Last quarter, a shipment of stamping parts we coordinated from our Vietnam facility got flagged at U.S. Customs — not because of quality, but because one certificate was missing from the documentation package.
To pass FDA review when sourcing stamping parts from Vietnam, you need FDA facility registration, ISO 13485 certification, Material Mill Test Reports, Certificates of Analysis, biocompatibility data if applicable, a Certificate of Origin, GMP compliance records, and an Affirmation of Compliance code for electronic customs entry.
This experience taught our team a hard lesson. The documents you prepare before shipping matter just as much as the part quality itself. Below, I will walk through every document category step by step so you can avoid the same costly delay.
What FDA Documentation Do I Need Before Importing Stamping Parts From Vietnam?
A buyer we work with in Ohio once assumed standard commercial invoices would clear FDA. They lost three weeks of production time waiting for a customs hold to resolve.
Before importing stamping parts from Vietnam, you need the supplier's FDA FURLS facility registration, device listing records, a complete technical dossier including material specifications and risk analysis, GMP compliance evidence under CFR Title 21 Part 820, and proper Affirmation of Compliance codes.
/ICHI-%20Photo/150-ton%20Stamping%20Press%20Machine%201.jpg)
Understanding When FDA Review Applies
Not every stamping part requires FDA review. The FDA regulates medical devices, food contact material 1s, drugs, and cosmetics. If your stamped bracket goes into an automotive assembly, the FDA has no jurisdiction. But if that same bracket becomes part of a surgical instrument or a food processing machine, FDA scrutiny kicks in.
Our team in Vietnam handles both types of projects. We stamp brackets for industrial equipment and precision components for medical device assemblers. The documentation burden is very different. For general industrial parts, you only need standard U.S. Customs and Border Protection entry documents. For FDA-regulated parts, you need a full compliance package.
Here is a quick way to determine your documentation level:
| Part End Use | FDA Review Required? | Primary Authority |
|---|---|---|
| Medical device component (Class I, II, or III) | Yes | FDA + CBP |
| Food contact material or food processing equipment part | Yes (food safety) | FDA + CBP |
| Automotive or construction hardware | No | CBP only |
| Consumer electronics bracket | No | CBP only |
| Drug delivery system component | Yes | FDA + CBP |
The Foundation: FDA Facility Registration
If your stamping parts fall under FDA jurisdiction, the Vietnamese manufacturing facility must be registered in the FDA Unified Registration and Listing System 2 (FURLS). This is non-negotiable. Without this registration, the FDA Entry Reviewer will flag the shipment immediately.
When we set up our Vietnam office, one of the first things we helped local partner factories understand was this registration requirement. Many smaller stamping shops in Vietnam have never heard of FURLS. They assume that because they hold an ISO 9001 certificate, they are cleared for U.S. export. That is not the case for medical or food-related components.
Device Listing and Product Codes
Beyond facility registration, the specific stamping part — if classified as a finished device or a critical subcomponent — must be listed with the FDA. The listing includes the product name, intended use, device classification, and the appropriate product code. This product code feeds directly into the Affirmation of Compliance that your customs broker enters into the Automated Commercial Environment 3 system at the port.
The Technical Dossier
The FDA may request a Summary of Technical Documents. This dossier typically includes material specifications, a risk analysis following ISO 14971 4, performance test results such as tensile strength and dimensional tolerances, and — if the part contacts the human body — biocompatibility data per ISO 10993 5. Our project managers compile this dossier alongside the supplier's quality team before the first shipment leaves Vietnam.
How Can I Verify My Vietnamese Supplier's Quality Records Meet FDA Requirements?
During a recent supplier audit at a stamping facility outside Ho Chi Minh City, our Vietnam-based team found that the factory had excellent stamping equipment but almost no traceable quality records. The parts looked good. The paperwork did not exist.
To verify your Vietnamese supplier's quality records meet FDA requirements, request their ISO 13485 certification, audit their Quality Management System documentation, review calibration logs and employee training records, inspect GMP compliance under CFR Title 21 Part 820, and confirm they maintain a complete Device Master Record.

What to Look for in a Supplier Audit
Verification starts with an on-site audit or, at minimum, a thorough document review. Many U.S. purchasing managers rely on us to conduct these audits because flying to Vietnam for every new supplier is impractical. Here is what we check:
ISO 13485 certification is the baseline. This standard governs the Quality Management System for medical device manufacturing. It covers design control, purchasing controls, production process validation, and corrective action procedures. If a Vietnamese stamping supplier does not hold this certification, they are not ready for FDA-regulated work.
Good Manufacturing Practices compliance goes beyond a certificate on the wall. We review actual production floor conditions, cleaning protocols for stamping dies, lubricant management, and contamination control. Under CFR Title 21 Part 820 8, the FDA expects documented evidence that the manufacturer controls its processes consistently.
Key Quality Records to Request
| Document | Purpose | FDA Relevance |
|---|---|---|
| ISO 13485 certificate (current) | Proves QMS for medical devices | Required baseline for FDA expectations |
| Equipment calibration logs | Shows measurement tools are accurate | Mandatory under 21 CFR 820.72 |
| Employee training records | Proves operators understand FDA standards | Required under 21 CFR 820.25 |
| Process validation reports (IQ/OQ/PQ) | Confirms stamping process consistency | Critical for demonstrating process control |
| Corrective and Preventive Action (CAPA) logs | Shows how nonconformances are handled | FDA inspectors review these closely |
| Incoming material inspection records | Verifies raw material quality | Supports material traceability |
The "Right First Time" Mindset
One thing I have learned from working with U.S. buyers is that they hate rework. Rework means delays, and delays mean missed production schedules. The quality records above are not just paperwork exercises. They represent a system that catches problems before parts ship.
When our team reviews a Vietnamese supplier's CAPA logs, we look for patterns. Are the same defects recurring? Is the root cause analysis thorough? A supplier that documents issues honestly and fixes them permanently is far more reliable than one with a suspiciously clean record. FDA inspectors look for the same patterns. A factory with zero documented nonconformances is a red flag, not a green light.
We also verify that the supplier's Technical Data Sheets for raw materials match what is actually being used on the production floor. It is surprisingly common for a factory to qualify with one steel grade and then substitute a cheaper alternative without updating records. This kind of gap can trigger a serious FDA violation.
What Certificates Should I Request to Avoid FDA Customs Holds on My Shipments?
The trade-off between thoroughness and speed is something we weigh on every shipment. Collect too few certificates and you risk a customs hold. Overwhelm the customs broker with irrelevant papers and you slow down the filing process.
To avoid FDA customs holds, request a Certificate of Origin, Certificate of Analysis for raw materials, Material Mill Test Reports, ISO 13485 certification, biocompatibility certificates if applicable, FDA FURLS registration confirmation, and ensure your customs broker files the correct Affirmation of Compliance product code.
/12-05-2025-Pictures%20-%20Name/Hydraulic%20press%201.jpg)
The Certificates That Matter at the Port
When a shipment of stamping parts arrives at a U.S. port, the FDA Entry Reviewer checks electronic entry data first. The Affirmation of Compliance code tells the reviewer what type of product is entering and triggers the appropriate review pathway. If the code is wrong or missing, your shipment is automatically flagged.
Beyond the electronic entry, the reviewer may request physical documents. Here is the priority list we prepare for every FDA-regulated shipment from Vietnam:
| Certificate | What It Proves | When FDA Requests It |
|---|---|---|
| Certificate of Origin | Part was manufactured in Vietnam | Routine — always required by CBP |
| Certificate of Analysis (CoA) | Chemical composition of raw material | When material safety is in question |
| Material Mill Test Report | Mechanical and chemical properties of metal | For metal components in medical or food use |
| ISO 13485 certificate | Supplier's QMS meets medical standards | When facility compliance is questioned |
| Biocompatibility certificate (ISO 10993) | Part is safe for human body contact | For implantable or body-contact devices |
| Migration testing report | No harmful substances leach from part | For food contact materials specifically |
| FDA FURLS registration printout | Facility is registered with FDA | When registration status is unclear |
| Commercial invoice (English) | Product description, HTS code, value, origin | Always required for entry |
Certificates for Food Contact Applications
If your stamping parts are used in food processing equipment — say, a stainless steel bracket inside a commercial oven — the FDA applies different rules than for medical devices. You will need evidence that the metal and any coatings comply with food contact material regulations. Migration testing reports show that no harmful chemicals leach from the stamped surface into food under normal operating conditions. A Certificate of Analysis for the specific steel alloy confirms the composition meets food-grade requirements.
The Certificate of Origin Question
The Certificate of Origin deserves special attention when sourcing from Vietnam. U.S. Customs wants proof that the parts were genuinely manufactured in Vietnam, not merely transshipped through Vietnam from another country. Our team maintains substantial transformation 9 workflow logs that detail every value-added step performed in Vietnam — blanking, stamping, forming, deburring, finishing. These logs defend the country-of-origin status during both Customs and FDA audits.
One practical tip: keep scanned copies of all certificates in a shared digital folder that your customs broker can access instantly. When the FDA Entry Reviewer requests additional information, the clock starts ticking. Having documents ready to transmit within hours — not days — is often the difference between a quick release and a multi-week hold.
How Do I Prepare Material Traceability and Compliance Reports for FDA Review?
A lesson we learned early in our Vietnam operations was that traceability cannot be added after the fact. If you do not build it into the production process from day one, you end up scrambling to reconstruct records when the FDA asks questions.
To prepare material traceability and compliance reports for FDA review, establish lot-level tracking from raw material receipt through finished stamping, maintain Material Mill Test Reports linked to each production batch, create Lot History Records, conduct First Article Inspections, and retain all documentation for a minimum of five years.

Building Traceability From Raw Material to Finished Part
Material traceability means you can take any single stamped part and trace it back to the specific coil or sheet of metal it came from. You know which mill produced the raw material, what heat number it carries, when it arrived at the factory, which press stamped it, and who inspected it. This chain of custody is what the FDA wants to see.
Our project managers work with Vietnamese suppliers to implement a simple but effective traceability system. Each incoming raw material batch receives a unique lot number. That lot number follows the material through every production step. When the finished parts are packed, the lot number appears on the box label, the packing list, and the Lot History Record.
The Lot History Record
A Lot History Record (LHR) is one of the most important documents for FDA review. It is essentially the biography of a production batch. Here is what a complete LHR includes:
- Raw material lot number and supplier
- Material Mill Test Report reference
- Date and time of stamping
- Press machine ID and operator name
- In-process inspection results (dimensions, visual)
- Post-stamping treatments (deburring, cleaning, coating)
- Final inspection results and First Article Inspection reference
- Packing and shipping details
First Article Inspection Reports
A First Article Inspection (FAI) is performed on the first part produced from a new setup. It verifies that every dimension and specification on the drawing is met before full production begins. For FDA-regulated parts, the FAI report becomes part of the Device Master Record that the finished device manufacturer maintains.
We require our Vietnamese stamping partners to perform FAI using calibrated instruments and to document results in a standardized format. This report, combined with the Material Mill Test Report and the Certificate of Analysis, creates a complete compliance package for the specific production run.
Post-Stamping Residual Analysis
For medical and food contact applications, what remains on the part surface after stamping matters. Industrial stamping lubricants can leave residues that affect biocompatibility or food safety. Our quality control process includes verification that cleaning steps remove these residues to acceptable levels. The cleaning validation report is another document that supports FDA compliance.
Record Retention
Both FDA regulations and Vietnam's own requirements mandate long-term record retention. The FDA expects records to be available for inspection at any time. Vietnam's updated rules require maintaining labeling records, certificates, and product data for at least five years. We advise our clients to keep digital backups of all traceability documents in a secure, accessible system. When an FDA auditor or customs reviewer requests records from a shipment made two years ago, you need to produce them quickly.
Some of our more forward-thinking clients are moving toward digital material passports that link raw material batches to finished stamped parts using unique digital identifiers. This approach creates an immutable record chain that simplifies any future FDA inquiry.
Conclusion
Passing FDA review when sourcing stamping parts from Vietnam demands preparation, not guesswork. Build your documentation system before production starts, verify your supplier’s quality records on-site, and keep every certificate accessible for years.
Frequently Asked Questions
What FDA Documentation Do I Need Before Importing Stamping Parts From Vietnam?
A buyer we work with in Ohio once assumed standard commercial invoices would clear FDA. They lost three weeks of production time waiting for a customs hold to resolve.
How Can I Verify My Vietnamese Supplier's Quality Records Meet FDA Requirements?
During a recent supplier audit at a stamping facility outside Ho Chi Minh City, our Vietnam-based team found that the factory had excellent stamping equipment but almost no traceable quality records. The parts looked good. The paperwork did not exist.
What Certificates Should I Request to Avoid FDA Customs Holds on My Shipments?
The trade-off between thoroughness and speed is something we weigh on every shipment. Collect too few certificates and you risk a customs hold. Overwhelm the customs broker with irrelevant papers and you slow down the filing process.
Footnotes
1. FDA resource on food contact substance regulations relevant to migration testing discussion. ↩︎
2. Official FDA landing page for medical device establishment registration and product listing requirements. ↩︎
3. CBP official system referenced for electronic customs entry of Affirmation of Compliance codes. ↩︎
4. Official ISO standard for medical device risk management referenced in the technical dossier section. ↩︎
5. ISO standard governing biocompatibility testing directly cited for body-contact devices. ↩︎
6. Official ISO standard page for medical device quality management systems mentioned repeatedly. ↩︎
7. Wikipedia background on GMP concept underlying multiple compliance sections in the article. ↩︎
8. Direct regulatory text for GMP compliance requirements cited multiple times in the article. ↩︎
9. Official International Trade Administration definition of substantial transformation for country of origin determinations. ↩︎
