I once watched a client’s shipment of stamped brackets sit in Rotterdam customs 1 for three weeks. The parts were perfect. The [technical documents for the stamping parts](https://dewintech.com/blog/what-technical-documents-needed-first-oem-stamping-parts-purchase/) were not.
European manufacturers sourcing stamping parts should prepare 2D drawings with GD&T specifications, 3D CAD models, EN 10204 material certification (Type 3.1), RoHS and REACH compliance declarations, a PPAP Level 3 package, a Quality Control Plan, and surface treatment specifications before contacting any supplier.
That list sounds long. It is. But each document protects you from a specific and expensive failure mode. Let me walk you through them one by one.
What drawings and specifications do I need to prepare before contacting a stamping supplier?
When our project team in Vietnam receives a new stamping RFQ, the first thing we check is the drawing package. A weak drawing package tells us the project will struggle later.
Before contacting a stamping supplier, prepare a fully dimensioned 2D drawing with tolerances, a 3D CAD model in STEP format, a material specification with grade and thickness, surface treatment specifications, a bill of materials, and expected annual volumes for accurate tooling quotes.

A stamping supplier can only quote what you define. Vague inputs produce vague quotes, and vague quotes produce disputes. So your design package needs to answer every question before the supplier asks it.
The core documents in your design package
Start with the 2D drawing. This is the legal reference for acceptance or rejection. It must show all critical dimensions, tolerances, bend radii, hole positions, and burr direction. Then add the 3D CAD model. Suppliers use it for tooling design approval and die simulation. The two must match. If they conflict, state which one governs.
Next comes the material callout. Do not just write "steel." Specify the grade, such as S235 or S355MC, the thickness, and the applicable DIN or EN standard. For coated parts, define the surface treatment specifications separately: zinc plating thickness, hot dip galvanizing, or KTL coating, with test methods.
| Document | Purpose | Common Mistake |
|---|---|---|
| 2D drawing with tolerances | Legal acceptance criteria | Missing burr direction or bend tolerance |
| 3D CAD model (STEP) | Tooling design and simulation | Model does not match 2D drawing |
| Material specification | Defines grade, thickness, standard | Writing "steel" with no grade |
| Surface treatment spec | Corrosion protection and finish | No coating thickness or test method |
| Bill of materials | Itemizes all purchased items | Missing fastener or insert part numbers |
| Annual volume forecast | Sizes the tooling investment | No forecast, so tooling is misquoted |
Tolerances: choose your standard deliberately
European drawings usually reference ISO 2768 2 for general tolerances or DIN 6930 for stamped steel parts. DIN 6930 is stricter and accounts for die roll and fracture zones unique to sheared metal. In our experience, ISO 2768 medium class works fine for structural brackets. Reserve tighter callouts, down to ±0.05 mm, for genuinely critical features. Every unnecessary tight tolerance adds cost and inspection time.
Finally, include design-for-manufacturing basics. Keep hole spacing at roughly two times material thickness to avoid bulging. Flag any feature where you can accept supplier feedback. That single note often saves a full tooling revision.
How do I ensure my technical documents meet CE, RoHS, and REACH requirements for European compliance?
A purchasing manager once told me his previous supplier shipped perfect zinc-plated clips with hexavalent chromium 3 in the passivation layer. The whole lot was unsellable in the EU. Nobody had asked.
Ensure compliance by requesting written RoHS and REACH declarations from your supplier, obtaining EN 10204 Type 3.1 material certificates, maintaining EU technical documentation for 10 years, listing all substances of very high concern, and verifying surface coatings contain no restricted chemicals.

Compliance documents are not optional extras in Europe. Market surveillance authorities can request your technical file at any time. If you cannot produce it, your product can be pulled from the market and you carry the legal liability, not your Asian supplier.
Build the compliance file before production, not after
EU law expects technical documentation to exist before the product is placed on the market. It must be retained for 10 years. For stamped components, your file should contain the risk assessment, the list of applicable EU directives, the conformity assessment procedure followed, and identification of critical components and materials.
The material certificate sits at the center of this file. Insist on EN 10204 material certification 4, Type 3.1 as the standard. A 3.1 certificate verifies the chemical composition and mechanical properties of the actual steel batch used. For regulated sectors like medical devices under MDR, go further: require melt-number traceability from coil to finished component. Blind sourcing of raw material is no longer viable there.
RoHS and REACH in practice
RoHS restricts substances like lead, cadmium, and hexavalent chromium. Stamped parts get caught most often through coatings and platings, not the base steel. REACH requires you to track substances of very high concern 5 above 0.1% by weight and communicate them down the supply chain. So request both declarations in writing, per part number, and refresh them when the SVHC candidate list updates. When we audit suppliers in Vietnam, we check whether their plating subcontractors hold current RoHS test reports. Many stamping shops outsource plating, and that is exactly where compliance chains break. Ask that question explicitly. Newer obligations like CBAM emissions data and conflict minerals reporting are also arriving on European purchasing checklists, so build your document request template with room to grow.
What quality control documents should I request to avoid non-conforming stamping parts?
Early in my sourcing career, I approved a supplier based on samples alone. The samples were hand-finished. Mass production was not. That lesson cost a full container of rework.
Request a PPAP Level 3 package including the Part Submission Warrant, a Quality Control Plan, Process FMEA, dimensional results, material test reports, MSA and SPC data, plus a First Article Inspection Report and final inspection reports for every shipment.

Samples prove a supplier can make one good part. Quality documents prove the supplier can make good parts repeatedly. That distinction is the entire game in stamping, where a worn die drifts out of tolerance gradually and silently.
The PPAP package, broken down
For automotive and demanding industrial work, PPAP documentation 6 at Level 3 is the standard gate before mass production. Here is what each element actually tells you:
| PPAP Element | What It Proves |
|---|---|
| Part Submission Warrant (PSW) | Supplier formally declares the part meets all requirements |
| Design records | The supplier is building to your latest drawing revision |
| Process FMEA | Failure modes were identified and mitigated before production |
| Quality Control Plan | Every critical feature has a defined check, frequency, and method |
| Dimensional results | A multi-piece study confirms real parts match the drawing |
| Material test results | The steel matches the EN 10204 certificate |
| MSA studies | The measuring equipment itself is trustworthy |
| SPC data | The process is statistically stable, typically Cpk ≥ 1.33 on critical features |
Ongoing documents after approval
PPAP is the entry ticket. After that, request a First Article Inspection Report whenever tooling is modified or production restarts after a long pause. Then require a final inspection report with every shipment, covering dimensions, hardness where relevant, and coating thickness. On our projects, our team performs final inspection before containers close, precisely because a report generated after loading protects nobody.
If your parts are automotive Tier 1 or Tier 2, verify the supplier holds IATF 16949 standards certification 7, not just ISO 9001. For general industrial hardware, ISO 9001 with a solid control plan is usually acceptable. Match the certification requirement to the risk, and put it in the purchase order.
How can I clearly communicate GD&T tolerances to Asian suppliers to prevent misunderstandings?
Our engineers in China and Vietnam review hundreds of European drawings each year. The most common failure we see is not bad manufacturing. It is a datum scheme the supplier interpreted differently than the designer intended.
Communicate GD&T clearly by stating the standard used (ASME Y14.5 or ISO GPS), defining datums from functional mounting surfaces, marking critical characteristics explicitly, providing an annotated tolerance explanation sheet, and confirming interpretation through a supplier drawing review before tooling begins.
/12-05-2025-Pictures%20-%20Name/Hydraulic%20press%201.jpg)
GD&T is a language. Like any language, both sides must speak the same dialect. ASME Y14.5 and ISO GPS look similar but differ in default interpretations, and assuming your supplier knows which one you mean is how misunderstandings start.
A practical process that prevents rework
We use a simple sequence on every stamping project, and it has nearly eliminated interpretation disputes:
- Declare the standard on the drawing. Write "Interpret per ASME Y14.5" or the ISO equivalent in the title block. Never leave it implied.
- Choose functional datums. For a stamped bracket, the datum should be the mounting face and locating holes that matter in assembly, not a convenient edge.
- Flag critical characteristics. Mark the three to five dimensions that control fit and function. Suppliers will focus their Quality Control Plan and SPC effort there.
- Send a tolerance explanation sheet. One annotated page explaining position callouts and profile tolerances in plain language removes ambiguity for engineers working in a second language.
- Hold a drawing review call. Before tooling starts, ask the supplier to walk you through their interpretation. Ten minutes here saves ten weeks later.
- Validate with the FAI. Check the First Article Inspection Report against your GD&T callouts feature by feature, ideally with digital metrology or 3D scanning data for complex formed surfaces.
When to simplify instead
GD&T is powerful, but it is not always necessary. For a simple flat clip with two holes, linear tolerances per ISO 2768 are easier to interpret and harder to get wrong. Here is how we decide:
| Part Situation | Recommended Approach |
|---|---|
| Simple flat part, few features | Linear tolerances, ISO 2768 medium |
| Multi-bend bracket in an assembly | GD&T with position and profile callouts |
| Mating parts from different suppliers | Full GD&T with shared datum scheme |
| Prototype or low volume | Linear tolerances plus critical notes |
Match the complexity of the language to the complexity of the part. Clarity beats sophistication every time.
Conclusion
Strong documents make strong stamping projects. Prepare drawings, compliance declarations, and PPAP requirements upfront, and non-conformance risk drops sharply. Audit your sourcing checklist today, before the next order ships.
Frequently Asked Questions
What drawings and specifications do I need to prepare before contacting a stamping supplier?
When our project team in Vietnam receives a new stamping RFQ, the first thing we check is the drawing package. A weak drawing package tells us the project will struggle later.
How do I ensure my technical documents meet CE, RoHS, and REACH requirements for European compliance?
A purchasing manager once told me his previous supplier shipped perfect zinc-plated clips with hexavalent chromium 3 in the passivation layer. The whole lot was unsellable in the EU. Nobody had asked.
What quality control documents should I request to avoid non-conforming stamping parts?
Early in my sourcing career, I approved a supplier based on samples alone. The samples were hand-finished. Mass production was not. That lesson cost a full container of rework.
Footnotes
1. Official website for Dutch Customs, providing authority on import procedures in the Port of Rotterdam. ↩︎
2. Authoritative Wikipedia overview of the international standard for general geometrical tolerances in manufacturing. ↩︎
3. Official ECHA substance information for hexavalent chromium, a restricted chemical under European RoHS and REACH regulations. ↩︎
