Skip to main content

🇻🇳 178 profiles · Engineering review

Vietnam Manufacturing

What Are the Latest US Tariffs on Vietnamese Stamping Parts?

July 17, 2026

Cutting and drilling equipment at Az Construction And Interior Design, a DEWIN-audited Vietnamese factory

Overview of latest US tariffs impacting Vietnamese stamping parts imports

When our Vietnam office started fielding urgent calls from U.S. buyers about shifting tariff rates on stamping parts, I knew we needed clear answers fast.

US tariffs on Vietnamese stamping parts currently include a 20% reciprocal tariff effective August 7, 2025, with an additional 40% rate for transshipped goods and a potential 55% Section 232 duty on steel content, creating cumulative duties that can exceed 75% depending on Harmonized Tariff Schedule codes and material classification.

These layered tariffs create real confusion for purchasing managers. This article breaks down every rate, exemption, and compliance step so you can make informed sourcing decisions. Let me walk you through each layer.

How Do the Latest US Tariff Rates Affect My Vietnamese Stamping Parts Imports?

A buyer we work with in the Midwest recently asked me to map out every tariff layer hitting his stamping brackets. The answer was more complex than either of us expected — three separate tariff mechanisms can stack on top of each other.

The latest rates include a 20% reciprocal tariff under HTSUS heading 9903.02.69, a 40% penalty for transshipped goods, and up to 55% Section 232 duties on steel stamping parts classified under HTS 7301.20.50, meaning total duties can exceed 75% when these layers combine on a single shipment.

How combined 20% reciprocal, 40% transshipment, and 55% Section 232 tariffs affect Vietnamese stamping parts costs

Understanding how these tariff layers interact is the single most important thing you can do before placing your next order. Let me break each layer down.

The 20% Reciprocal Tariff

The U.S. initially proposed a 46% reciprocal tariff on Vietnamese goods back in April 2025. After negotiations, that rate dropped to 20% under Executive Order 14346 1. This 20% is an additional ad valorem tariff. It stacks on top of whatever base duty your specific stamping part already carries under the Harmonized Tariff Schedule.

A new HTSUS heading 2 — 9903.02.69 — was created specifically for Vietnamese-origin products. Every stamping part we ship from our partner factories in Vietnam now gets classified under this code for the reciprocal portion. The rate took effect on August 7, 2025, replacing a temporary 10% rate that had been in place since April 21, 2025.

The 40% Transshipment Penalty

This rate targets goods that are "minimally processed" in Vietnam to dodge tariffs on Chinese-origin materials. If a stamping part uses Chinese steel and only gets a superficial finishing step in Vietnam, U.S. Customs and Border Protection can reclassify it at the 40% rate instead of 20%.

From our perspective running supply chain operations in both China and Vietnam, the distinction matters enormously. A bracket that is fully cut, stamped, bent, and finished in Vietnam qualifies for the 20% rate. The same bracket made from Chinese blanks that only gets a hole punched in Vietnam does not. The enforcement is real, and CBP audits are increasing. For a deeper look at how US-China trade friction affects Vietnam transshipment risks for stamping parts, we have covered this topic in detail.

Section 232 Steel Tariffs — The Hidden 55%

This is the layer many buyers overlook. Steel stamping parts classified under HTS 7301.20.50 face a 55% tariff under Section 232 3 measures. On August 19, 2025, these tariffs expanded to cover over 400 products with steel or aluminum content.

Here is the critical question: is your stamping part classified as a "steel article" or an "automobile part"? The answer determines whether Section 232 applies. Automobile parts are currently exempt from Section 232 duties. Raw steel articles are not.

Tariff Layer Rate Trigger Effective Date
Base HTSUS Duty Varies by HTS code Standard import classification Ongoing
Reciprocal Tariff (Vietnam) 20% Vietnamese country of origin August 7, 2025
Transshipment Penalty 40% Goods deemed minimally processed August 7, 2025
Section 232 (Steel) 55% Steel stamping parts (HTS 7301.20.50) Maintained / Expanded August 2025
Section 301 (Proposed) Up to 12.5% IP, forced labor, excess capacity investigations Pending

Cumulative Duty Example

Let me illustrate the worst-case scenario. A steel stamping bracket shipped from Vietnam could face:

  • Base HTS duty (say 3%)
  • Plus 20% reciprocal tariff
  • Plus 55% Section 232 tariff

That totals 78% in duties. If it is flagged as transshipped, replace the 20% with 40%, and you are looking at 98%. These numbers are not theoretical. They are what Department of Commerce investigations and International Trade Commission 4 rulings have set into motion.

The good news? Proper classification, documentation, and supply chain structuring can keep your total duty at the lower end. That is exactly what our team helps buyers navigate.

✔ The 20% reciprocal tariff stacks on top of existing HTSUS base duties — it does not replace them True
Executive Order 14346 created an additional ad valorem tariff under HTSUS heading 9903.02.69 that is added to, not substituted for, the standard duty rate for each product classification.
✘ The 20% reciprocal tariff is the only new duty affecting Vietnamese stamping parts False
Section 232 duties of up to 55% on steel content, a 40% transshipment penalty, and pending Section 301 surcharges can all stack on top of the 20% reciprocal tariff, creating cumulative rates well above 75%.
Video: Sample metal parts from audited Vietnamese factories in the DEWIN network. (@dewintech)

What Documentation Do I Need to Prove Country of Origin for Vietnamese Stamping Parts?

One lesson I learned early in our Vietnam operations is that country of origin determination is not just a checkbox exercise — it is the difference between a 20% duty and a 40% penalty.

To prove Vietnamese origin for stamping parts, you need a Certificate of Origin (Form D or standard CO), mill test certificates showing where raw steel was melted and poured, detailed production records, CBP-compliant country-of-origin markings, and a Bill of Materials tracing every component's source country.

Required documentation proving Vietnamese origin including Certificate of Origin and mill test certificates

CBP is enforcing stricter rules than ever before. "Melted and poured 5" requirements for steel mean you cannot simply stamp Chinese steel in Vietnam and call it Vietnamese. Here is what our team prepares for every shipment.

The "Melted and Poured" Standard

For stamping parts to avoid the highest Section 232 tiers, you must prove that the raw steel was melted and poured in a non-adversarial country. This is not the same as proving final assembly location. If your Vietnamese supplier buys Chinese steel coil, stamps it into a bracket, and ships it to the U.S., CBP may classify that bracket as Chinese-origin — triggering the 40% transshipment penalty or even higher anti-dumping and countervailing duties 6. To understand the full scope of anti-dumping and countervailing duty rules that apply to sourcing stamping parts from Vietnam, we recommend reviewing the specific AD/CVD frameworks in detail.

Our Vietnam office conducts supplier audits specifically to verify steel sourcing. We require mill test certificates 7 that trace the steel back to its melt origin. Japanese, Korean, Taiwanese, and Indian steel mills are common sources that satisfy this requirement.

Required Documents Checklist

Document Purpose Who Issues It
Certificate of Origin (CO) Proves country of manufacture Vietnamese Chamber of Commerce or authorized body
Mill Test Certificate (MTC) Proves where steel was melted and poured Steel mill / raw material supplier
Bill of Materials (BOM) Lists every component and its source country Manufacturer
Production Records / Work Orders Shows manufacturing steps performed in Vietnam Manufacturer
Commercial Invoice with HTS Codes Declares correct Harmonized Tariff Schedule classification Exporter
Packing List with Country Markings CBP-compliant marking on each part or package Exporter / Logistics provider

CBP Marking Requirements

U.S. Customs requires that the country of origin marking be legible and visible and must withstand handling until it reaches the final U.S. purchaser. For precision metal components like stamping brackets, this can be tricky. Small parts often get packed in bulk. We ensure markings appear on individual part labels, inner packaging, and outer cartons.

If CBP finds unmarked or incorrectly marked goods, the shipment can be detained, re-marked at the importer's cost, or subject to penalties. We have seen cases where a simple label oversight triggered a full circumvention of trade duties investigation, delaying shipments by weeks.

Practical Tips from Our Experience

Keep a digital archive of every document for at least five years. CBP can audit past shipments retroactively. Work with your supplier to maintain consistent document formats — it makes audits smoother. If your stamping parts contain any Chinese-origin subcomponents, disclose them proactively. Trying to hide material origins is the fastest way to trigger a Department of Commerce investigation.

✔ Mill test certificates proving where steel was “melted and poured” are now required for Section 232 compliance True
CBP uses the “melted and poured” standard to determine the true origin of steel content, regardless of where the stamping or finishing was performed.
✘ A Certificate of Origin alone is enough to prove Vietnamese origin and avoid transshipment penalties False
CBP requires supporting documentation including mill test certificates, production records, and bills of materials. A CO without corroborating evidence of substantial transformation will not protect against a transshipment finding.

Can I Still Save on Costs by Sourcing Stamping Parts from Vietnam Despite New Tariffs?

I get this question almost weekly from purchasing managers who built their entire Asia sourcing strategy around Vietnam. The short answer is yes, but the math has changed dramatically, and so has the strategy.

Yes, sourcing stamping parts from Vietnam can still yield cost savings of 15–30% compared to domestic U.S. production, but only if you optimize HTS classification, ensure genuine Vietnamese origin to qualify for the 20% rate, explore auto parts exemptions from Section 232, and leverage tooling and die exemptions through temporary admission under bond.

Strategies to save 15-30% sourcing stamping parts from Vietnam despite new tariff challenges

The key is not to look at tariffs in isolation. Total landed cost includes raw material, labor, tooling, quality control, logistics, and duties. Let me show you where the savings still exist.

Classification Strategy: Auto Parts vs. Steel Articles

This is the single biggest lever you have. Section 232 exemptions explicitly include "automobiles and auto parts." If your stamping bracket is a finished component destined for a vehicle, it may avoid the 55% steel tariff entirely. You still pay the 20% reciprocal tariff, but that is a massive difference.

The risk? If your part is classified broadly as a "steel article" or "steel derivative," the 55% applies. Work with a licensed customs broker to review your HTS classification before you ship. A few hours of classification review can save tens of thousands of dollars per shipment.

The Tooling and Die Exemption

Here is a cost-saving angle most buyers miss. While finished stampings face high duties, the dies and molds used in metal stamping manufacturing can enter the U.S. under Temporary Importation under Bond 8 (TIB). This means if you need to bring tooling stateside for inspection, qualification, or backup production, you do not pay full duty on it. The TIB allows temporary admission without paying the standard tariff, as long as the tooling is exported again within a set period.

Cost Comparison: Vietnam vs. Alternatives

Factor Vietnam (20% Tariff) China (Tariffs 60%+) U.S. Domestic India (26% Reciprocal)
Raw Material Cost Low–Medium Low High Low–Medium
Labor Cost Low Low–Medium High Low
Reciprocal Tariff 20% 60%+ (various) 0% 26%
Section 232 Risk 55% if steel article 55% if steel article N/A 55% if steel article
Logistics Time 25–35 days by sea 25–35 days by sea 1–5 days 30–40 days by sea
Quality Infrastructure Improving rapidly Mature Mature Variable
DEWIN Local Team Yes (7 employees) Yes (21 employees) No No

Even with the 20% tariff, Vietnam remains competitive against China on total cost. The gap narrows compared to pre-tariff days, but Vietnamese labor rates, improving factory capabilities, and the absence of the extreme tariff stacking that China faces keep it viable. For a more detailed breakdown of how Section 301 tariffs affect sourcing costs for stamping parts from Vietnam, see our dedicated analysis.

Where the Real Savings Come From

Trade enforcement and compliance may seem like a cost center, but done right, it becomes a competitive advantage. Buyers who invest in proper classification, documentation, and supply chain transparency pay lower effective tariff rates. Those who cut corners face audits, penalties, and the 40% transshipment rate.

Our approach at DEWIN is to embed compliance into the sourcing process from day one. When we co-develop a stamping part with a U.S. buyer, we consider HTS classification during the design phase — not after the part is already in production. That proactive approach has saved our clients significant duty exposure.

The U.S.-Vietnam Framework Agreement also opens a door. Specific products listed in "Annex III" may qualify for 0% tariff rates if they meet strict alignment criteria. While the exact list of eligible stamping parts is not yet public, this is worth monitoring closely.

How Do I Stay Updated on Future Tariff Changes That Could Impact My Vietnam Supply Chain?

The tariff landscape shifted three times in four months during early 2025. From 46% to 10% to 20%, plus the introduction of the 40% transshipment penalty — the volatility caught many buyers off guard. I have learned that the only reliable strategy is building a system for continuous monitoring.

To stay updated on tariff changes affecting your Vietnam supply chain, monitor Federal Register notices, subscribe to CBP trade alerts, work with a licensed customs broker, track Section 301 trade actions and Department of Commerce investigations, and partner with a sourcing agent who has local teams in Vietnam tracking regulatory shifts in real time.

Best practices for tracking future tariff changes affecting Vietnam supply chain operations

Future tariff volatility is not a question of "if" but "when." Here are the specific risks on the horizon and the tools to track them.

Pending Section 301 Investigations

Vietnam is currently under three separate Section 301 investigations 9 covering intellectual property, forced labor, and excess capacity. Proposed additional tariffs of up to 12.5% could stack on top of the existing 20% reciprocal rate. The forced labor investigation specifically targets aluminum and steel supply chains linked to certain regions, which has direct implications for stamping parts and precision metal components.

These investigations are "expected any day now" according to trade analysts, but no final ruling has been issued. The uncertainty itself is a cost — it makes long-term pricing and contracts harder to commit to.

The Section 122 Sunset Clause

A 10% base tariff under Section 122 10 applies to most Vietnamese imports, but it carries a July 2026 sunset clause. When that clause expires, rates could either revert to standard MFN levels or be replaced by more aggressive country-specific surcharges. This "cliff" creates planning risk for any multi-year supply agreement.

Monitoring Tools and Resources

Here is what our team uses to stay ahead:

  1. Federal Register daily alerts — All tariff changes are published here before they take effect. Set up keyword alerts for "Vietnam," "stamping," "Section 232," and "Section 301."
  2. CBP CSMS (Cargo Systems Messaging Service) — Free email alerts on trade policy changes, entry requirements, and enforcement updates.
  3. Licensed customs broker — Your broker should proactively flag classification risks and rate changes. If they are not doing this, find one who will.
  4. Industry associations — Groups like the Precision Metalforming Association track tariffs specific to metal stamping manufacturing.
  5. Local sourcing partner — Our Vietnam office monitors Vietnamese government trade bulletins and Ministry of Industry communications that signal upcoming negotiations with the U.S. Trade Representative.

Key Dates and Risks to Watch

Event Expected Timeline Potential Impact
Section 301 Final Rulings (IP, Forced Labor, Excess Capacity) Late 2025 – Early 2026 Additional 12.5% tariff on top of existing rates
Section 122 Sunset Clause July 2026 Base 10% tariff may expire or be replaced
Annex III Product List Publication TBD (under negotiation) Select stamping parts may qualify for 0% tariff
Expanded Section 232 Derivative List Ongoing (last expanded August 2025) More steel/aluminum products may face 55% duty
Anti-dumping reviews on Vietnamese steel Annual (DOC review cycle) AD duties on specific steel products range from 40% to over 130%

Building Resilience into Your Supply Chain

Do not wait for a tariff change to react. Build flexibility into your contracts with price adjustment clauses tied to tariff changes. Maintain qualified backup suppliers in multiple countries. And most importantly, ensure your country of origin documentation is airtight at all times — International Trade Commission rulings and CBP enforcement actions move fast.

At DEWIN, we run quarterly tariff impact reviews with our U.S. clients. We model scenarios — what happens if the 20% goes to 30%, or if Section 301 surcharges land. That kind of forward planning is the difference between absorbing a tariff shock and being blindsided by one.

✔ The Section 122 tariffs on Vietnamese imports include a July 2026 sunset clause that could significantly change duty rates True
The Section 122 tariff authority has a built-in expiration, after which rates will either revert to MFN levels or require new legislative or executive action to continue.
✘ Once the 20% reciprocal tariff is set, it will remain fixed and cannot increase further False
Pending Section 301 investigations could add up to 12.5% on top of the 20%, and the U.S. retains the authority to modify reciprocal tariff rates through executive action based on ongoing trade negotiations.

Conclusion

US tariffs on Vietnamese stamping parts are complex, layered, and evolving. Smart classification, airtight documentation, and proactive monitoring are your best tools to control costs and stay compliant.

Frequently Asked Questions

How Do the Latest US Tariff Rates Affect My Vietnamese Stamping Parts Imports?

A buyer we work with in the Midwest recently asked me to map out every tariff layer hitting his stamping brackets. The answer was more complex than either of us expected — three separate tariff mechanisms can stack on top of each other.

What Documentation Do I Need to Prove Country of Origin for Vietnamese Stamping Parts?

One lesson I learned early in our Vietnam operations is that country of origin determination is not just a checkbox exercise — it is the difference between a 20% duty and a 40% penalty.

Can I Still Save on Costs by Sourcing Stamping Parts from Vietnam Despite New Tariffs?

I get this question almost weekly from purchasing managers who built their entire Asia sourcing strategy around Vietnam. The short answer is yes, but the math has changed dramatically, and so has the strategy.

Footnotes


1. Official executive order record establishing the reciprocal tariff rate. ↩︎


2. Official interactive search tool for the Harmonized Tariff Schedule of the United States. ↩︎


3. Commerce Department page explaining Section 232 national security tariff investigations. ↩︎


4. Official body issuing trade rulings referenced for tariff enforcement decisions. ↩︎


5. CBP guidance detailing steel origin verification standards for Section 232 compliance. ↩︎


6. International Trade Administration explanation of anti-dumping and countervailing duty enforcement. ↩︎


7. Authoritative Wikipedia entry for Mill Test Reports, also known as mill test certificates. ↩︎


8. CBP program allowing tooling and dies to enter the US duty-free temporarily. ↩︎


9. USTR page detailing Section 301 trade investigations affecting Vietnamese imports. ↩︎


10. US Code reference explaining the Section 122 tariff authority and its sunset clause. ↩︎

Manufacturing RFQ

Have a STEP Model or 2D Drawing for This Project?

Share your drawing, material, quantity and finishing requirements to begin a manufacturing quote. Confirm pricing, delivery and inspection requirements during the review.

Upload CAD & Get Quote →

This article is part of DEWIN's technical manufacturing engineering knowledge base. Factory-specific details come from each factory's profile page — please verify current information there or with our team.

Quick Sourcing Inquiry