A single failed weld on a structural frame nearly cost one of our U.S. clients a six-figure product recall — all because the original supplier had no verifiable welder qualification on file.
Quality certifications you should request when sourcing welding parts include AWS Certified Welder credentials, ISO 3834 certification for welding quality management, ISO 9001 for overall quality systems, ASME Section IX compliance, qualified Welding Procedure Specifications, Procedure Qualification Records, material traceability certificates, and Non-Destructive Testing reports from certified inspectors.
The rest of this article breaks down each certification, explains which standards matter for your specific application, and shows you how to verify that a supplier’s claims are genuine — especially when sourcing from Southeast Asia.
Which international ISO standards should I prioritize for my custom welding projects?
When our team in Vietnam audits a new welding supplier, the very first documents we ask for are ISO certificates — not because they guarantee perfection, but because their absence tells us a lot about how seriously a shop treats process control Non-Destructive Testing Reports 1.
For custom welding projects, prioritize ISO 3834 certification (quality requirements for fusion welding), ISO 9001 (overall quality management system), and EN ISO 15614 / EN ISO 9606 (welding procedure and welder qualification). These standards form the backbone of any credible supplier qualification program and ensure repeatable, code-compliant welds.

ISO 3834 — The Welding-Specific Standard
ISO 3834 is not a general quality certificate. It deals only with fusion welding of metallic materials. It forces a supplier to control every variable: design review, subcontracting, incoming materials, welding consumables, heat treatment, inspection, and non-conformance handling. There are three levels — Comprehensive (Part 2), Standard (Part 3), and Elementary (Part 4). For structural frames, heavy-duty brackets, and any load-bearing welded assembly, we always require at least ISO 3834-2 2.
ISO 9001 — The Broader Quality Management System
ISO 9001 covers a company's entire quality management system 3. It does not specifically address welding, but it ensures the supplier has documented procedures for corrective actions, customer complaints, internal audits, and continuous improvement. Think of it as the foundation. ISO 3834 is the welding-specific layer on top.
EN ISO 15614 and EN ISO 9606
These two standards are critical for projects destined for European or marine markets. EN ISO 15614 4 qualifies the welding procedure itself — it proves that a specific combination of process, material, thickness, joint design, and heat input produces an acceptable weld. EN ISO 9606 qualifies the individual welder. Together, they generate the Procedure Qualification Record 5 and welder qualification records your engineering team needs to review.
| Standard | What It Covers | When to Require It |
|---|---|---|
| ISO 3834-2 | Comprehensive welding quality requirements | Load-bearing and safety-critical welded parts |
| ISO 3834-3 | Standard welding quality requirements | General fabrication with moderate risk |
| ISO 9001 | Overall quality management system | All suppliers, as a baseline |
| EN ISO 15614 | Welding procedure qualification | European market, marine, offshore |
| EN ISO 9606 | Welder performance qualification | European market, marine, offshore |
| ASME Section IX | Welding and brazing qualifications | Pressure vessels, U.S. code work |
How These Standards Work Together
No single standard covers everything. ISO 9001 ensures the business runs a quality management system. ISO 3834 ensures the welding shop controls welding-specific risks. EN ISO 15614 and EN ISO 9606 prove that procedures and people are qualified. When we manage a sourcing project for a U.S. client, we map the part's end-use application to the correct combination of standards before we even send a drawing to a potential supplier.
How do I confirm that my supplier's welders and processes are AWS or ISO 3834 compliant?
Last year, a purchasing manager we work with discovered that three of his supplier's "certified" welders had let their AWS credentials expire eighteen months earlier — yet the supplier kept listing them as qualified on every quote.
To confirm AWS or ISO 3834 compliance, request copies of each welder's current AWS Certified Welder card, verify Welding Procedure Specifications are qualified by a Procedure Qualification Record, ask for AWS Certified Welding Inspector oversight documentation, and cross-check certificate numbers with the issuing body or accredited test facility.

Step-by-Step Verification Process
Confirming compliance is not a one-time check. It is a process. Here is how our quality engineers in Vietnam handle it during a supplier audit:
- Request the Welding Procedure Specification. Every weld on your drawing should be covered by a WPS. The WPS states the process (GMAW, SMAW, FCAW, TIG), base material, filler metal, preheat, interpass temperature, and acceptance criteria.
- Ask for the Procedure Qualification Record. The PQR is the test evidence behind the WPS. It includes actual test coupons, mechanical test results, and sometimes radiographic or ultrasonic examination results.
- Check each welder's qualification record. Under AWS D1.1 Structural Welding Code 6, a welder must pass a performance test in the specific process, position, and material thickness relevant to your job. Under ASME Section IX, the rules are similar but may differ in detail. The welder should hold a current AWS Certified Welder card or equivalent documentation.
- Confirm CWI presence. A Certified Welding Inspector 7 should be overseeing production. Ask for the CWI's certificate number and verify it through the AWS website or by contacting the issuing body directly.
- Audit in person or through a third party. We conduct on-site supplier audits specifically for welding capability. We check calibration records for welding machines, storage conditions for consumables, and whether the shop floor actually follows the WPS during production.
AWS vs. ISO 3834: Understanding the Difference
Many buyers conflate these two. AWS certifications (CW, CWI, CWS) are credentials for individuals. ISO 3834 is a system certification for the organization. You need both. A shop can have ISO 3834 certification but employ welders whose individual qualifications have lapsed. Conversely, a shop can have AWS-certified welders but lack a documented quality management system for welding.
| Verification Item | What to Request | How to Verify |
|---|---|---|
| Welder qualification | AWS CW card or EN ISO 9606 certificate | Check expiry date; contact issuing body |
| Welding procedure | WPS + supporting PQR | Review essential variables against your drawing |
| Welding inspection | CWI certificate and inspection reports | Verify CWI certificate number on AWS database |
| System certification | ISO 3834 certificate | Confirm issuing body is accredited (IAF member) |
| Equipment calibration | Calibration records for welding machines | Review dates and calibration lab accreditation |
Red Flags to Watch For
If a supplier cannot produce a WPS within 24 hours of your request, that is a warning sign. If welder qualification records list only one process and one position, but your parts require multiple configurations, the welders are not qualified for your job. If there is no Certified Welding Inspector on staff or on contract, walk away. Welding inspection is not optional for structural, pressure, or safety-critical components.
What quality control documentation should I demand to avoid defects in my welded components?
One trade-off we weigh on every custom welding project is how much documentation to require versus how much cost and lead time it adds — but the math almost always favors more documentation, because a single batch of defective parts costs far more than the paperwork.
To avoid defects in welded components, demand a complete documentation package: qualified Welding Procedure Specifications, Procedure Qualification Records, welder qualification certificates, material certificates (EN 10204 3.1 or 3.2 Mill Test Reports), in-process inspection records, Non-Destructive Testing reports, dimensional inspection reports, and final acceptance documentation with clear acceptance criteria.

The Complete Documentation Checklist
Documentation is your insurance policy. Without it, you cannot trace a defect back to its root cause, and you cannot hold anyone accountable. Here is the full list we compile for every welding project we manage:
- Welding Procedure Specification (WPS): Defines every parameter the welder must follow.
- Procedure Qualification Record (PQR): Proves the WPS produces sound welds.
- Welder Qualification Records: Proves each welder is tested and qualified for the job.
- Material Certificates (Mill Test Reports): EN 10204 Type 3.1 certificates confirm the chemical composition and mechanical properties of base metals and consumables. Type 3.2 certificates add third-party validation.
- Incoming Material Inspection Records: Confirms that received materials match the certificates.
- In-Process Inspection Reports: Generated by a CWI or quality inspector during production. These cover fit-up, preheat, interpass temperature, and visual weld quality.
- Non-Destructive Testing Reports: Depending on the application, this may include radiographic testing (RT), ultrasonic testing (UT), magnetic particle testing (MT), or liquid penetrant testing (PT). NDT personnel should hold certifications to at least Level II under ASNT SNT-TC-1A or ISO 9712. For detailed guidance on how to obtain these reports from your supplier, see our guide on how to request weld inspection and X-ray reports when sourcing sheet metal fabrication.
- Dimensional Inspection Reports: Verifies that the finished weldment meets drawing tolerances.
- Final Acceptance Report: A summary document that references all of the above and states whether the part meets acceptance criteria.
Material Traceability — Why It Matters
Material traceability 8 links every piece of steel or aluminum in your welded assembly back to its heat number, mill, and chemical composition. If a defect appears in the field, traceability lets you determine whether the issue is a material problem or a process problem. On our projects, we require that heat numbers be physically marked on each piece and recorded in the inspection documentation. For high-integrity applications, we also request 3.2 Mill Test Reports, which are independently verified by a third-party body.
| Document | Purpose | Who Generates It |
|---|---|---|
| WPS | Defines welding parameters | Welding engineer |
| PQR | Qualifies the WPS with test data | Testing lab / welding engineer |
| Welder qualification record | Proves individual welder capability | Accredited test facility |
| Mill Test Report (3.1 / 3.2) | Confirms material properties | Mill / third-party inspector |
| In-process inspection report | Catches defects during production | CWI or quality inspector |
| NDT report (RT, UT, MT, PT) | Detects subsurface and surface defects | Certified NDT technician |
| Dimensional report | Verifies tolerances | QC inspector |
| Final acceptance report | Summarizes pass/fail status | Quality manager |
Connecting Documentation to Defect Prevention
Each document serves a specific gate in the production process. The WPS prevents process errors before welding starts. In-process inspection catches problems while they can still be fixed. NDT detects hidden defects like porosity, lack of fusion, or cracks that visual inspection cannot find. Dimensional inspection confirms the assembly will fit in the customer's application. When we manage projects for our U.S. clients, we define these gate points in a quality plan before production begins. This gives the supplier a clear roadmap and gives our clients confidence that nothing is skipped.
How can I validate the authenticity of certifications when sourcing welding parts from Southeast Asia?
During a recent supplier audit in Vietnam, our local team found a welding shop displaying an ISO 3834 certificate on the wall — issued by a body that did not appear in any accreditation database. The certificate looked professional. The logo was convincing. But it was worthless.
To validate certification authenticity in Southeast Asia, cross-reference the certificate number and issuing body with recognized accreditation databases such as the IAF CertSearch tool, verify AWS credentials through the AWS online lookup, conduct on-site audits to review original documents, and request third-party verification from an independent inspection agency before placing orders.

Why Certification Fraud Happens
Certification fraud is not unique to Southeast Asia, but it is more common in regions where demand for qualified suppliers outpaces the supply of genuinely certified shops. Some suppliers purchase counterfeit certificates. Others let certifications expire and continue to display them. A few hold valid certificates but apply them to work outside the certified scope. The result for buyers is the same: parts that do not meet code, rework costs, delivery delays, and potential safety failures.
Practical Validation Steps
Our approach to certification validation has evolved over years of managing supply chains across Vietnam, China, Taiwan, and India. Here is what works:
- Use public databases. The IAF CertSearch database 9 lets you verify ISO management system certificates globally. The AWS website allows you to look up individual CWI and CW credentials by name or certificate number.
- Check the accreditation body. The certification body that issued the ISO 3834 or ISO 9001 certificate must itself be accredited by an IAF member. If the accreditation body is unknown, the certificate may be from an unaccredited mill.
- Review the scope statement. Every ISO certificate has a scope. It might say "fabrication of structural steel components" but not cover pressure vessel work. Make sure the scope matches your product.
- Audit on-site. There is no substitute for visiting the factory. During audits, we review original certificates, check that welder qualification records are current, watch welders work, and verify that the WPS posted at each workstation matches the qualified PQR.
- Engage a third-party inspection agency. Companies like SGS, Bureau Veritas, or TÜV can perform pre-shipment inspections and supplier assessments. Their involvement adds an independent verification layer that is hard to fake.
- Request digital traceability. Some forward-thinking suppliers now maintain digital records of material certificates, welder qualifications, and inspection data in cloud-based systems. This makes it easier to audit remotely and reduces the risk of document tampering.
Regional Considerations
In Vietnam, the welding industry is growing rapidly, and many shops are investing in genuine certifications to serve export markets. But the pace of growth also means that some newer facilities have not yet built mature quality management systems. In China, the supplier landscape is vast, and certification quality varies widely by region and factory size. Taiwan tends to have more established quality infrastructure. India is similar to Vietnam in that rapid industrialization has created a mix of highly capable and underprepared suppliers. Regardless of the country, the validation steps above apply universally.
Building Long-Term Trust
Certification validation is not a one-time event. Certificates expire. Welders leave. Processes change. We build ongoing monitoring into our supplier management programs. This includes periodic re-audits, random inspection of documentation on active orders, and maintaining direct relationships with the supplier's quality team. For our U.S. clients, this continuous oversight is what turns a foreign supplier into a reliable partner rather than a gamble. To learn more about evaluating AWS welding compliance when sourcing sheet metal fabrication, we have a dedicated deep-dive on the topic.
Conclusion
Sourcing welded parts without verifying quality certifications is a risk no purchasing manager should take — demand ISO 3834, AWS credentials, qualified WPS and PQR documents, material traceability, and NDT reports, then validate every claim independently. For a broader overview of the common quality certifications for sheet metal fabrication, see our companion guide.
Frequently Asked Questions
Which international ISO standards should I prioritize for my custom welding projects?
When our team in Vietnam audits a new welding supplier, the very first documents we ask for are ISO certificates — not because they guarantee perfection, but because their absence tells us a lot about how seriously a shop treats process control Non-Destructive Testing Reports 1 .
How do I confirm that my supplier's welders and processes are AWS or ISO 3834 compliant?
Last year, a purchasing manager we work with discovered that three of his supplier's "certified" welders had let their AWS credentials expire eighteen months earlier — yet the supplier kept listing them as qualified on every quote.
What quality control documentation should I demand to avoid defects in my welded components?
One trade-off we weigh on every custom welding project is how much documentation to require versus how much cost and lead time it adds — but the math almost always favors more documentation, because a single batch of defective parts costs far more than the paperwork.
Footnotes
1. Explains the importance and types of NDT in quality control. ↩︎
2. Details comprehensive quality requirements for fusion welding of metallic materials. ↩︎
3. Provides a foundational understanding of what a quality management system entails. ↩︎
4. Details the international standard for welding procedure qualification. ↩︎
5. Explains the purpose and content of a PQR in welding. ↩︎
6. Official source for the widely used structural steel welding code. ↩︎
7. Describes the role and certification of a CWI in welding inspection. ↩︎
8. Replaced with an authoritative page from SGS, a leading inspection, verification, testing, and certification company, providing a clear explanation of material traceability. ↩︎
9. Provides the official tool for verifying ISO management system certifications. ↩︎
