A rejected shipment of custom brackets last year taught our team an expensive lesson about U.S. packaging and labeling requirements for stamping parts — one missing Country of Origin marking 1 held up an entire container at the port, costing our client weeks of production downtime.
U.S. packaging and labeling requirements for stamping parts mandate permanent Country of Origin marking on each piece per 19 CFR 134, corrosion-protective packaging, proper shipping container labels, and compliance with OEM-specific standards. Non-compliance risks customs seizure, costly rework, and shipment delays.
These rules affect every supplier shipping metal stamping parts into the United States. Below, we break down what you need to know — from the label on the part itself to the dunnage inside the crate.
What Labeling Information Must I Include on Custom Stamping Parts for U.S. Customers?
One trade-off we constantly weigh when quoting new stamping projects is whether to mark the part directly or mark the packaging. The answer almost always depends on part size, the customer's end-use, and CBP import regulations 2 — and getting it wrong can mean the entire shipment sits in a bonded warehouse.
Every imported stamping part must display its Country of Origin marking in English (e.g., "MADE IN VIETNAM"), a part number or description, material identification, and any OEM-required traceability data such as lot numbers, heat numbers, or barcoding and part serialization codes.

The Federal Mandate: 19 CFR 134
U.S. Customs and Border Protection enforces Title 19, U.S. Code, Section 1304. This law says every article of foreign origin imported into the United States must be marked with its country of origin. The marking must be in English. No abbreviations. So "MADE IN VIETNAM" is correct. "VN" is not.
For stamped metal parts, CBP prefers permanent methods: etching, engraving, embossing, or die-stamping directly onto the metal surface. Adhesive labels are discouraged because they can fall off during handling. If the label peels away, the part is considered unmarked — and that triggers penalties.
When Is Direct Marking Exempt?
Some stamping parts are too small to mark. Watch components, tiny clips, and miniature springs 3 fall into this category. CBP calls this the "J-List" exemption. But even then, the immediate packaging — the bag, the box, or the tray — must still carry the country of origin.
What Else Goes on the Label?
Beyond origin, U.S. buyers and OEMs typically require additional information. Here is what we include on labels for most projects shipping to the United States:
| Label Element | Requirement Source | Example |
|---|---|---|
| Country of Origin | 19 CFR 134 (CBP) | "MADE IN VIETNAM" |
| Part Number | OEM / Buyer Specification | "DW-BRK-2024-07" |
| Material Grade | Industry / Buyer Spec | "ASTM A36 Steel" |
| Lot / Heat Number | Traceability / ISO 9001 | "HT-240315-A" |
| Quantity | NIST Handbook 130 / Buyer | "50 PCS" |
| Net Weight | NIST Handbook 130 / Buyer | "12.5 kg / 27.6 lbs" |
| Purchase Order Number | Buyer Requirement | "PO-78432" |
| Supplier Name & Address | Fair Packaging and Labeling Act (if retail) | "DEWIN, Singapore" |
The "Made in USA" Nuance
There is a common misconception here. No federal law requires U.S.-made parts to carry a "Made in USA" label. But if a company chooses to make that claim, the FTC demands that "all or virtually all" of the manufacturing 4 happened in the United States. In OEM automotive contexts, even U.S.-origin parts must state "Country of Origin: USA" on internal documentation and labels.
Our team in Vietnam always confirms the marking method with the buyer before production starts. We stamp, engrave, or laser-etch the origin directly onto brackets, mounts, and structural parts. For tiny parts, we mark the individual bag. This prevents surprises at the port.
How Should I Package Stamping Parts to Prevent Damage During International Shipping?
Last year, a client in Ohio received a pallet of powder-coated L-brackets with scratched finishes and surface rust forming under the damaged coating. The parts were fine when they left the factory. The ocean transit — 30 days of humidity, temperature swings, and rough handling — destroyed them. That experience reshaped how we approach protective dunnage and crating for every stamping order.
Stamping parts need layered protection: Volatile Corrosion Inhibitor packaging (VCI paper or film) to prevent oxidation, foam or cardboard dividers to stop part-to-part contact, sturdy corrugated or wooden crates meeting ASTM shipping standards, and proper palletizing to withstand forklift handling and container stacking.
/Century%20Creation%20-%20Photo/Vacuum%20Vulcanize%20Molding%20Machine.jpg)
Why Ocean Freight Is Brutal on Metal Parts
A shipping container crossing the Pacific experiences temperature shifts of 20°C or more in a single day. This causes condensation — sometimes called "container rain" — which drips onto cargo. Raw steel and even some plated finishes corrode fast in these conditions. That is why Volatile Corrosion Inhibitor packaging is not optional. VCI paper or poly film 5 releases molecules that form an invisible protective layer on metal surfaces. When the part is unwrapped, the protection evaporates harmlessly.
There is also an increasing shift toward bio-based, biodegradable VCI alternatives. Some of our U.S. buyers now require these to meet their corporate ESG sustainability mandates. We work with VCI suppliers in Southeast Asia who offer both petroleum-based and plant-based options.
Packaging Architecture: Bulk vs. Unitized
The way you pack stamping parts depends on whether they ship in bulk or as unitized assemblies. Here is how we handle each scenario:
| Packaging Type | Part Handling | Inner Protection | Outer Container | Label Placement |
|---|---|---|---|---|
| Bulk (loose parts) | Parts bagged in VCI poly bags | Foam dividers between layers | Heavy-duty corrugated carton or wooden crate | Label on each bag + label on outer carton |
| Unitized (assembled) | Each unit individually wrapped | Bubble wrap or custom foam inserts | Carton with reinforced corners | Label on unit + label on outer carton |
| Palletized | Multiple cartons on pallet | Stretch wrap + desiccant packs | Pallet with banding and corner guards | Pallet label on two opposite sides |
Preventing Part-to-Part Damage
For powder-coated or plated parts — like the black brackets and galvanized mounts we produce regularly — surface contact causes scratches. We use cardboard dividers, foam inserts, or custom thermoformed trays. For high-value parts, we design reusable plastic containers with individual cells for each piece.
Shipping Container Labels
OEM automotive customers often require specific container labels. The GM 1724 label standard, for example, mandates labels on two opposite sides of every shipping container. These labels include the part number, quantity, supplier code, and purchase order number. Even non-automotive buyers increasingly want scannable barcodes on outer packaging for warehouse receiving.
Smart packaging is also emerging. Some aerospace and medical clients ask about IoT-enabled sensors that monitor humidity and shock levels inside the crate during transit. While still niche, these solutions are gaining traction for high-precision stamped components.
Desiccants and Moisture Control
Beyond VCI, we add silica gel desiccant packs inside sealed bags. For large crates, we use desiccant blankets. The goal is to keep the relative humidity inside the package below 40%. This combined approach — VCI plus desiccant — gives our buyers confidence that parts arrive dry and rust-free.
Which U.S. Compliance Standards Do I Need to Follow for Packaging Custom Parts?
A buyer in Texas once asked us to supply Material Safety Data Sheets for a batch of zinc-plated stamping brackets. Our team initially thought this was unnecessary for plain metal parts. But the plating chemistry triggered OSHA's Hazard Communication Standard 6, and the buyer's receiving warehouse required MSDS documentation before they would even unload the truck. It was a valuable lesson in understanding the full compliance landscape.
Key U.S. compliance standards for packaging custom stamping parts include 19 CFR 134 for Country of Origin, ASTM A700 for steel packaging and loading, the Fair Packaging and Labeling Act for retail goods, RoHS and REACH compliance for restricted substances, and 49 CFR Part 178 if hazardous coatings are involved.
.jpg)
ASTM A700: The Steel Packaging Baseline
ASTM A700 is the primary industry standard for packaging, marking, and loading steel products for shipment. It covers how to prevent mechanical damage 7, how to band and secure loads, and how to protect edges and surfaces. While not a federal law, most U.S. industrial buyers reference ASTM A700 in their purchase orders. If your packaging does not meet this standard, the buyer can reject the shipment.
RoHS and REACH: Restricted Substances
If your stamping parts use plating, coating, or surface treatments, you need to verify RoHS and REACH compliance. RoHS restricts hazardous substances like lead, cadmium, and hexavalent chromium. REACH — originally a European regulation — is increasingly referenced by U.S. buyers, especially those with global supply chains. Our team requests compliance certificates from every plating and coating subcontractor before shipment.
The Fair Packaging and Labeling Act
The Fair Packaging and Labeling Act (FPLA) applies when stamping parts are sold directly to consumers — think retail hardware brackets 8, hinges, or shelf supports. FPLA requires three things on the label:
- Declaration of Identity — What is the product? (e.g., "Steel Mounting Brackets")
- Responsible Party — Manufacturer or distributor name and address.
- Net Quantity — Must include both U.S. customary and metric units.
Most B2B stamping parts are exempt from FPLA because they are not sold to end consumers. But if your parts end up in retail packaging — at a home improvement store, for example — these rules apply.
Hazardous Materials Packaging (49 CFR Part 178)
This applies only in specific cases. If stamping parts are coated with flammable solvents, treated with certain rust preventatives, or shipped with hazardous cleaning residues, 49 CFR Part 178 kicks in. Packaging markings must be stamped, embossed, or printed — not just labeled. Material Safety Data Sheets must accompany the shipment.
ISO 9001 Quality Standards and Traceability
Many U.S. buyers require their stamping suppliers to hold ISO 9001 quality standards certification. Beyond the quality system itself, ISO 9001 drives documentation requirements: inspection reports 9, material certificates, chemical composition reports, and plating thickness certifications. These documents typically travel with the shipment or are uploaded to the buyer's supplier portal before the goods arrive.
| Compliance Area | Applicable Standard | When It Applies | Key Requirement |
|---|---|---|---|
| Country of Origin | 19 CFR 134 | All imported parts | Permanent English marking on part or package |
| Steel Packaging | ASTM A700 | Steel products | Proper banding, edge protection, load securing |
| Consumer Labeling | Fair Packaging and Labeling Act | Retail-sold parts only | Identity, responsible party, net quantity (dual units) |
| Hazardous Coatings | 49 CFR Part 178 | Flammable/hazardous coatings | Stamped/embossed package markings, MSDS |
| Restricted Substances | RoHS / REACH | Plated or coated parts | Certificates of compliance for restricted materials |
| Quality Traceability | ISO 9001 / 21 CFR 820 | Industrial / Medical parts | Lot numbers, heat numbers, inspection records |
| Children's Products | 16 CFR 1500.19/20 | If parts are for toys | Small parts warnings, age grading |
Digital Product Passports and the Future
An emerging trend is the Digital Product Passport. Some forward-thinking buyers now request QR codes etched directly onto stamped parts. Scanning the code provides instant access to lifecycle data: material origin, manufacturing date, test results, and even conflict mineral compliance documentation. While not yet mandatory in the U.S., this approach aligns with barcoding and part serialization requirements that automotive and medical OEMs already enforce.
Can My Asian Supplier Handle U.S.-Specific Packaging and Labeling Requirements Without Delays?
When we first started managing supply chains from Vietnam for U.S. buyers, the most frequent complaint was not about part quality. It was about packaging and labeling errors. A wrong label, a missing lot code, or inadequate rust protection — these "minor" issues caused major delays at the receiving dock and sometimes triggered formal corrective action requests.
Yes, an experienced Asian supplier can meet U.S. packaging and labeling requirements without delays — but only if they have established quality control processes, understand CBP import regulations and OEM-specific standards, and work with a supply chain partner who verifies compliance before shipment.
/12-05-2025-Pictures%20-%20Name/Hydraulic%20press%201.jpg)
The Root Cause of Most Delays
In our experience coordinating between factories in Vietnam and buyers in the United States, packaging and labeling failures almost always trace back to one problem: unclear or missing specifications at the quoting stage. The buyer assumes the supplier knows U.S. requirements. The supplier assumes the buyer will provide label templates. Neither side confirms the details. The result is rework, re-labeling, or even re-shipment.
We solve this by creating a packaging and labeling specification document for every new project. This document covers:
- Marking method (stamp, engrave, laser-etch, or label)
- Label content and format (part number, lot, quantity, origin, barcode type)
- Inner packaging materials (VCI type, divider material, desiccant quantity)
- Outer packaging (carton specs, pallet dimensions, banding method)
- Shipping container labels (placement, format, barcode standard)
The PPAP Connection
For automotive and high-specification orders, the Production Part Approval Process 10 (PPAP) includes packaging approval. During our PPAP submissions, we provide the buyer with sample packaging, sample labels, and photographs of the packed condition. The buyer signs off before mass production begins. This eliminates surprises.
What to Look for in a Supplier
Not every factory in Asia understands the difference between a generic export label and a label that meets 19 CFR 134 or GM 1724 requirements. Here is what to evaluate:
- Does the supplier have experience shipping to the U.S.? Ask for references.
- Do they use VCI packaging as standard for metal parts? If not, they are behind.
- Can they produce permanent markings? Laser engravers and die-stamp tools should be on-site.
- Do they have a final inspection process? At DEWIN, our quality team checks every label, every bag seal, and every carton before the shipment leaves.
How We Prevent Delays
Our approach is straightforward. Before any production run ships, our inspection team in Vietnam or China performs a final check against the packaging specification. We verify label accuracy, VCI presence, desiccant placement, and carton integrity. We photograph everything. We upload the photos and inspection report to our client portal. The buyer reviews and approves before the goods move to the port.
This process adds about one day to the shipping timeline. But it eliminates weeks of delay at the U.S. receiving dock. It also reduces the risk of formal non-conformance reports that damage the supplier relationship.
AI-driven machine vision systems are also becoming more common in packaging lines. These systems use cameras to verify label legibility, barcode scannability, and placement accuracy in real time. While most small and mid-size stamping factories in Asia have not adopted this technology yet, it is on the horizon — and it will further reduce human error in high-volume compliance scenarios.
Conclusion
U.S. packaging and labeling requirements for stamping parts demand permanent origin marking, corrosion-protective packaging, proper documentation, and OEM-specific label compliance — getting these right before shipment prevents costly delays and protects your supply chain.
Frequently Asked Questions
When Is Direct Marking Exempt?
Some stamping parts are too small to mark. Watch components, tiny clips, and miniature springs 3 fall into this category. CBP calls this the "J-List" exemption. But even then, the immediate packaging — the bag, the box, or the tray — must still carry the country of origin.
What Else Goes on the Label?
Beyond origin, U.S. buyers and OEMs typically require additional information. Here is what we include on labels for most projects shipping to the United States:
What Labeling Information Must I Include on Custom Stamping Parts for U.S. Customers?
One trade-off we constantly weigh when quoting new stamping projects is whether to mark the part directly or mark the packaging. The answer almost always depends on part size, the customer's end-use, and CBP import regulations 2 — and getting it wrong can mean the entire shipment sits in a bonded warehouse.
Footnotes
1. Official government source for 19 CFR 134, the specific regulation cited in the article. ↩︎
2. Comprehensive overview of U.S. Customs and Border Protection regulations for importing commercial goods. ↩︎
3. Technical overview of springs, including small-scale components used in precision stamping. ↩︎
4. FTC guidelines on the ‘all or virtually all’ standard for making domestic origin claims. ↩︎
5. Technical definition and applications of polymer films used in industrial packaging. ↩︎
6. OSHA’s standard requiring the communication of chemical hazards via labels and safety data sheets. ↩︎
7. Official ASTM standard for packaging and loading steel products to prevent transit damage. ↩︎
8. Federal regulations governing the labeling of consumer commodities under the FPLA. ↩︎
9. Information on ISO 9001:2015, the international standard for quality management systems. ↩︎
10. Industry-standard process for ensuring supplier quality and packaging approval in manufacturing. ↩︎
