Skip to main content

🇻🇳 178 profiles · Engineering review

Vietnam Manufacturing

What EU Preferential Tariff Policies Apply to Stamping Parts Exported From Vietnam?

July 17, 2026

Production floor at Viet Thanh Mechanical Production, a DEWIN-audited Vietnamese factory

EU preferential tariff policies for Vietnam-exported stamping parts under EVFTA agreement

EU preferential tariff policies on stamping parts exported from Vietnam confuse many buyers. I see it weekly when our Vietnam team quotes brackets and welded steel components for European clients.

Stamping parts exported from Vietnam qualify for 0% preferential tariffs under the EU-Vietnam Free Trade Agreement (EVFTA), provided they meet EVFTA rules of origin. Most industrial stampings are duty-free now, while automotive stamping parts reach full 0% duty by August 2027.

That sounds simple. It is not. The savings are real, but the compliance work behind them decides whether you keep the money or pay it back after an audit. Let me walk you through the details.

How do I confirm my stamping parts qualify for EU-Vietnam EVFTA preferential tariff rates?

A purchasing manager once sent me a drawing of a powder-coated mounting bracket 1 and asked one question: "Is this duty-free into Germany?" My honest answer was: it depends on two things.

Confirm eligibility in two steps: first, classify the part under the correct HS code to find its EVFTA import duty liberalization schedule; second, verify the part satisfies the Product Specific Rules (PSR) of origin in Vietnam. Both must pass before claiming preferential rates.

Steps to confirm EVFTA eligibility using HS code classification and origin rules verification

The EVFTA entered into force on August 1, 2020. It eliminates 99% of all tariffs between the EU and Vietnam. Around 65% of EU duties on Vietnamese goods dropped to zero on day one. The rest phase out progressively over seven years, ending in 2027.

Step 1: Get the HS Code Right

Classification decides everything. A general steel bracket usually falls under HS code 7326 (articles of iron or steel 2). A stamped body panel or chassis component for a vehicle falls under Chapter 87, typically heading 8708. These two paths carry very different tariff timelines. When our engineers in Vietnam review a new drawing, we classify the part before we quote landed cost. An incorrect HS code can invalidate the entire origin analysis and expose the importer to back duties.

Step 2: Check the Liberalization Schedule

Product Category Typical HS Code Pre-EVFTA MFN Duty EVFTA Status
General steel stampings and brackets 7326 0–2.7% 0% now
Machinery-related stamped parts Chapter 84 0–3% 0% now or final phase
Automotive stamping parts 8708 Up to 32% (car category) 0% by August 2027
Fasteners and fittings 7318 3.7% 0% now

For most industrial stampings, the Most-Favored-Nation (MFN) rates were already low, so the EVFTA benefit is modest but permanent. For automotive parts, the phase-out is where the big money sits. Duties step down every August 1 until they hit zero in 2027. Note one helpful safeguard: a "no-worse-off" clause applies until 2027, meaning the EVFTA rate never exceeds the rate previously available during the GSP transition period.

Also remember the negative check. Trade defense instruments, such as anti-dumping duties, apply separately from preferential tariffs. A part can be EVFTA duty-free and still face other measures, so we always screen both.

✔ Automotive stamping parts under HS 8708 only reach full 0% EU duty in August 2027, following a seven-year phase-out. True
The EVFTA classifies car parts as a sensitive category, so duties of up to 32% are dismantled progressively from August 2020 to August 2027.
✘ All stamping parts from Vietnam became duty-free the moment the EVFTA took effect in 2020. False
Only about 65% of tariff lines went to zero at entry into force; sensitive categories like automotive parts follow a gradual import duty liberalization schedule ending in 2027.
Video: Sample metal parts from audited Vietnamese factories in the DEWIN network. (@dewintech)

What documentation do I need to prove rules of origin for Vietnam-made stamping parts?

Documentation is where most claims fail, not eligibility. Our team once spent three weeks rebuilding a supplier's material traceability file because their steel invoices did not match their production records. The customer's EU broker refused the shipment paperwork until it did.

You need either a Certificate of Origin Form EUR.1 issued by Vietnamese authorities, or an origin statement from a REX-registered exporter for consignments under €6,000. Supporting evidence includes supplier declarations, bills of materials, production records, and mill test certificates.

Required documentation including EUR.1 certificate and REX statement proving Vietnam origin rules

Since January 1, 2023, the Generalized System of Preferences no longer applies Generalised Scheme of Preferences 3 to Vietnamese exports to the EU. The EVFTA is now the only preferential pathway. That shift caught some exporters off guard, because GSP paperwork habits no longer work.

The Two Proof Pathways

  1. Certificate of Origin Form EUR.1. Issued by the Vietnamese Ministry of Industry and Trade 4 or authorized bodies. This is the standard route for commercial shipments. The certificate can be submitted to EU customs within two years of the import declaration date, so a late C/O does not automatically kill your refund claim.
  2. Statement on origin via the REX system. Registered exporters 5 can self-certify origin on the invoice for consignments valued under €6,000. Fast and cheap, but only for small shipments.

The Evidence Behind the Certificate

The certificate alone is not enough. EU customs can audit origin claims up to five years after import. Your file must prove the claim. Here is what we compile for every EU-bound stamping project:

Document What It Proves
Bill of materials with origins Where every input comes from
Steel purchase invoices and mill test certificates (MTC) Material source; also confirms no Russian-origin steel per EU sanctions
Production and process records Real stamping, forming, and welding happened in Vietnam
Supplier declarations Origin status of purchased components
Costed BOM Value-added threshold compliance where PSR requires it

The MTC point deserves emphasis. Following EU sanctions on Russian iron and steel, importers must demonstrate that no Russian-origin steel entered the product. We now request mill certificates at purchase order stage, not at shipment stage. Waiting until loading day is how shipments get stuck.

One more discipline: your documents must match your actual manufacturing process. If your C/O says "stamped and welded in Vietnam" but your factory records show imported semi-finished parts merely painted locally, an audit will unwind the claim and impose back duties.

✔ A Certificate of Origin can be submitted to EU customs within two years of the import declaration date. True
The EVFTA allows retrospective claims, so importers who missed the preferential rate at clearance can still recover duties with a valid C/O filed within the two-year window.
✘ Holding a valid EUR.1 certificate guarantees preferential treatment even if underlying records are weak. False
EU customs can audit origin claims up to five years later; if production records and material traceability do not support the certificate, duties are reclaimed with penalties.

Can I combine Vietnam sourcing with China-based components and still claim EU tariff benefits?

This is the question I weigh with almost every client. Our supply chain spans offices in both Vietnam and China, so we face this trade-off constantly: Chinese inputs are often cheaper, but they can quietly destroy an origin claim if used carelessly.

Yes, but only if the Chinese materials undergo sufficient working or processing in Vietnam under the applicable Product Specific Rules, usually a Change in Tariff Heading or a value-added threshold. Simple assembly or finishing of Chinese-made parts does not confer Vietnamese origin.

Combining Vietnam sourcing with Chinese components while maintaining EU tariff benefit eligibility

EVFTA rules of origin 6 recognize three pathways to originating status. A part can be wholly obtained in Vietnam, produced exclusively from Vietnamese or EU-originating materials, or made from non-originating materials that undergo sufficient transformation per the PSR annex.

What Counts as Sufficient Transformation

For most stamped steel articles, the PSR requires a Change in Tariff Heading (CTH). In plain terms: the input must enter under one HS heading and the finished part must leave under a different one. Chinese steel coil or sheet that is blanked, stamped, formed, welded, and finished into a bracket in Vietnam typically satisfies CTH. The raw material heading changes to the finished-article heading, and real manufacturing value is added.

What fails? Importing near-finished Chinese stampings and only powder-coating, drilling, or packaging them in Vietnam. The EVFTA lists these as insufficient operations. EU authorities are running more post-import audits precisely to catch this "transshipment" pattern, and the consequences fall on the importer.

Tools That Help Mixed Supply Chains

  • Cumulation of origin. Materials originating in South Korea or the EU can count toward Vietnamese content under specific conditions. China is not a cumulation partner, so Chinese inputs always count as non-originating.
  • Accounting segregation. You can physically mix identical originating and non-originating steel stocks, provided an electronic inventory tracks the qualifying proportion. This saves warehouse headaches for high-volume stamping.
  • Duty drawback. The EVFTA permits Vietnamese manufacturers to reclaim import duties on raw materials even when the finished part exports to the EU at 0%. That improves the economics of using imported inputs legitimately.
  • Non-alteration rule. Consignments may transit or split in hubs like Singapore, our home base, as long as goods stay under customs supervision and receive no further processing.

Our practical rule: source the steel wherever it makes commercial sense, but perform all substantive stamping, forming, and welding in Vietnam, and document every step.

How do I calculate the actual cost savings from EVFTA tariffs on my stamping parts imports?

Numbers persuade better than treaties. When we prepare landed-cost comparisons for European buyers, the tariff line is often the deciding factor between a Vietnamese quote and an alternative source.

Calculate savings by multiplying your CIF customs value by the difference between the MFN rate and the EVFTA preferential rate for your HS code. For general stampings, savings run 2–4% of value; for automotive parts, savings can reach the full phased-out duty by 2027.

Calculating actual cost savings from EVFTA preferential tariffs on stamping parts imports

The math is simple. The inputs are not. Here is the working method we use.

The Four-Step Calculation

  1. Fix the HS code. A bracket under HS code 7326 and a chassis part under 8708 produce completely different answers.
  2. Find both rates. Look up the current MFN rate and the EVFTA rate for that code in the EU Access2Markets database. For phased items, check the rate for the current year.
  3. Apply to CIF value. EU duty is charged on the CIF customs value, so include freight and insurance in the base.
  4. Subtract compliance costs. C/O fees, traceability work, and any premium for origin-compliant materials reduce the net benefit.

A Worked Example

Line Item Scenario A: HS 7326 Bracket Scenario B: HS 8708 Auto Stamping
Annual CIF import value €400,000 €400,000
MFN duty rate 2.7% 4.5% (part-level; category up to 32%)
EVFTA rate (current) 0% Phasing to 0% by Aug 2027
Gross annual saving €10,800 Up to €18,000, growing each phase step
Compliance cost estimate €1,500–3,000 €3,000–6,000
Net annual benefit ~€8,000–9,300 ~€12,000–15,000 and rising

Two watch-outs from experience. First, budget for hidden regulatory costs on the horizon: stamping parts under HS 7326 are targeted for inclusion in the Carbon Border Adjustment Mechanism 7 reporting and certificate phase from 2026, which adds carbon-data obligations to steel articles. Second, savings only survive an audit if your origin file is solid; a reclaimed duty five years later erases years of margin. That is why we build the compliance cost into every quotation instead of treating it as optional.

For automotive buyers, the timing angle matters most. Each August, the phased rate steps down. Contracts signed now for 2026–2027 delivery should price in the falling duty, not today's rate.

✔ EU import duty is calculated on the CIF value, so freight and insurance costs increase the duty base and the potential EVFTA saving. True
The EU uses CIF customs valuation, meaning every euro of freight adds to the dutiable base, which magnifies the benefit of a 0% preferential rate.
✘ EVFTA savings are pure profit with no offsetting costs. False
Certificates, traceability systems, origin-compliant sourcing, and upcoming CBAM reporting all carry real costs that must be netted against the tariff saving.

Conclusion

EVFTA preferential tariffs make Vietnam a smart source for stamping parts, but only with correct HS classification, solid rules-of-origin proof, and audit-ready documentation. Get the compliance right, and the savings compound every year through 2027 and beyond.

Frequently Asked Questions

How do I confirm my stamping parts qualify for EU-Vietnam EVFTA preferential tariff rates?

A purchasing manager once sent me a drawing of a powder-coated mounting bracket 1 and asked one question: "Is this duty-free into Germany?" My honest answer was: it depends on two things.

What documentation do I need to prove rules of origin for Vietnam-made stamping parts?

Documentation is where most claims fail, not eligibility. Our team once spent three weeks rebuilding a supplier's material traceability file because their steel invoices did not match their production records. The customer's EU broker refused the shipment paperwork until it did.

Can I combine Vietnam sourcing with China-based components and still claim EU tariff benefits?

This is the question I weigh with almost every client. Our supply chain spans offices in both Vietnam and China, so we face this trade-off constantly: Chinese inputs are often cheaper, but they can quietly destroy an origin claim if used carelessly.

Footnotes


1. Provides a general definition of the component type being discussed in the trade context. ↩︎


2. Official EU portal explaining the Harmonized System used for product classification and tariff application. ↩︎


3. Official European Commission policy page for the Generalised Scheme of Preferences (GSP). ↩︎


4. The official government body in Vietnam responsible for issuing certificates of origin for exports. ↩︎


5. Official EU customs page explaining the REX self-certification system for origin declarations. ↩︎


6. Explains the fundamental trade concept determining product nationality for tariff purposes. ↩︎


7. Official EU page on the new environmental trade policy affecting steel articles and stamping parts. ↩︎

Manufacturing RFQ

Have a STEP Model or 2D Drawing for This Project?

Share your drawing, material, quantity and finishing requirements to begin a manufacturing quote. Confirm pricing, delivery and inspection requirements during the review.

Upload CAD & Get Quote →

This article is part of DEWIN's technical manufacturing engineering knowledge base. Factory-specific details come from each factory's profile page — please verify current information there or with our team.

Quick Sourcing Inquiry