Skip to main content

🇻🇳 178 profiles · Engineering review

Vietnam Manufacturing

What Technical Documents Are Needed to Customize Stamping Parts?

July 23, 2026

Stamping press on the production floor at Kim Thien Thuy Rainy, a DEWIN-audited Vietnamese factory

Technical documents required for customizing stamping parts overview

Every week, our sourcing team receives RFQs for custom stamping parts missing critical technical documents. The result? Wrong quotes, wrong tooling, rejected shipments—and frustrated buyers who lose months.

To customize stamping parts, you need a controlled 2D drawing with tolerances, a 3D CAD model (STEP or IGES), material specifications with thickness, a bill of materials, quantity forecasts, surface finish requirements, quality standards (PPAP or FAI), and material certifications for traceability.

Let me walk you through each document category. I will explain what suppliers actually need, why it matters, and how to prepare a package that gets you an accurate quote the first time.

What Drawing Specifications Should I Include for Custom Stamping Parts?

A few years back, a U.S. client sent our Vietnam office a bracket "drawing" that was really a photo with hand-written dimensions. We spent three weeks clarifying details before we could even quote.

Your drawing package for custom stamping parts should include a controlled 2D drawing (PDF or DWG) with full dimensions, tolerances, GD&T callouts, datums, burr direction, revision level, and critical-to-function markings, plus a 3D CAD model in STEP or IGES format for tooling design.

Drawing package requirements including 2D drawings, tolerances, GD&T, and 3D CAD models for stamping parts

The 2D drawing and the 3D model do different jobs. Many buyers confuse them. The 3D model shows the geometry. Suppliers use it to plan the strip layout, design the progressive die 1, and run forming simulations. The 2D drawing is the legal document. It controls what "good" means. It carries the tolerances, notes, and inspection intent that your supplier must meet.

The 2D Drawing: Your Contract in Graphic Form

In our experience managing stamping projects across Vietnam and Taiwan, the drawing is where most quality disputes start or get prevented. Here is what a complete 2D drawing must carry:

Drawing Element What It Defines Why It Matters
Full dimensions Every feature size and position Enables accurate tooling and inspection
Tolerances Allowable variation per dimension Drives die precision and cost
GD&T callouts Flatness, position, perpendicularity Controls form after bending and springback
Datums Measurement reference points Ensures supplier and buyer measure the same way
Burr direction Which side the shear burr faces Critical for clips, terminals, and safety edges
Revision level Current design version Prevents building to obsolete data
Critical dimensions Function-defining features Focuses inspection where it counts

Mark Critical Dimensions—And Loosen the Rest

Not every dimension deserves a tight tolerance. When we co-develop mounting brackets with clients, we push for one discipline: mark critical-to-function dimensions 2 clearly, and relax everything else to standard stamping tolerances. Over-tight tolerances on non-critical features inflate tooling cost and slow production without improving the part.

Revision Control Is Not Optional

Always state the revision level on the drawing and in your email. Engineering changes affect tooling. If your supplier builds a die to Rev A while your team has moved to Rev C, you pay twice. We log every revision in our project files and confirm the active revision before any tooling steel gets cut.

✔ The 2D drawing, not the 3D model, is the controlling document that defines acceptance criteria for a stamped part True
The 3D model conveys geometry for tooling design, but the 2D drawing carries the tolerances, datums, notes, and revision level that legally define whether a part conforms.
✘ Sending only a 3D CAD file is enough for a supplier to quote and produce custom stamping parts accurately False
A 3D model alone contains no tolerances, burr requirements, or inspection intent, forcing the supplier to guess—which leads to pricing risk, assumptions, and potential nonconforming parts.
Video: Sample metal parts from audited Vietnamese factories in the DEWIN network. (@dewintech)

How Do I Prepare a Bill of Materials for My Stamping Project?

One purchasing manager we work with in the U.S. once told me his previous supplier shipped brackets in the wrong steel grade—because the BOM only said "steel." That single word cost him a full production run.

Prepare a stamping BOM by listing each part number, description, material grade and temper, sheet thickness, surface finish or coating, quantity per assembly, annual volume forecast, and packaging requirements. Include revision levels and reference the controlling drawing for every line item.

Bill of materials preparation with part numbers, material grades, and quantity forecasts for stamping projects

A bill of materials 3 for stamping looks simple, but it drives quoting, purchasing, and scheduling on the supplier side. When our team in Singapore reviews an incoming BOM, we check whether it answers four questions: what exactly is the part, what is it made of, how many do you need, and when do you need them. If any answer is vague, the quote will be vague too.

Build Your BOM Line by Line

Follow this sequence for each stamped component:

  1. Part number and description. Use your internal number and a plain-language name, such as "Z-clip, panel retention."
  2. Reference the drawing and revision. Every BOM line should point to a controlled drawing at a specific revision.
  3. Material callout. State the grade, temper, and applicable standard—for example, SPCC, 1050 aluminum H14, or 301 stainless half-hard.
  4. Thickness and thickness tolerance. Sheet gauge affects forming, springback, and die clearance. Never leave it implied.
  5. Finish and coating. Zinc plating, passivation, powder coat, or bare metal—state it, with thickness ranges where relevant.
  6. Quantity structure. Give prototype quantity, first order quantity, and estimated annual usage. Tooling amortization depends on volume.
  7. Packaging and labeling. Specify layer padding, box counts, and label content, especially for parts with cosmetic surfaces.

Quantity Data Changes Everything

Volume determines the manufacturing approach. Here is how we typically see it play out:

Annual Volume Likely Process Documentation Impact
Under 1,000 pcs Laser cut + press brake Lighter BOM, prototype-level docs
1,000–50,000 pcs Single-stage or compound die Standard BOM plus tooling plan
50,000+ pcs Progressive die Full BOM, strip layout, PPAP-level control

When clients share honest forecasts, we can recommend the right tooling investment. When they guess high to get a low unit price, the tooling gets over-built and the relationship suffers later. Be straight with your numbers.

What Quality Standards and Tolerances Should I Specify in My Technical Documents?

There is a trade-off I weigh on nearly every stamping project: tighter tolerances raise confidence but also raise cost, tooling maintenance, and scrap rates. The skill is knowing where tight control actually earns its keep.

Specify standard stamping tolerances (typically ±0.1 mm for blanked features, ±0.25 mm or ±1° for bends) for non-critical dimensions, tight tolerances only for critical-to-function features, plus AQL sampling levels, inspection methods, and any PPAP or FAI requirements in your technical documents.

Quality standards and tolerances including AQL sampling, PPAP, and FAI requirements for stamping parts

Quality requirements belong in writing, not in follow-up emails after the first bad shipment. Our process control work in Vietnam has taught us that suppliers deliver what the documents demand—no more, no less. If your documents are silent on inspection, you will get whatever the supplier's default happens to be.

Realistic Tolerances by Feature Type

Stamping is precise, but each operation has natural limits. Use this as a starting reference when you set tolerances:

Feature Typical Achievable Tolerance Notes
Punched hole diameter ±0.05 to ±0.1 mm Depends on material and thickness
Hole-to-hole position ±0.1 mm Best within one die station
Blank outline ±0.1 to ±0.2 mm Larger parts drift wider
Bend angle ±1° Springback varies by material temper
Bend-to-edge distance ±0.25 mm Affected by material stretch
Flatness 0.1–0.3 mm per 100 mm Tighter needs restrike operations

If a dimension truly needs more precision than these ranges, flag it as critical and expect a discussion about secondary operations and cost.

Define How Parts Get Inspected

Numbers alone are not enough. Your documents should also state the inspection method and sampling plan. We recommend specifying: the AQL level for lot acceptance, which dimensions require 100% check versus sampling, the measurement tools expected (calipers, CMM, optical comparator), and whether you want dimensional reports with each shipment. For new tooling, require a First Article Inspection Report before production release. On our projects, no die runs production until the FAI is signed off by both sides. That single gate prevents most "right first time" failures that plague buyers sourcing from Asia.

Springback Deserves a Note

Formed parts spring back after bending. Good suppliers pre-compensate the die, sometimes using forming simulation. If your part has multiple bends—like the Z-clips and stepped brackets we handle regularly—state clearly which surfaces and angles are functional so compensation targets the right features.

✔ Applying tight tolerances only to critical-to-function dimensions lowers tooling cost without hurting part quality True
Tight tolerances demand more precise dies, more maintenance, and more inspection; reserving them for functional features keeps quality where it matters while controlling cost.
✘ Specifying the tightest possible tolerance on every dimension guarantees a better stamped part False
Blanket tight tolerances raise tooling cost, slow production, and increase rejection of functionally good parts—without improving how the part actually performs.

Which Material Certifications Do I Need When Sourcing Stamping Parts from Asia?

During a supplier audit in Vietnam last year, our team asked a stamping house for the mill certificate behind a batch of galvanized brackets. They could not produce it. We removed them from the shortlist that same day—traceability is not negotiable for parts headed to U.S. customers.

When sourcing stamping parts from Asia, require mill test certificates showing chemical composition and mechanical properties, a Certificate of Conformity per shipment, RoHS/REACH declarations where applicable, plating certifications for coated parts, and PPAP documentation (commonly Level 3) for automotive components.

Material certifications needed for sourcing stamping parts from Asia including PPAP and RoHS

Material certification is your proof chain. It connects the raw coil that entered the press to the finished bracket in your warehouse. Without it, you cannot answer your own customer's questions, and you have no recourse if a field failure traces back to substandard material.

The Core Certification Set

For most industrial stamping projects, we assemble this document package for our clients:

  • Mill Test Certificate (MTC). Issued by the steel or aluminum mill. It shows heat number, chemical composition, tensile strength 4, yield strength, elongation, and hardness. Match the heat number to your production lot.
  • Certificate of Conformity (CoC). The supplier's signed statement that the shipment meets your drawing and specification at the stated revision.
  • Plating or coating certification. For zinc-plated, passivated, or powder-coated parts, this confirms coating type, thickness, and salt-spray performance where specified.
  • RoHS and REACH declarations. Required for parts entering electronics and many European supply chains. Confirm restricted substances are absent. RoHS and REACH declarations 5
  • Inspection reports. Dimensional results tied to the FAI or per-lot sampling, so quality claims are backed by data.

Automotive and Regulated Industries: PPAP

If your stamped part goes into an automotive assembly, expect PPAP requirements 6. Level 3 is the most common submission for new parts. A Level 3 package typically includes design records, engineering change documentation, process flow, PFMEA 7, control plan, measurement system analysis, dimensional results, material and performance test results, and the Part Submission Warrant. We manage PPAP submissions on behalf of clients precisely because assembling this package across a language gap is where many Asia-sourcing projects stall.

Traceability Is the Point

Ask your supplier one question before ordering: "If I give you a part from this shipment in two years, can you tell me its material heat number?" If the answer is no, the certifications are decoration, not protection. On our managed projects, lot codes on packaging link back to the MTC, the inspection report, and the production date. That chain is what protects you.

✔ A mill test certificate should be traceable to your specific production lot through the material heat number True
The heat number links finished parts back to the exact raw material batch, enabling root-cause analysis and protecting the buyer if a material issue surfaces later.
✘ A supplier’s general Certificate of Conformity replaces the need for actual mill certificates and inspection data False
{ “@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”: [ { “@type”: “Question”, “name”: “What Technical Documents Are Needed to Customize Stamping Parts?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “To customize stamping parts, you need a controlled 2D drawing with tolerances, a 3D CAD model (STEP or IGES), material specifications with thickness, a bill of materials, quantity forecasts, surface finish requirements, quality standards (PPAP or FAI), and material certifications for traceability.” } }, { “@type”: “Question”, “name”: “What Drawing Specifications Should I Include for Custom Stamping Parts?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Your drawing package for custom stamping parts should include a controlled 2D drawing (PDF or DWG) with full dimensions, tolerances, GD&T callouts, datums, burr direction, revision level, and critical-to-function markings, plus a 3D CAD model in STEP or IGES format for tooling design.” } }, { “@type”: “Question”, “name”: “How Do I Prepare a Bill of Materials for My Stamping Project?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Prepare a stamping BOM by listing each part number, description, material grade and temper, sheet thickness, surface finish or coating, quantity per assembly, annual volume forecast, and packaging requirements. Include revision levels and reference the controlling drawing for every line item.” } }, { “@type”: “Question”, “name”: “What Quality Standards and Tolerances Should I Specify in My Technical Documents?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Specify standard stamping tolerances (typically ±0.1 mm for blanked features, ±0.25 mm or ±1° for bends) for non-critical dimensions, tight tolerances only for critical-to-function features, plus AQL sampling levels, inspection methods, and any PPAP or FAI requirements in your technical documents.” } }, { “@type”: “Question”, “name”: “Which Material Certifications Do I Need When Sourcing Stamping Parts from Asia?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “When sourcing stamping parts from Asia, require mill test certificates showing chemical composition and mechanical properties, a Certificate of Conformity per shipment, RoHS/REACH declarations where applicable, plating certifications for coated parts, and PPAP documentation (commonly Level 3) for automotive components.” } } ] }

Frequently Asked Questions

What Drawing Specifications Should I Include for Custom Stamping Parts?

A few years back, a U.S. client sent our Vietnam office a bracket "drawing" that was really a photo with hand-written dimensions. We spent three weeks clarifying details before we could even quote.

How Do I Prepare a Bill of Materials for My Stamping Project?

One purchasing manager we work with in the U.S. once told me his previous supplier shipped brackets in the wrong steel grade—because the BOM only said "steel." That single word cost him a full production run.

What Quality Standards and Tolerances Should I Specify in My Technical Documents?

There is a trade-off I weigh on nearly every stamping project: tighter tolerances raise confidence but also raise cost, tooling maintenance, and scrap rates. The skill is knowing where tight control actually earns its keep.

Manufacturing RFQ

Have a STEP Model or 2D Drawing for This Project?

Share your drawing, material, quantity and finishing requirements to begin a manufacturing quote. Confirm pricing, delivery and inspection requirements during the review.

Upload CAD & Get Quote →

This article is part of DEWIN's technical manufacturing engineering knowledge base. Factory-specific details come from each factory's profile page — please verify current information there or with our team.

Quick Sourcing Inquiry