Commerce assigns, which is often the highest available rate.
Watch for "Follow-the-Move" Petitions
U.S. domestic industries have adopted a strategy of filing simultaneous petitions against multiple Southeast Asian countries. The goal is to prevent importers from simply shifting production from one country to another to avoid duties. If you source stamping parts from Vietnam today and plan to move to Thailand or Indonesia tomorrow, be aware that petitions may follow you. The only sustainable defense is genuine, traceable, compliant production — not geographic arbitrage.
Understand Emerging Risks
Two emerging trends are worth tracking:
- Carbon-linked trade remedies. There is growing discussion in U.S. trade policy circles about treating Vietnam's reliance on coal-based energy for steel processing as a countervailable subsidy. This is not law yet, but it signals a direction.
- Stricter substantial transformation standards. CBP is applying more rigorous tests to determine if stamping steel in Vietnam constitutes enough transformation to change the country of origin. What passed five years ago may not pass today.
The Non-Market Economy Factor
The United States treats Vietnam as a non-market economy 9 (NME). This means the Department of Commerce does not use Vietnamese domestic prices to calculate dumping margins. Instead, it uses surrogate values from a market economy country — often Indonesia, the Philippines, or India. This methodology tends to produce higher and more volatile dumping margins than a market-based calculation would. It is a structural disadvantage for Vietnamese exporters and, by extension, for U.S. importers who source from Vietnam.
Conclusion
U.S. anti-dumping and countervailing duties on stamping parts from Vietnam depend entirely on material origin, HTS classification, and active scope rulings — not on the word "stamping." Audit your supply chain, trace your steel, and stay vigilant. For a deeper look at how Section 232 steel tariffs apply when sourcing sheet metal fabrication from Vietnam, or to understand the broader anti-dumping and countervailing duty rules for sourcing stamping parts from Vietnam, explore our related guides.
Frequently Asked Questions
How Do I Know If My Stamping Parts Are Subject to AD/CVD Duties from Vietnam?
One lesson we learned early at our Vietnam office is that the product name on your purchase order matters far less than the material it is made from and the Harmonized Tariff Schedule classification it receives at the U.S. border.
What Duty Rates Should I Expect When Sourcing Stamping Parts from Vietnam?
When we began helping clients shift sourcing from China to Vietnam around 2019, the assumption was simple: Vietnam means lower tariffs. That assumption is no longer safe for steel-based products.
How Can I Avoid Unexpected AD/CVD Costs When Importing Stamping Parts?
A buyer I work with once received a retroactive duty bill of $87,000 on a shipment of stamped steel mounts. The entries had been made during a trade remedy investigation window he did not know existed. That experience shaped how our team now manages every Vietnam-sourced metal project.
Footnotes
1. Authoritative International Trade Administration portal under the Department of Commerce. ↩︎
2. Official Federal Register notice for the chassis and subassemblies investigation involving Vietnam. ↩︎
3. Official site for U.S. Customs and Border Protection, responsible for enforcing trade laws and collecting duties. ↩︎
4. Official USITC portal for searching the Harmonized Tariff Schedule used for U.S. import classifications. ↩︎
5. Official Bureau of Industry and Security page explaining Section 232 tariffs on steel imports. ↩︎
6. Official journal of the U.S. government where all trade investigation notices and determinations are published. ↩︎
7. Authoritative ITA definition of substantial transformation for country of origin determinations. ↩︎
8. Official ITA page explaining the process of administrative reviews for AD/CVD orders. ↩︎
9. Official ITA list of countries designated as non-market economies for trade purposes. ↩︎
